• 한국임상수의학회지
• /
• 제39권6호
• /
• pp.353-359
• /
• 2022

Several suture patterns can be used for cystotomy closure, and a continuous suture pattern is the most commonly used. In this study, the fluid-tight ability and other suitabilities of continuous appositional sutures, such as the simple continuous suture pattern (SC), running suture pattern (RN), and Ford interlocking suture pattern (FI), were compared for cystotomy closure. Cystotomy closure was performed using each suture method in 10 cases of ex vivo swine bladders in each group. Suture time, leakage site, suture length, bursting pressure (BP), bursting volume (BV), and circular bursting wall tension (CBWT) were measured. Suture time and suture length were the shortest in RN and the longest in FI. Leakage occurred in two places: the incision line directly and the hole made by the suture. Leakage occurred through the incision line in 4 bladders of the RN group and 2 bladders of the FI group, but not in the SC group, and in the rest of the bladders, leakage occurred through the suture hole. The values of BP, BV, and CBWT increased in the order of FI, SC, and RN. Suture time and suture length can be considered as factors related to healing and side effects. In this study, leakage through the incision was found in a less appositional area; therefore, leakage through the hole could be considered an indicator of better apposition. Good apposition is one of the conditions required for ideal cystotomy closure. The bursting strength representing the fluid-tight ability can be expressed as the CBWT. RN is expected to be efficient and cause a small degree of foreign body reaction; however, it is expected to be less stable. FI has the greatest fluid-tightness ability, but it has been proposed that side effects due to foreign body reactions most frequently occur in FI. In conclusion, SC, which is expected to have a sufficient degree of fluid-tightness and appropriate recovery, is preferable to other continuous appositional suturing methods for cystotomy closure.

• 한국지능시스템학회논문지
• /
• 제14권2호
• /
• pp.216-221
• /
• 2004

This paper describes an optimal synthesis method of binary neural network for pattern recognition. Our objective is to minimize the number of connections and the number of neurons in hidden layer by using a Newly Expanded and Truncated Learning Algorithm (NETLA) for the multilayered neural networks. The synthesis method in NETLA uses the Expanded Sum of Product (ESP) of the boolean expressions and is based on the multilayer perceptron. It has an ability to optimize a given binary neural network in the binary space without any iterative learning as the conventional Error Back Propagation (EBP) algorithm. Furthermore, NETLA can reduce the number of the required neurons in hidden layer and the number of connections. Therefore, this learning algorithm can speed up training for the pattern recognition problems. The superiority of NETLA to other learning algorithms is demonstrated by an practical application to the approximation problem of a circular region.

• 한국광학회지
• /
• 제2권1호
• /
• pp.1-6
• /
• 1991

회절현상을 이용하여 복수 미세 입자의 특성 측정을 위한 격자형의 검지기를 사용한 데이터 처리방식을 제안하고 이에 따른 광학 및 신호처리 시스템을 구성하였다. 에너지 분포함수의 최대치와 최소치를 이용하여 같은 분무기로 분무된 증류수, 알코올, 실리콘 오일, 글리세린 등의 분포를 측정했는데 최대치와 최소치에 의해 구한 입자의 크기가 서로 잘 일치하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.505-514
• /
• 1998

Flow pattern of air-water two phase flow depends on the conditions of pressure void fraction and channel geometry. We classify the flow pattern by measuring the output signal of the conductivity probe. under the classified flow pattern we mount a visualization equipment on the test section and take pictures. We vary the concentration of pure solvent and polymer to measure local void fraction. We know that the maximum point position of local void fraction distribution move from the center of the pipe to the wall of the pipe as JSL increase when JSA is constant in two phase flow. But we find that the maximum point position of local void friction move from the wal of the pipe to the center of the pipe when polymer concentration increase.

• 한국지능시스템학회논문지
• /
• 제11권6호
• /
• pp.487-490
• /
• 2001

본 논문은 영상 해석 알고리즘의 하나인 원형 패턴벡터 알고리즘을 이용하여 손가락으로 커서를 제어하는 시스템을 구현하였다. 이 알고리즘을 적용하기위하여 영상에서 손 영역에만 해당하는 최대 원을 여러개 그린후 가장 큰 원의 중심점을 무게 중심점으로 사용하였으며, 무게 중심점에서 손의 외곽까지의거리를 구하여 가리키는 손가락을 찾도록 하였다. 화면상의 커서의 수평방향은 가리키는 손가락방향을 이용하여 평면 좌표로 해석하여 제어하였고, 수직방향은 모니터 중앙상단에 한대의 카메라를 사용하였기 때문에 손가락 길이를 이용하여 불연속적으로 상-중-하의 세 영역으로 제어하였다. 수직 방향의 커서이동이 불연속적이기때문에, 구축한 인터페이스 화면의 범위를 축소한 후 축소된 범위를 전체 화면으로 확대해 나감으로써 사용자가 원하는 목표지점으로 커서를 이동시킬수 있다.

• 대한안전경영과학회지
• /
• 제11권1호
• /
• pp.27-33
• /
• 2009

A study of fracture to material is getting interest in nuclear and aerospace industry as a viewpoint of safety. Acoustic emission (AE) is a non-destructive testing and new technology to evaluate safety on structures. In previous research continuously, all tensile tests on the pre-defected coupons were performed using the universal testing machine, which machine crosshead was move at a constant speed of 5mm/min. This study is to evaluate an AE source characterization of SM45C steel by using k-nearest neighbor classifier, k-NNC. For this, we used K-means clustering as an unsupervised learning method for obtained multi -variate AE main data sets, and we applied k-NNC as a supervised learning pattern recognition algorithm for obtained multi-variate AE working data sets. As a result, the criteria of Wilk's $\lambda$, D&B(Rij) & Tou are discussed.

• Structural Engineering and Mechanics
• /
• 제65권6호
• /
• pp.679-687
• /
• 2018

In composite materials technology, the fiber-reinforced polymers (FRP) have opened up new horizons in infrastructural engineering field for strengthening existing structures and components of structure. The Carbon fiber reinforced polymer (CFRP) sheets are well suited for RC columns to this application because of their high strength to weight ratio, good fatigue properties and excellent resistance to corrosion. The main focus of present experimental work is to investigate effect of shapes on axial behavior of CFRP wrapped RC columns having same cross-sectional area and slenderness ratio. The CFRP volumetric ratio and percentage of steel are also adopted constant for all the test specimens. A total of 18 RC columns with slenderness ratio four were cast. Nine columns were control and the rest of nine columns were strengthened with one layer of CFRP wrap having 35 mm of corner radius. Columns confined with CFRP wrap were designed using IS: 456:2000 and ACI 440.2R.08 provisions. All the test specimens were loaded for axial compression up to failure and failure pattern for each shaped column was investigated. All the experimental results were compared with analytical values calculated as per the ACI-440.2R-08 code. The test results clearly demonstrated that the axial behavior of CFRP confined RC columns is affected with the change in shapes. The axial deformation is higher in CFRP wrapped RC circular column as compared to square and rectangular columns. Stress-strain behaviour revealed that the yield strength gained from CFRP confinement was significant for circular columns as compare to square and rectangular columns. This behaviour may be credited due to effect of shape on lateral deformation in case of CFRP wrapped circular columns at effective confinement action.

• 한국산학기술학회논문지
• /
• 제12권6호
• /
• pp.2777-2784
• /
• 2011

본 논문에서는 비변수 추정 알고리즘을 토대로 선형배열 안테나와 원형배열 안테나로부터 수신되는 다중신호의 DOA와 적응 빔성형 알고리즘을 연구하고 분석하였다. 비변수 추정 알고리즘에서는 입사각의 함수로써 신호에너지를 추정하기 위하여 고분해능과 잡음억압을 도출하도록 비이차놈을 사용하여 규칙화 목적함수를 최소화하였다. 그리고 나서, 신호와 잡음공간 조정벡터로부터 DOA를 추정하였고, 공간벡터에 의하여 도출된 가중치 벡터를 적용하여 적응 빔성형 패턴을 개선하였다. 특히, 안테나 배열방법과 배열소자의 수에 따라 입사되는 다중신호의 방향성 판별 능력과 적응빔을 성형하는 능력을 비교하고 고찰하였다.

• 한국정밀공학회지
• /
• 제25권4호
• /
• pp.134-139
• /
• 2008

A spirally arrayed nano-pattern is designed as a model pattern for the next generation optical storage media. The pattern consists off types of embossed rectangular dot, which are 50nm, 100nm, 150nm and 200nm in length and 50nm in width. The height of the dot is designed to be 50nm. The pitch of the spiral track of the pattern is 100nm. A ER(Electron resist) master for this pattern is fabricated by e-beam lithography process. The ER is first spin-coated to be 50nm thick on a Si wafer and then the model pattern is written on the coated ER layer by e-beam. After developing this pattern written wafer in the solution, a ER pattern master is fabricated. The most conventional e-beam machine can write patterns in orthogonal way, so we made our own pattern generator which can write the pattern in circular or spiral way. This program generates the patterns to be compatible with the e-beam machine from Raith(Raith 150). To fabricate 50nm pattern master precisely, a series of experiments were done including the design compensation for the pattern size, optimization of the dose, acceleration voltage, aperture size and developing. Through these experiments, we conclude that the higher accelerating voltages and smaller aperture size are better for mastering the nano pattern which is in order of 50nm. With the optimized e-beam lithography process, a spiral arrayed 50nm pattern master adopting PMMA resist was fabricated to have dimensional accuracy over 95% compared to the designed. Using this pattern master, a metal pattern stamp will be fabricated by Ni electro plating for injection molding of the patterned plastic substrate.

• 한국전문물리치료학회지
• /
• 제15권4호
• /
• pp.50-58
• /
• 2008

The purpose of this study was to investigate the effects of the task-oriented training according to the application time with the change of motor and cognition function. Focal ischemic brain injury was produced in Sprague-Dawley rats (20 rats, $250{\pm}50$ g) through middle cerebral artery occlusion (MCAo). Before MCAo induction, all rats were trained in treadmill training and Morris water maze training for 1 week. Then they were randomly divided into groups: Group I : MCAo induction ($n_1$=5), Grop II: the application for simple treadmill task training after. MCAo induction ($n_2$=5). Group III: the application for Morris water maze cognitive task training after MCAo induction ($n_3$=5). Group IV: the application for progressive treadmill task training and Morris water maze cognitive task training after MCAo induction ($n_4$=5). Modified limb placing tests (MLPTs) and motor tests (MTs) were performed to test motor function and then Morris water maze acquisition test (MWMAT) and Morris water maze retention test (MWMRT) were performed to test cognitive function. For MTs, there were significant interactions among the groups with the time (p<.001). Group IV showed the steeper increasing pattern than those in other Groups on the 7th and 14th day. For MLPTs, there were significant interactions among the groups with the time (p<.001). The scores in Group III. IV had showed the more decreasing pattern than those in Group I, II since the 7th day and 14th day. For MWMAT, there were significant interactions among the groups with the time (p<.001). Group II found the Quadrant circular platform showed the steeper decreasing pattern than that in Group I on the 9th, 10th, 11th and 12th day. Group III. IV found the quadrant circular platform showed the slower decreasing pattern than that in Group I, II, For MWMRT, there were significant differences among the four groups (p<.001). The time to dwell on quadrant circular platform in Group IV on the 13th day was the longest compared with other groups. These results suggested that the combined task training was very effective to improve the motor and cognition function for the rats affected on their focal ischemic brain injury.