• 제목/요약/키워드: chute

검색결과 47건 처리시간 0.025초

DESIGN AND PERFORMANCE OF A PROTOTYPE MOTORISED MANGO HARVESTER

  • Muhammad Salih, H.J.;Muhamad Ruhni, C.
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
    • /
    • pp.744-751
    • /
    • 1993
  • A prototype motorised hand-held mango harvester was designed and fabricated at the faculty of Engineering , University of Agriculture Malaysia. The harvester is aimed at reducing the harvesting operation time, improving the working comfort during the operation and increasing the harvesting capacity. The mango harvester consists of gripping and detaching devices, a power transmission shaft with a 12 V battery operated motor and an aluminium pole together with a collecting chute. Preliminary observation on the harvester's performance showed significant and satisfactory results. It was found out that the magno harvester was capable of harvesting on an average six seconds for each fruit detachment. Further study is being conducted to improve the efficiency and capacity of the mango harvester.

  • PDF

승용차 에어백용 CHUTE 부품 및 금형 해석 (Analysis of Shute Part & Die Mold of Air Bag for Passenger Car)

  • 박광진;김기선;김유용;김송화
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2010년도 추계학술발표논문집 2부
    • /
    • pp.835-838
    • /
    • 2010
  • 자동차 승객 안전에 대한 요구가 점차 확대 되어감에 따라 전방 충격으로부터 승객의 상해를 감소시키기 위한 각종 승객 안전장치 중 하나로, 에어백 시스템은 정면충돌 시 승객 사망률을 약 30%정도 저감시킬수 있다. 에어백은 충돌 시 일정한 힘 이상을 받게 되면 작동하도록 설계하여야 한다. 본 논문은 CATIA를 이용하여 3차원 설계를 하였으며, 해석 프로그램을 이용하여 사출성형품의 구조해석 및 사출 해석을 하여 최적화 하였다.

  • PDF

배선용차단기의 소호구조에 의한 한류 특성 연구 (Investigation of Arc Breaking Characteristic for Arc Chamber in Molded Case Circuit Breakerg)

  • 김용기;송중천;유만종
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 B
    • /
    • pp.708-710
    • /
    • 2001
  • In this paper, back commutation phenomena for iron chute chamber in AC low testing. For this experimental we used high speed camera and carried out with same prospective currents up to 10kA RMS. Hybrid arc quenching chambers which are composed with iron plate and insulating materials tested for reducing back commutation phenomena in interrupting process. It is shows that hybrid chambers which are various narrow slot path width reduces back commutation. As a result, a new type arc quenching chamber is to force the arc rapidly into a narrow insulating slot with iron plate. By this means the arc is lengthened and squeezed between insulating walls. Using this model, the behavior of the arc squeezed in the hybrid chamber and characteristics of arc voltage are also investigated.

  • PDF

곡물선별기의 성능 향상을 위한 구조변경 (Structural Modification for the Performance Improvement of a Grain Sorting Machine)

  • 김성현;이규호;임형빈;정진태
    • 한국소음진동공학회논문집
    • /
    • 제18권2호
    • /
    • pp.208-214
    • /
    • 2008
  • This paper presents a structural modification for the performance improvement of a grain sorting machine. The grain sorting machine is used to sort abnormal grains from normal grains such as rice or wheat. Vibration is one of main causes to deteriorate the sorting performance of the machine. Based on the finite element analysis and the experimental modal testing, the vibration characteristics were investigated for the sorting machine. Furthermore, in order to improve the sorting performance of the machine, the frame, chute and base plate of the sorting machine were modified by using the results of the vibration analysis.

대용량(50kA)의 Making Switch와 Back Up Breaker 접점 개발에 따른 검증시험의 연구 (The Study of the Verification Test for Development of Contacts(50kA) of Making Switch and Back Up Breaker)

  • 김선구;김원만;나대열;노창일;이동준;정흥수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 B
    • /
    • pp.842-844
    • /
    • 2004
  • The Back Up Breaker and Making Switch are very important equipments for the short circuit test facility, and contacts are the most important parts of the above switches. There are very many kind of contacts according to switches characteristic and should be done the verification test before use, especially development contacts. This study describes the class of switches, arc chute, material of whole contacts and essential test for verification. The essential test for verification are dielectric test, mechanical operation test, short-time withstand current test, load current breaking test, and short-circuit making current test etc.

  • PDF

피난기구 사용시간 실험분석을 통한 안전체험교육 개선방안 (Plans to Improve Safety Experience Education through the Experimental Analysis of Evacuation Equipment)

  • 이정일;이성은
    • 한국화재소방학회논문지
    • /
    • 제33권6호
    • /
    • pp.35-42
    • /
    • 2019
  • 본 논문은 피난기구의 사용시간 실험분석을 통한 안전체험교육 개선에 관한 방향을 알아보기 위해 진행되었다. 연구를 위해 피 실험자들을 체격과 체중이 비슷한 그룹으로 나누어 구성하였고, 4가지 피난기구를 직접 체험하게 함으로서 체험시간을 측정하여 분석하였다. 피난기구 설치에서부터 탈출까지의 전체시간 분석에서 완강기-경사식구조대-수직구조대-공기안전매트 순으로 탈출시간이 소요되었다. 피난기구의 탈출시간만 분석했을 경우에는 공기안전매트-경사식구조대-완강기-수직구조대 순으로 탈출시간이 분석되었다. 완강기의 1차 2차 실험에서 나타난 것처럼 1차 시간은 경험 후에 2차 시도에서 시간이 줄어들었다. 이처럼 체험을 통한 교육은 행동의 자신감 증가와 시간의 관리가 가능한 것으로 나타났다. 본 연구의 결론으로 안전교육의 목표는 인명과 재산피해의 최소화이고, 이를 위한 노력으로 많은 사람들에게 교육을 통해 최소화 하는 방법과 자신의 안전을 지키는 교육을 진행한다. 그러므로 더 많은 사람들에게 이러한 효과를 가져 오기 위해서는 체험교육을 통해 학습효과를 높이고, 자기안전을 지키게 하는 노력이 필요하다.

수리모형실험과 수치모의를 이용한 비상여수로 설계-임하댐 (Design of Emergency Spillway Using Hydraulic and Numerical Model - ImHa Multipurpose Dam)

  • 전태명;김형일;박형섭;백운일
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2006년도 학술발표회 논문집
    • /
    • pp.1726-1731
    • /
    • 2006
  • 본 연구에서는 임하다목적댐의 비상여수로 설계를 위하여 수리모형실험과 수치모형실험을 수행하였다. 수치모의에는 3차원 수치모형인 FLOW-3D를 사용하였다. 비상여수로 설계를 위하여 접근수로부, 월류웨어부, 천이부 및 도류부, 그리고 감세부로 나누어 수리모형실험과 수치모형실험의 수리현상 결과를 비교하였다. 최적의 비상여수로 설계를 위하여 기본계획안에 대하여 모의하고 이에 대한 보완점과 문제점들을 찾아내고 해결책을 제시하였다. 수치모의를 통하여 수리모형실험에서 쉽게 수행하기 어려운 다양한 조건을 모의하고 최적의 결과에 찾아 이를 수리모형실험으로 검증함으로써 비상여수로 기본설계안을 도출하였다.

  • PDF

축소부를 고려한 여수로의 충격파 저감 : 수치모의 (A Numerical Experiment For Interference Waves Reduction In Chute Spillways With Contraction)

  • 황종훈;김대근;김창시;이지원
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2006년도 학술발표회 논문집
    • /
    • pp.1732-1736
    • /
    • 2006
  • 여수로는 월류시 한계류 상태와 고유속의 사류상태가 복합적으로 일어나는 복잡한 흐름형태를 가지고 있어 여수로의 단면설계시 수리적인면뿐만 아니라 구조적인 측면에서도 안정해야 하며 경제성이 고려되어야 한다. 그래서 고유속의 흐름을 갖는 여수로에 축소부를 고려할 경우 충격파에 의한 수위상승과 하류의 흐름 교란 등 수리학적인 불안정이 발생하기 때문에 설계시 경제적인 장점이 있음에도 불구하고 단면축소부를 고려하여 여수로를 설계하는 것은 현실적으로 많은 어려움이 있다. 본 연구에서는 단면축소를 고려한 여수로 설계를 위하여 3차원 수치모형인 Flow-3D를 이용하여 충격파로 인하여 발생하는 교차파 저감을 모의하기 위하여 수치실험을 실시하였다. 교차파 저감을 위해 축소부내에서 교차파가 발생하도록 축소부의 각도는 유입흐름 특성을 고려하여 적정하게 설정하였다. 수치실험결과 축소부의 각도가 작을수록 첫번째 교차파의 수위는 크게 발생하지 않으나 단면축소후 교차파가 하류로 전파되어 불안정한 흐름이 연속적으로 발생하고, 과대하게 설정할 경우 첫번째 발생하는 교차파에 의해 중앙부의 수위가 크게 상승하는 결과를 보였다. 또한 본 연구에서는 축소부단면내 회절판(diffractor) 설치전 후의 수리학적 거동을 모의하여 회절판의 흐름개선 효과를 검증하였다.

  • PDF

유한요소법에 의한 2차원 하천 흐름 모형의 개발 (Two-Dimensional River Flow Analysis Modeling By Finite Element Method)

  • 한건연;김상호;김병현;최승용
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2006년도 학술발표회 논문집
    • /
    • pp.425-429
    • /
    • 2006
  • The understanding and prediction of the behavior of flow in open channels are important to the solution of a wide variety of practical flow problems in water resources engineering. Recently, frequent drought has increased the necessity of an effective water resources control and management of river flows for reserving instream flow. The objective of this study is to develop an efficient and accurate finite element model based on Streamline Upwind/Petrov-Galerkin(SU/PG) scheme for analyzing and predicting two dimensional flow features in complex natural rivers. Several tests were performed in developed all elements(4-Node, 6-Node, 8-Node elements) for the purpose of validation and verification of the developed model. The U-shaped channel of flow and natural river of flow were performed for tests. The results were compared with these of laboratory experiments and RMA-2 model. Such results showed that solutions of high order elements were better accurate and improved than those of linear elements. Also, the suggested model displayed reasonable velocity distribution compare to RMA-2 model in meandering domain for application of natural river flow. Accordingly, the developed finite element model is feasible and produces reliable results for simulation of two dimensional natural river flow. Also, One contribution of this study is to present that results can lead to significant gain in analyzing the accurate flow behavior associated with hydraulic structure such as weir and water intake station and flow of chute and pool.

  • PDF

소규모 농업용 저수지의 노후도 및 안전도 평가 -고삼 저수지에 대한 사례 연구- (Evaluation of Degradation and Safety of Small Agricultural Reservoir)

  • 장병옥;박영곤;우철웅
    • 한국농공학회지
    • /
    • 제40권1호
    • /
    • pp.49-56
    • /
    • 1998
  • Ths study was peformed to evaluate the degree of degradation and safety of a small agricultural reservoir, Kosam Reservoir, in Kyungki Province. Evaluation was done by the program developed by the authors. Results of the study are as follows: 1) Although many burrows were found in downstream side of embankment and cracks were found in wall joining spillway, it appeared that degree of degradation of embankment was in good conditions. 2) Compressive strengths of concrete of crest, side channel, chute floor of spillway were in poor condition. But it appeared that overall degree of degradation of structures was in medium condition based on the criteria of the evaluation system 3) From the analysis of slope stability, safety factor of downstream slope was over 3.3 for the worst condition, such as flood and high water level and that of upstream slope was also over 3.6 for rapid drawdown. In case of earthquake, safety factors were over 2.5 for all conditions. Therefore embankment slopes of Kosam Reservoir were very stable for normal and earthquake condition. 4) As upon assumed failure of embankment of Kosam Reservoir, degree of damage was estimated to be very serious because of many loss of life and properties in the downstream area. 5) Overall grade of safety of Kosam Reservoir was in good condition. Therefore safety was considered to be "No problems" at the present time but further degradation may be proceeded partly and continuously as time goes by.e goes by.

  • PDF