• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.49-50
• /
• 2014

In this paper, a wideband loop antenna for UWB applications is studied. The proposed wideband loop antenna consists of a circular loop and circular sectors. Circular sectors with a ultra-wideband characteristic are used to connect the circular loop and the center feed points. Optimal design parameters are obtained by analyzing the effects of the gap between the circular sectors and the radius of the circular loop on the input reflection coefficient and gain characteristics. The optimized wideband loop antenna is fabricated on an FR4 substrate with a dimension of $41mm{\times}41mm$. Experimental results show that the antenna has a desired UWB characteristic with a frequency band of 3.1-11.0 GHz for a VSWR < 2.25.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.2
• /
• pp.17-23
• /
• 1972

In this paper, the radiation characteristics of a large circular loop antenna with sinusoidal current distribution is studded in a moving media with a constant velocity much less than the speed of light. The diameter of the circular loop antenna is comparable with or larger than wave length. In studing the radiation characteristics, vector potential for the antenna is derived and relative field pattern is plotted from the vector potentials. Finally the field patterns are compared with those of stationary media. It is found that maximum directivities are shifted to the direction of the velocity of the media, and the field intensities are decreased in that direction and increased in opposite direction by the velocity component paralell to the loop plane. It is also found that the deviations for the pattern are proportional to the velocity of the media, the frequency of the distributed current, the diameter of the loop antenna, and the daviation depends only upon the parallel component of the velocity to the loop plane.

• Journal of information and communication convergence engineering
• /
• v.14 no.4
• /
• pp.222-226
• /
• 2016

A design method for a compact square loop antenna fed by a microstrip (MS) line for indoor digital television (DTV) applications is proposed. The proposed antenna consists of a square loop, circular sectors, and an MS line. The square loop combined with circular sectors is printed on one side of a substrate, and a $75-{\Omega}$ MS line is printed on the other side. The circular sectors are used as a wideband balun or transition to connect the MS line and the square loop. A prototype of the proposed square loop antenna operating in the DTV band (470-806 MHz) is designed and fabricated on an FR4 substrate. Experimental results show that the proposed antenna has the desired impedance characteristics in the frequency band of 464-1,220 MHz (89.8%) for a voltage standing wave ratio (VSWR) of <2 covering the DTV band, and a broadside gain of 0.8-3.3 dBi in the DTV band.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.3
• /
• pp.12-18
• /
• 1970

In this paper, the radiation characteristics of a Circular Loop Antenna is studied in a moving homogeneous, isotropic and linear media with a constant velocity much less than the speed of light. In Stuffing the radiation characteristics, Srst vector potential on the loop antenna is derived in the moving media by appling Maxwell-Minkowaski's theory. Next, using the derived relations, the electric and magnetic Seld is calculated for the spec-i Sed wave length ana velocity of the media. The Seld patterns in the moving media are compared with those of stationary media. We find that the intensity of the field is reduced in the direction of the media velocity and increased in the opposite direction only for the component parallel with the plane of the antenna. The deviation from the stationary media is proportional to the velocity of the media and the frequency of source current.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2816-2822
• /
• 2014

In this paper, a wideband loop antenna for UWB applications is studied. The structure of the proposed wideband loop antenna is a circular loop antenna with appended circular sectors to obtain an ultra-wideband characteristic. The circular sectors are used instead of conventional triangular sectors to match with the 50 ohm feed line. Optimal design parameters are obtained by analyzing the effects of the gap between the circular sectors and the radius of the circular loop on the input reflection coefficient and gain characteristics. The optimized wideband loop antenna is fabricated on an FR4 substrate with a dimension of 41 mm by 41 mm. Experiment results show that the proposed antenna has a frequency band of 3.1-11.0 GHz for a VSWR < 2.25, which assures the operation in the UWB band. Measured gain ranges 1.3-5.3 dBi in the UWB band.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.290-292
• /
• 2002

In this paper, we present a simple design method and measurement results for circular loop antenna arrays, which can be used for LS band operation, such as access point antennas in the wireless LAN system. It has been shown that the input impedance of a circular loop can be adjusted near 100 $\Omega$ using a short stub. The length of the stub can be immediately determined in the work place through the measurement of S11 with a network analyzer. Fabricated arrays show high antenna gains as much as 12.4㏈i and 15.1 ㏈i at the center frequency of 2.45 ㎓ for 4${\times}$l and 4${\times}$2 array, respectively. These types of loop arrays can be fabricated at a low cost.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1845-1851
• /
• 2016

In this paper, a design method for a wideband square loop antenna for Digital TV applications is studied. The proposed loop antenna is a square loop antenna combined with circular sectors to connect with central feed points. The square loop is used instead of the circular loop in order to miniaturize the antenna size. The input reflection coefficient and gain characteristics of the proposed antenna are analyzed to match with the 75 ohm port impedance for DTV applications. The effects of the gap between the circular sectors and the length of the square loop on the input reflection coefficient and gain characteristics are examined to obtain the optimal design parameters. The optimized antenna is fabricated on an FR4 substrate, and the experiment results show that it operates in the frequency band of 470-1,300 MHz for a VSWR < 2, which assures the operation in the DTV band.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.245-248
• /
• 2005

In this paper, small sized half-wavelength circular loop antenna which attached beneath a visor of helmet is designed and fabricated at the resonant frequency of 449MHz. To reduce the size of the antenna, double series-shorted stubs are inserted inside the loop for practical use of a vacant space of loop inside. Also, It is designed for the printed type to install the helmet easily. The size of antenna on helmet is reduced to 87.75%(diameter : 70mm, height :.36mm) compare with general type antenna(diameter : 200mm height 101mm). The return loss, -10dB bandwidth and gain are -13.2dB, 17.6MHz(3.9%), and -1.78dBd. And, radiation pattern is omni-directional pattern at H-plane. Therefore, it can be seen that the half-wavelength circular loop antenna using double series-shorted stubs is proper structure for the miniaturization and the installed antenna of the helmet.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.581-586
• /
• 2020

In this paper, the design process and method for a compact wideband loop antenna for terrestrial digital TV (DTV) and ultra high definition (UHD) TV applications was proposed. Horizontal slits were added on the two circular sectors of the proposed loop antenna in order to miniaturize the existing wideband loop antenna consisting of a square loop and two circular sectors. A CPW transmission line was inserted in the center of the lower circular sector as a feed line. The CPW feed line was designed using the 75 ohm port impedance for DTV and UHD TV applications, and a tapered center-signal line was designed to improve the impedance matching. The final designed antenna was fabricated on an FR4 substrate with a thickness of 0.8 mm. The experiment results show that the proposed compact loop antenna operates in the frequency band of 444.3-820.1 MHz for a VSWR < 2, which fully covers the DTV and UHD TV bands.

• Journal of electromagnetic engineering and science
• /
• v.18 no.2
• /
• pp.129-135
• /
• 2018

This paper proposes a design of small controlled reception pattern antenna (CRPA) arrays using circular microstrip loops with frequency-insensitive characteristics. The proposed array consists of seven identical upper and lower circular loops that are electromagnetically coupled, which results in a frequency-insensitive behavior. To demonstrate the feasibility of the proposed feeding mechanism, the proposed array is fabricated, and its antenna characteristics are measured in a full-anechoic chamber. The operating principle of the proposed feeding mechanism is then interpreted using an equivalent circuit model, and the effectiveness of the circular loop shape is demonstrated by calculating near electromagnetic fields in proximity to the radiator. The results confirm that the proposed feeding mechanism is suitable to have frequency-insensitive behavior and induces strong electric and magnetic field strengths for higher radiation gain in extremely small antenna arrays.