• Steel and Composite Structures
• /
• 제22권2호
• /
• pp.323-352
• /
• 2016

The results of a series of finite element (FE) simulations and experimental studies are used to develop strength and stiffness models that predict the failure capacity and response characteristics of unstiffened extended endplate connections with circular and rectangular bolt configurations associated with deep girders. The proposed stiffness models are composed of multi-linear springs which model the overall extended endplate/column flange system deformation and strength of key-components. Comparison of model predictions with FE and experimental results available in the literature show that the proposed models accurately predict the strength and the response of extended endplate/column system with circular and rectangular bolt configurations. The effect of the bolt configuration (circular and rectangular) on the prying phenomenon encountered in the unstiffened extended endplate/column system was investigated. Based on FE results, extended endplate with circular bolt configuration has a more ductile behavior and exhibits higher total prying forces. The proposed models can be used to design connections that cover all possible failure modes for extended endplate with circular bolt configuration. This study provides guidelines for engineers to account for the additional forces induced in the tension bolts and for the maximum rotational capacity demand in the connection which are required for seismic analysis and design.

• International Journal of Safety
• /
• 제8권1호
• /
• pp.1-5
• /
• 2009

The CFRP composite has unique properties that offer high strength and stiffness, even though it has light weight. Therefore it can be used in many industrial applications. When mechanical fasteners are used for joining composites, high stress concentrations appear near the edge of holes prepared for accommodating structural bolts and rivets. This presence of high stress concentrations can be a source of damage. The aim of this work is to evaluate fracture behavior and patterns of plain woven CFRP with circular hole and repairing patch element. The maximum strength and pattern for the plain woven carbon composite specimen with the repaired circular hole were examined. From the results, we show that repairing of the CFRP composite specimen with ($\pi$) 3~5 mm of circular hole diameter results in load rising effect and the repairing is more effective as bigger hole specimen.

• 복합신소재구조학회 논문집
• /
• 제5권4호
• /
• pp.36-43
• /
• 2014

In this study, circular sectional concrete-filled tube(CFT) column-to-foundation connections were numerically investigated in order to improve their structural details. A inner reinforced specimen with high-tension bolts and inner deformed bars was adopted from a previous experimental study to make the numerical model. The validity of the numerical method was verified through comparing the experimental results with the analysis's ones. In order to optimize design variables about the inner reinforced model, a number of numerical analyses were conducted for various variables. Finally, this study suggested the optimum variables about the reinforced circular sectional CFT column-to-foundation connections.

• Structural Engineering and Mechanics
• /
• 제24권4호
• /
• pp.463-478
• /
• 2006

The design of structural frameworks for buildings is constantly evolving and is dependent on regional issues such as loading and constructability. One of the most promising recent developments for low to medium rise construction in terms of efficiency of construction, robustness and aesthetic appearance utilises concrete-filled steel tubular sections as the columns in a moment-resisting frame. These are coupled to rigid or semi-rigid connections to composite steel-concrete beams. This paper includes the results of a pilot experimental programme leading towards the development of economical, reliable connections that are easily constructed for this type of frame. The connections must provide the requisite strength, stiffness and ductility to suit gravity loading conditions as well as gravity combined with the governing lateral wind or earthquake loading. The aim is to develop connections that are stiffer, less expensive and easier to construct than those in current use. A proposed fabricated T-stub connection is to be used to connect the beam flanges and the column. These T-stubs are connected to the column using "blind bolts" with extensions, allowing installation from the outside of the tube. In general, the use of the extensions results in a dramatic increase in the strength and stiffness of the T-stub to column connection in tension, since the load is shared between membrane action in the tube wall and the anchorage of the bolts through the extensions into the concrete.

• 한국강구조학회 논문집
• /
• 제28권2호
• /
• pp.121-128
• /
• 2016

고장력 볼트를 적용한 원형단면 콘크리트 충전 강재 기둥-기초 연결부의 합리적인 설계범위를 제안하기 위하여 축하중과 수평하중을 동시에 받는 기둥-기초 연결부의 전반적인 구조적 거동과 설계변수에 따른 거동특성을 상용 유한요소해석 프로그램인 ABAQUS를 이용하여 해석적으로 검토하였다. 이를 위해 앵커볼트를 고장력 볼트로 대신하는 선행연구의 실험을 토대로 수치해석을 실시하였으며, 해석방법의 타당성을 검증하였다. 또한 현행 설계기준을 분석하여 기둥-기초 연결부 거동에 영향을 미치는 설계변수(앵커의 묻힘깊이, 앵커의 강종, 리브의 높이, 리브의 두께)를 선정하였으며, 설계변수에 따른 기둥-기초 연결부의 거동특성을 비교 분석하였다. 일반 앵커에 비해 고장력 볼트를 적용하는 것이 기둥-기초 연결부의 거동에 유리한 것으로 나타났으며, 고장력 볼트의 최소 묻힘깊이는 기둥 직경(D)을 기준으로 0.5D이상으로 설계하는 것이 합리적이라고 판단된다. 리브의 높이는 0.5D이상, 리브의 두께는 베이스플레이트 두께($t_b$)를 기준으로 $0.4t_b$이상으로 설계하는 것이 합리적이라고 판단된다.

• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.1067-1085
• /
• 2016

Recent research on steel moment-resisting connection between steel beams and concrete filled steel tubes has shown that there are considerable advantages to be obtained by anchoring the connection to the concrete infill within the tube using anchors in blind bolts. In the research reported here, extensive experimental tests and numerical analyses have been performed to study the anchorage behaviour of cogged deformed reinforcing bars within concrete filled circular steel tubes. This data in essential knowledge for the design of the steel connections that use anchored blind bolts, both for strength and stiffness. A series of pull-out tests were conducted using steel tubes with different diameter to thickness ratios under monotonic and cyclic loading. Both hoop strains and longitudinal strains in the tubes were measured together with applied load and slip. Various lead-in lengths before the bend and length of tailed extension after the bend were examined. These dimensions were limited by the dimensions of the steel tube and did not meet the requirements for "standard" cogs as specified in concrete standards such as AS 3600 and ACI 318. Nevertheless, all of the tested specimens failed by bar fracture outside the steel tubes. A comprehensive 3D Finite Element model was developed to simulate the pull-out tests. The FE model took into account material nonlinearities, deformations in reinforcing bars and interactions between different surfaces. The FE results were found to be in good agreement with experimental results. This model was then used to conduct parametric studies to investigate the influence of the confinement provided by the steel tube on the infilled concrete.

• 터널과지하공간
• /
• 제18권6호
• /
• pp.427-435
• /
• 2008

본 연구에서는 지반등급 V중에서 막장자립이 곤란한 지반에 대해 지반고유의 지지력을 최대한 이용하기 위한 굴착공법 및 적정벤치길이에 대해 검토하고, 보조공법으로 막장볼트를 적용할 경우 타설 패턴, 타설 개수에 따라 막장 및 막장주변지반에 어떠한 영향이 발생되는지에 대해 3차원 FEM해석을 수행하였다. 보조벤치 병용전단면공법이 조기 단면폐합으로 변위를 크게 줄일 수 있음을 알 수 있었으며, 타설 패턴으로는 격자상, 교호배치형(지그재그형), 원주상순으로 변위억제효과가 있는 것으로 나타났다. 또한 타설 개수 증가에 따라 막장축방향 수평변위에 대해 억제효과가 있는 것으로 분석되었으며 보조벤치 병용 전단면공법굴착시공의 경우 막장부 $1.5m^2$에 1개의 막장볼트(격자상) 타설로 막장면 안정성을 확보할 수 있을 것으로 판단되었다.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.961-968
• /
• 2022

Hydrogen embrittlement leads to the damages in bolts, nut, especially, high pressure valves, in the semiconductor facilities, hydrogen vehicles, hydrogen stations and so on. Monel material has higher strength than SUS material. Therefore, even though Monel material with special alloy is usually used to prevent the hydrogen embrittlement, it needs powerful drawing system to manufacture the rectangular or hexagonal bar using circular bar. The purpose of this study is to investigate the characteristics of plastic deformation of Monel material and 2 rollers of rolling unit in plastic limit through numerical analysis. As the results, it was predicted that, based on mean stress, as the rolling step was increased, the rolling force of rolling unit was decreased. In addition, the heat treatment for Monel material was needed because of residual stress due to plastic deformation. As for rollers, the roller was safe about 1.86 times compared with that of ultimate strength. In this study, as the roller 2 showed larger stress than roller 1, thus, roller 2 should be designed carefully to guarantee the safety. Further it was confirmed that the reaction force of roller could be helpful in bearing design.

• 터널과지하공간
• /
• 제9권3호
• /
• pp.194-203
• /
• 1999

본 연구에서는 록볼트의 역학적 거동을 파악하기 위하여 지하공동에 설치된 단일 록볼트에 발생하는 축응력 분포, 록볼트-그라우트 접촉면에서의 전단응력 분포와 중립점의 위치를 분석하였으며, 현장의 다양한 지질조건에 대한 록볼트의 보강효과를 분석하기 위하여 여러가지 지반조건과터널크기에서 록볼트의 설치간격과설치길이를 변화시키며 전산해석을 수행하였다. 전산해석결과, 최대 인장응력 및 전단응력의 분포를 파악할 수 있었으며, 중립점의 위치에 영향을 주는 인자가 공동의 굴착폭임을 알 수 있었다. 또한 패턴볼팅으로 보강된 원형공동에서 록볼트에 의한 암반의 봉압효과는 응력 증가비를 사용하여 분석하였으며, 소성대 감소효과와지반 변위 감소효과는 각각 소성대 감소비와 변위 감소비를 사용하여 분석하여 록볼트의 보강효과 경향을 파악할 수 있었다. 이러한 보강효과의 경향분석 결과는 실제 터널의 안정적 설계에 적용할 수 있을 것으로 판단된다.

• 디지털융복합연구
• /
• 제16권3호
• /
• pp.303-309
• /
• 2018

컴퓨터 비전 기술은 인공지능의 한 분야로 인간의 눈의 기능을 기계가 수행 할 수 있도록 카메라로부터 영상 이미지를 취득하고, 알고리즘을 통하여 분석하고 판별한 후 생산부품의 양품과 불량을 판별하는 부품 검사에 많이 적용되고 있다. 볼트 생산 시스템에서 생산되는 볼트 탭의 유무를 컴퓨터 비전 기술을 적용하여 자동으로 불량품을 선별하는 장치를 개발하였다. 형상검사 방법으로는 라인 스캔방식으로 검사영역의 시작점과 끝점의 위치를 파악하여 높이를 측정하는 방법을 사용하였으며, 볼트 탭의 유무를 판별하기 위한 방식으로는 원형 스캔방식으로 검사영역의 평균 밝기 값의 차이를 측정하여 유사도를 구하는 방식을 사용하였다. 두 종류의 볼트 탭의 검사 성능실험에서 총 검사에 소요되는 시간은 분당 300개 검사가 가능하며, 완벽한 검사 정확도를 나타내어 생산라인에서 검사의 정확성과 효율성을 입증하였다.