• Structural Engineering and Mechanics
• /
• v.58 no.5
• /
• pp.783-797
• /
• 2016

Exact solutions for stresses, strains, and displacements of a perforated rectangular plate by an arbitrarily located circular hole subjected to both linearly varying in-plane normal stresses on the two opposite edges and in-plane shear stresses are investigated using the Airy stress function. The hoop stress occurring at the edge of the non-central circular hole are computed and plotted. Stress concentration factors (the maximum non-dimensional hoop stresses) depending on the location and size of the non-central circular hole and the loading condition are tabularized.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.1
• /
• pp.47-53
• /
• 2003

이 논문은 환(環)을 형성하는 부분네트웍들로 이루어진 sparse network의 특수한 형태에서 최단거리 결정을 위한 효율적인 앨고리즘을 제안한다. 제시된 앨고리즘은 소위 비환(非換) 형태의 sparse network에 대한 최단거리 결정 앨고리즘의 확장이라 할 수 있다. 도우넛 형태를 갖는 sparse network에 대해 최단거리 결정을 위한 접근법으로 하나는 정점제거 방법이고, 다른 하나는 선분제거 방법이다. 여기서 제안된 앨고리즘은 일반적인 n-degree circular sparse network으로 확대될 수 있다.

• Journal of ILASS-Korea
• /
• v.23 no.1
• /
• pp.9-15
• /
• 2018

Breakup lengths of circular and elliptical liquid jets in a subsonic crossflow were experimentally studied. Two circular-shaped and four elliptical-shaped plain-orifice injectors, which had different aspect ratios and orifice length to diameter ratios, were used to provide various liquid jet conditions such as steady, cavitation, and hydraulic flip. By varying the injection pressure drop from 1 bar to 6 bar, spray images were taken using a shadowgraph technique. Breakup lengths were measured and analyzed. As the aspect ratio in orifices increased, liquid column breakup lengths normalized by the equivalent diameter were reduced irrespectively of the switching of the major or minor axis to the crossflow. It was also found that when hydraulic flip developed inside the orifice, x-directional breakup lengths more decreased for both circular and elliptical liquid jets.

• Steel and Composite Structures
• /
• v.27 no.6
• /
• pp.789-801
• /
• 2018

A weak-form formulation of finite annular prism methods (FAPM) based on Reissner's mixed variational theorem (RMVT), is developed for the quasi three-dimensional (3D) static analysis of two-directional functionally graded (FG) circular plates with various boundary conditions and under mechanical loads. The material properties of the circular plate are assumed to obey either a two-directional power-law distribution of the volume fractions of the constituents through the radial-thickness surface or an exponential function distribution varying doubly exponentially through it. These FAPM solutions of the loaded FG circular plates with both simply-supported and clamped edges are in excellent agreement with the solutions obtained using the 3D analytical approach and two-dimensional advanced plate theories available in the literature.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.6
• /
• pp.1-7
• /
• 2001

It is very important to test circular motion accuracy of NC machine tools as it affects all other machines machined by them in industries. In this paper, it has become possible to detect errors of linear displacement of radial directions for circle tar motion accuracy test using newly assembled magnetic type of linear scale so called Magnescale ball-bar system. It has also organized computer program systems using tick pulses come out from computer for getting error motion data at colt start time interval in circular motion test on NC lathe. Error data gotten from test is expressed to plots and analysed to numerics by various statistical treatments.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.3 no.3
• /
• pp.14-21
• /
• 1966

In this article, a recording system for nuclear radiation detection by means of circular radial deflection as an instrument and its applications are described. In the electronic circuit of the instrument, the linearity of a deflected pulse on a circular sweep is especially contribed by employing a multiplying circuit, not to mention the one of a circular time base itself. A sequence of random pulses was recorded on a circular sweep of the CRT screen by means of one cycle unblanking due to a logic circuit. It seems that the intrument is suitable for measuring a decay curve of a short-lived nuclide and its pulse spectrum

• Computers and Concrete
• /
• v.13 no.4
• /
• pp.517-529
• /
• 2014

In order to increase the load carrying capacity and/or increase the service life of existing circular reinforced concrete bridge columns, Carbon Fiber Reinforced Polymer (CFRP) composites could be utilized. Transverse wrapping of circular concrete columns with CFRP sheets increases its axial and shear strengths. In addition, it provides good confinement to the concrete column core, which enhances the bending and compressive strength, as well as, ductility. Several experimental and analytical studies have been conducted on CFRP strengthened concrete cylinders/columns. However, there seem to be lack of thorough investigation of the effect of elevated temperatures on the response of CFRP strengthened circular concrete columns. A concrete confinement model that reflects the effects of elevated temperature on the mechanical properties of CFRP composites, and the efficiency of CFRP in strengthened concrete columns is presented. Tensile strength and modulus of CFRP under hot conditions and their effects on the concrete confinement are the primary parameters that were investigated. A modified concrete confinement model is developed and presented.

• Journal of the Korean Society of Safety
• /
• v.29 no.1
• /
• pp.54-58
• /
• 2014

This study deals with the accidents of circular intersections in Korea. The goal is to develop the accident models for 94 circular intersections. In pursuing the above, this study gives particular attentions to collecting the data of geometric structure and accidents, and comparatively analyzing such the models as Poisson and NB regression and multiple regression model using SPSS 17.0 and LIMDEP 3.0. The main results are as follows. First, the negative binomial model among various models was analyzed to be the most appropriate. Second, 3 independent variables was adopted in the model, and these variables was analyzed to have a positive relation to the accident rate. Finally, the reduced width of circulatory roadway, removal of the parking lot within circulatory roadway and appropriate levels of approach lane were required to improve the safety of circular intersection.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.871-874
• /
• 2003

The T-5 Lamps developed in 1996 is the high efficiency fluorescent lamps, the lamps voltage is high, and the lamps current small because the lamps are slender tube of 16mm diameter. And so, the electrical characteristics of the Ballast for the lamps are different from of the Ballast for T-10 or T-8 lamps. Therefore, the know-how of the exclusive Ballast for the T-5 fluorescent lamps should be as soon as possible. We described the electrical and optical characteristics of the Electronic Ballast for T-5 Circular Fluorescent lamps. The developed Electronic dimming Ballast for T-5 Circular Fluorescent lamps has the 45% energy saving effects than the T-10 lamps. And it has the promotion of the THD less than 10%, CF less than 1.5%, Flickering less than 5% and 99% power factor. And it is available for two T-5 Circular fluorescent Lamps dimming, 22W and 40W.

• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.42-47
• /
• 2006

The flow around a rotating circular cylinder near a plane wall is investigated by the measurement of the lift acting on the cylinder and by the flow visualization using the hydrogen bubble technique in the circulating water tank. The experimental parameters are the rotating direction of the cylinder, the space ratios H/D$(H/D=0.05\sim0.5)$ between cylinder and plane wall and the velocity ratios $\alpha(\alpha=0\sim{\pm}2.0)$. In the case of clockwise, the lift on the rotating circular cylinder was increased with the reduction of the space ratios and with the velocity ratios, the upper separation point was more shifted in the rotating direction with them. In the case of anticlockwise, the absolute value of the lift on the rotating circular cylinder was increased with the space ratios and with the velocity ratios, the lower separation point was more shifted in the rotating direction with them.