• Journal of Positioning, Navigation, and Timing
• /
• 제12권1호
• /
• pp.59-65
• /
• 2023

A GNSS receiver must perform signal acquisition to estimate the code phase and Doppler frequency of the incoming satellite signals, which are essential information for baseband signal processing. Modernized GNSS signals have different modulation schemes and long PRN code lengths from legacy signals, which makes it difficult to acquire the signals and increases the computational complexity and time. This paper proposes a novel FFT/Inverse-FFT with baseband resampling to resolve the aforementioned challenges. The suggested algorithm uses a single block only for the FFT and thereby requires less hardware resources than conventional structures such as Double Block Zero Padding (DBZP). Experimental results based on a MATLAB simulation show this algorithm can successfully acquire GPS L1C/A, GPS L2C, Galileo E1OS, and GPS L5.

• Computers and Concrete
• /
• 제24권5호
• /
• pp.423-436
• /
• 2019

Design equations to evaluate the bursting force in a post-tensioned anchorage zone have been introduced in many design codes, and one equation in AASHTO LRFD is widely used. However, this equation may not determine the bursting force exactly because it was designed on the basis of two-dimensional numerical analyses without considering various design parameters such as the duct hole and shape of the bearing plate. To improve the design equation, modification of the AASHTO LRFD design equation was considered. The behavior of the anchorage zone was investigated using three-dimensional linear elastic finite element analysis with design parameters such as bearing plate size and diameter of sheath hole. Upon the suggestion of a modified design equation for evaluating the bursting force in an anchorage block with a rectangular anchorage plate (Kim and Kwak 2018), additional influences of design parameters that could affect the evaluation of bursting force were investigated. An improved equation was introduced for determining the bursting force in an anchorage block with a circular anchorage plate, using the same procedure introduced in the design equation for an anchorage block with a rectangular anchorage plate. The validity of the introduced design equation was confirmed by comparison with AASHTO LRFD.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.196-197
• /
• 2005

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 추계학술대회 논문집
• /
• pp.1-13
• /
• 1991

This paper describes two FMS, which were developed by SAEIL Heavy Industries. One is FMS for machining of circular parts, that are automobile's axle shafts. This system consists of 13 units, including 7 CNC machine tools. The other is FMS for machining of non-circular parts namely casted or steel block within size of 1.2 X 1.2 X 1.5m. This FMS consists of 8-machining centers, 1-automated warehouse, 2-unmanned Robo Trailers, and computer control room. All systems are functioning satisfactorily and so help greately towards automation of Korean industries.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.7-22
• /
• 1991

This paper describes two FMS, which were developed by SAEIL Heavy Industries. One is FMS for machining of circular parts, that are automobile's axle shafts. This system consists of 13units, including 7CNC machine tools. The other is RMS for machining of non- circular parts namely casted or steel block within size of 1.2${\times}$1.2${\times}$1.5m. This FMS consists of 8-machining centers, 1-automated werehouse, 2,-unmanned Robo Trailers, and computer control room. All systems are functioning satisfactorily and so help greately towards automation of Korean industries.

• International Journal of Ocean System Engineering
• /
• 제3권2호
• /
• pp.95-101
• /
• 2013

This study is mainly interested in roundness of a circular moonpool structure in FPSO. Because this structure needs abrasion-resistance on inner wall, we should do buttering widely and deeply by using Inconel. But a general buttering can cause a severe distortion at structures. If someone can analyze the roundness by thermal distortion under Inconel over-lay, an erection policy can be established. In this study, shrinkage methodology by designed stress-strain curve was used and the result allowed deciding an appropriate block size.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.240-240
• /
• 2000

This paper presents two algorithms based on the concept of the frequency domain adaptive filter(FDAF). First the frequency domain recursive least squares(FRLS) algorithm with the overlap-save filtering technique is introduced. This minimizes the sum of exponentially weighted square errors in the frequency domain. To eliminate discrepancies between the linear convolution and the circular convolution, the overlap-save method is utilized. Second, the sliding method of data blocks is studied Co overcome processing delays and complexity roads of the FRLS algorithm. The size of the extended data block is twice as long as the filter tap length. It is possible to slide the data block variously by the adjustable hopping index. By selecting the hopping index appropriately, we can take a trade-off between the convergence rate and the computational complexity. When the input signal is highly correlated and the length of the target FIR filter is huge, the FRLS algorithm based on the block processing technique has good performances in the convergence rate and the computational complexity.

• 대한방사선치료학회지
• /
• 제14권1호
• /
• pp.79-84
• /
• 2002

1.목적 : 작고 불규칙한 모양의 전자선 조사면에서 선원의 출력에 영향을 미치는 요인은 선형가속기의 collimation system, insert block diameter, energy 등이다. 때문에 이러한 조사면의 선량계산으로 LBR을 이용할 수 있는데 LBR(lateral build-up ratio)이란 동일한 incident fluence와 profile에 대해 circular field와 broad field의 선량비로서 나타낼 수 있다. 얻어진 LBR data는 elementary pencil beam 모형을 근거해 깊이와 에너지에 따른 함수(${\sigma}$)로 표현할 수 있다. 여기에서 얻어진 수식을 기초로 해서 만들어진 factor값이 작고 부정형의 전자선 조사면의 선량계산 유용성을 알아보고자 한다. 2.재료 및 방법: 심부선량은 water phantom에서 ion chamber로 측정하였다. Cerrobend와 electron applicator 에 따른 incident fluence의 변화를 알아보기 위해 Chamber를 0.5mm깊이에 놓고 측정하였다. 그리고 에너지와 electron applicator 크기에 따라 insert block diameter를 2-15cm로 변화시키며 심부선량을 측정하였고 이 값을 0.5mm 깊이에서 normalization 하였다. 이렇게 normalization 한 그래프로부터 LBR과 함수 (${\sigma}$)를 얻어했다. 3.결과 : 0.5mm 깊이에서 normalization한 심부선량-그래프로부터 LBR data와 그로부터 얻어낸 (${\sigma}$)함수 값을 기초로 하여 elementary pencil beam 모형의 깊이에 빠른 선량변화의 수식을 얻어낼 수 있었다. 4.결론 : 부정형 전자선 조사면에 대해 MU당 심부선량은 작은 circular field에서 측정된 LBR값, reference applicator와 insert block diameter 에 따른 incident fluence factor 그리고 reference broad field에서의 심부선량등 세 가지 data로 부터 계산할 수 있다. 이 방법을 이용하면 어떤 모양의 전자선 조사면에 대해서도 심부선량의 계산에 유용하다고 할 수 있다.

• Journal of electromagnetic engineering and science
• /
• 제7권1호
• /
• pp.28-34
• /
• 2007

In this paper, we present a quasi-Jacket block matrices over binary matrices which all are belong to a class of cocyclic matrices is the same as the Hadamard case and are useful in digital signal processing, CDMA, and coded modulation. Based on circular permutation matrix(CPM) cocyclic quasi block low-density matrix is introduced in this paper which is useful in coding theory. Additionally, we show that the fast algorithm of quasi-Jacket block matrix.

• 대한의생명과학회지
• /
• 제10권2호
• /
• pp.65-73
• /
• 2004

I report that single-stranded antisense as a part of large circular (LC-) genomic DNA of recombinant M13 phage exhibits enhanced stability, sequence specific antisense activity, and no need for target site search. A cDNA fragment (708 bp) of rat TNF-$\alpha$ was inserted into a phagemid vector, and TNF-$\alpha$ antisense molecules (TNF$\alpha$-LCAS) were produced as single-stranded circular DNA. When introduced into a rat monocyte/macrophage cell line, WRT7/P2, TNF$\alpha$-LCAS was able to ablate LPS-induced TNF-$\alpha$ mRNA to completion. The antisense effect of TNF$\alpha$-LCAS was shown to be sequence-specific because expressions of three control genes ($\beta$-actin, GAPDH and IL-1$\beta$) were not significantly altered by the antisense treatment. Further, TNF$\alpha$-LCAS was found to be highly efficacious as only 0.1 $\mu$g (0.24 nM) of TNF$\alpha$-LCAS was sufficient to block TNF-$\alpha$ expression in 1$\times10^5$ WRT7/P2 cells. I have also observed specific antisense activity in reduction of NF-$\kappa$B gene expression. The results suggest that an antisense sequence as a part of single-stranded circular genomic DNA has a specific antisense activity.