• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.1-6
• /
• 2020

This paper proposes the design of an advanced S-Box for calculating multiplicative inverse in AES encryption process. In this approach, advanced S-box module is first designed based on composite field, and then the performance evaluation is performed for S-box with multi-stage pipelining architecture. In the proposed S-Box architecture, each module for multiplicative inverse is constructed using combinational logic for realizing both small-area and high-speed. Through logic synthesis result, the designed 3-stage pipelined S-Box shows speed improvement of about 28% compared to the conventional method. The proposed advanced AES S-Box is performed modelling at the mixed level using Verilog-HDL, and logic synthesis is also performed on Spartan 3s1500l FPGA using Xilinx ISE 14.7 tool.

• Environmental Engineering Research
• /
• v.19 no.3
• /
• pp.269-274
• /
• 2014

On-site sanitation systems are typically installed to treat grey and toilet wastewaters in areas without sewer and centralized treatment systems. It is well known that, due to inappropriate design and operation, treatment performance of these systems in developing countries is not satisfactory in the removal of pathogens and organic matters. This research aimed to investigate the hydraulic conditions occurring in some on-site sanitation systems and the effects of hydraulic retention times (HRTs) on the system performance. The experiments were conducted with a laboratory-scale septic tank (40L in size) and an actual septic tank (600L in size), to test the hydraulic conditions by using tracer study with HRTs varying at 12, 24 and 48 hr. The experimental results showed the dispersion numbers to be in the range of 0.017-0.320 and the short-circuit ratios in the range of 0.014-0.031, indicating the reactors having a high level of sort-circuiting and approaching complete-mix conditions. The removal efficiency of $BOD_5$ was found to be 67% and the $k_{30}$ values for $BOD_5$ was $2.04day^{-1}$. A modified complete-mix model based on the relationship between $BOD_5$ removal efficiencies and HRTs was developed and validated with actual-scale septic tank data having a correlation coefficient ($R^2$) of 0.90. Therefore, to better protect our environment and minimizing health risks, new generation toilets should be developed that could minimize short-circuiting and improving treatment performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1000-1006
• /
• 2007

This paper presents a power detector circuit which monitors the transmitting power for the application in CDMA cell phones. The proposed power detector are composed of coupler for coupling output power and detector fur monitoring output power. The designed coupler has low loss characteristic because it adopts the stripline structure which consists of two ground planes at both sides of signal plane. The design frequency is 824-849MHz which is the Tx band fur CDMA mobile terminal, and the coupling factor of the stripline coupler is -20dB. A schottky barrier diode is adopted for detector design because of its high speed operation with minimized loss. The required impedance matching is performed to improve the linearity and sensitivity of output voltage at relatively low detector input level where the nonlinear characteristic of diode exists. The package parasitics as well as intrinsic diode model are considered for simulation of the detector. The predicted performances agree well with the measured results.

• Development and Reproduction
• /
• v.5 no.2
• /
• pp.175-180
• /
• 2001

The ectopic expression of gonadotropin releasing hormone(GnRH and luteinizing hormone(LH) in several tissues is a quite intriguing phenomenon. Recently, the presence of GnRH and its receptor has been clearly demonstrated in rodents and human mammary gland. In this context, one can postulate that the presence of local circuit composed of GnRH and LH in the gland. The present study was undertaken to elucidate whether there is a correlation between the LH expression in rat mammary gland and physiological status during the process of mammary differentiation. LH contents in mammary gland from cycling to weaning rats were measured by radioimmunoassay(RIA). In cycling rats, changes of the LH level in both serum and mammary gland showed similar pattern as the highest level in proestrus and the lowest level in diestrus II stage. While the serum LH levels were fluctuated from pregnant through involution stage, a sharp decline of mammary LH contents was observed in the lactating rats. This decrement was recovered in involuting rats to the level of proestrus stage. Reverse transcription-polymerase chain reaction (RT-PCR) and Southern blot analyses demonstrated that the transcriptional activities of the mammary LH and GnRH were increased from diestrus I stage to estrus stage, and the increased levels were maintained in pregnant, lactation and involution stages. To test the hypothesis that the alteration in mammary LH expression might be steroid-dependant, ovariectomy(OVX) and steroid supplement model was employed. As expected, supplement of estradiol(E$_2$) after OVX remarkably decreased serum LH level compared to that in serum from vehicle-only treated rats. Likewise, administration of E$_2$ significantly reduced the mammary LH content. The present study demonstrated that (i) the LH expression in mammary gland could be altered by some physiological parameters such as estrous cycle, pregnancy, lactation and involution, and (ii) ovarian steroid especially estrogen seems to be one of major endocrine factors which are responsible for regulation of mammary LH expression.

• Archives of design research
• /
• v.11 no.1
• /
• pp.291-302
• /
• 1998

This paper covers the development process of multimedia evaluation system, especially focused on customer satisfactory factors while customers navigating net-based Interactive multimedia system. Customers usually experience new level of interaction cased by newly developed web-based technology In ordinary multimedia system. However, if it gives customers satisfactory experience is a matter of question. To find out the relationship between customer satisfaction and interactivity factors exposed by multimedia system, a model has been developed which describes the structure of web-based multimedia system and its relation to customer satisfactory factors. Five different experiments, including 'semantic differential', 'focus group interview', and 'expert review', has been conducted and four customer satisfactory factors were identified. Those are 'customery value', 'structural perfectness', 'visual perfectness', and 'contemporaneity'. With these factors and newly delveoped evaluation system, 7 different web-site has been evaluated and analyzed at the end of this report.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.10-18
• /
• 2018

The primary purposes of this study are to understand a fundamental aspect of current uniformity around a reinforcing bar (rebar) in cement mortar, and to develop an accurate monitoring method in a wet-dry cycling process with the alternative current (AC) impedance method. Three cement mortar specimens with two embedded rebars were prepared in the laboratory. As a main variable, the distance between two rebars was designed to be 10, 20 and 30 mm with the same thickness of 20 mm. To simulate the corrosion of rebars in concrete structures in a marine environment, three cement mortar specimens were exposed to 15 wet-drying cycles (24-hour-immersion in seawater and 48-hour-drying in a room temperature) in the laboratory. It was observed that the potential level shifted to a noble value during corrosion potential monitoring, which is attributed to acceleration of dissolved oxygen diffusion at the drying process. AC impedance was measured in a frequency range from 100 kHz to 1 mHz on a wet-drying process. A theoretical model was proposed to explain the interface condition between the rebars and cement mortar by using the equivalent circuit consisting of a solution resistance, a charge transfer resistance and a CPE (constant phase element). It was observed that the diffusion impedance appeared in a low frequency range as corrosion of rebars progresses. At the drying stage of the wet-drying cycles, the currents line for monitoring tended to be non-uniform at the interface of rebar/mortar, being phase shift, ${\theta}$, close to $-45^{\circ}$.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1273-1279
• /
• 2016

Production of iodine-131 by neutron activation of tellurium in tellurium dioxide ($TeO_2$) material requires a target that meets the safety requirements. In a radiopharmaceutical production unit, a new lid for a can was designed, which permits tight sealing of the target by using tungsten inert gaswelding. The leakage rate of all prepared targets was assessed using a helium mass spectrometer. The accepted leakage rate is ${\leq}10^{-4}mbr.L/s$, according to the approved safety report related to iodine-131 production in the TRIGA Mark II research reactor (TRIGA: Training, Research, Isotopes, General Atomics). To confirm the resistance of the new design to the irradiation conditions in the TRIGA Mark II research reactor's central thimble, a study of heat effect on the sealed targets for 7 hours in an oven was conducted and the leakage rates were evaluated. The results show that the tightness of the targets is ensured up to $600^{\circ}C$ with the appearance of deformations on lids beyond $450^{\circ}C$. The study of heat transfer through the target was conducted by adopting a one-dimensional approximation, under consideration of the three transfer modes-convection, conduction, and radiation. The quantities of heat generated by gamma and neutron heating were calculated by a validated computational model for the neutronic simulation of the TRIGA Mark II research reactor using the Monte Carlo N-Particle transport code. Using the heat transfer equations according to the three modes of heat transfer, the thermal study of I-131 production by irradiation of the target in the central thimble showed that the temperatures of materials do not exceed the corresponding melting points. To validate this new design, several targets have been irradiated in the central thimble according to a preplanned irradiation program, going from4 hours of irradiation at a power level of 0.5MWup to 35 hours (7 h/d for 5 days a week) at 1.5MW. The results showthat the irradiated targets are tight because no iodine-131 was released in the atmosphere of the reactor building and in the reactor cooling water of the primary circuit.