• 대한화학회지
• /
• 제36권1호
• /
• pp.3-15
• /
• 1992

크롬이움, 몰리브덴늄, 텅그스텐의 carbene 착물인 $(CO)_5Cr=CCHCH_2(XCH_3)\;,\;(CO)_5Mo=CCHCH_2(XCH_3)\;,\;(CO)_5W=CCHCH_2(XCH_3)$에 대해서 확장된 Huckel 방법으로 계산하여 이들의 전자구조와 반응성 등을 고찰하였다. fragment들의 궤도함수 상관도로부터 M=Ccarb 이중결합의 특성을 알 수 있다. M=Ccarb 이중결합의 ${\sigma}$결합은 carbene의 HOMO로부터 $(CO)_5M$의 LUMO로 전자가 이동하므로 형성되고 ${\pi}$결합은 전이금속의 축퇴된 d${\pi}$ 궤도함수로부터 carbene의 LUMO로 전자가 역이동하므로서 형성된다. M=Ccarb 결합에서 전하분극은 Mo, W-착물에 대해서 M쪽이 더욱 양으로 계산되었다. 화학적 또는 물리적 성질은 carbene 탄소원자의 양전하에 의하여 결정되며 carbene 탄소원자의 친전자적 반응성은 전하에 의해서가 아니라 frontier orbital의 LUMO에 의해서 지배받는다.

• 한국토양비료학회지
• /
• 제46권3호
• /
• pp.193-202
• /
• 2013

The concentrations of heavy metals such as cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), zinc (Zn), nickel (Ni), and arsenic (As) in sand samples collected from selected children's playground and their correlation with environmental parameters, such as concentration of particulate matter in the atmosphere ($PM_{10}$), apartment age (> 5 years), clay and organic matter contents in sand samples, were analyzed. The average heavy metal concentration in samples was 0.040 mg $kg^{-1}$ for Cd, 0.200 mg $kg^{-1}$ for Cr, 1.75 mg $kg^{-1}$ for Cu, 15.1 mg $kg^{-1}$ for Ni, 3.42 mg $kg^{-1}$ for Pb, 66.7 mg $kg^{-1}$ for Zn and 0.750 mg $kg^{-1}$ for As, all of which were below the environmental regulatory level established by Korea Ministry of Environment. However, in the consideration of direct and oral exposure by children to playground sand, the risk of the concentration range in the samples might be greatly enhanced. Heavy metal concentration in samples collected from high $PM_{10}$ (> $70{\mu}gm^{-3}$) area was slightly greater than in samples from low $PM_{10}$ (< $70{\mu}gm^{-3}$), indicating the contribution of particulate matter in air phase to heavy metal concentration in playground sand samples. The concentrations of both Cd and Pb were the highest in apartments older than 21 years (0.050 mg $kg^{-1}$ and 5.28 mg $kg^{-1}$ for Cd and Pb respectively) and showed positive correlation with apartment age (p<0.01 and p<0.001 for Cd and Pb, respectively). Clay content in playground sands ranged 3.8~11.2% and was positively correlated with heavy metal concentration. Organic matter content was negligible (mostly < 0.1%) and showed poor correlation with heavy metal concentration. In conclusion, concentration of heavy metals in playground sand was found to be predominantly influenced by the apartment age and clay content in sand samples and supplemented by dust deposition of particulate matter ($PM_{10}$) from atmosphere.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.258-292
• /
• 1996

In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.

• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.312-316
• /
• 2015

PURPOSE. This study aimed to present the clinical applicability of restorations fabricated by a new method, by comparing the bond strength of between ceramic powder with different coefficient of thermal expansion and alloys fabricated by Selective laser sintering (SLS). MATERIALS AND METHODS. Fifty Co-Cr alloy specimens ($25.0{\times}3.0{\times}0.5mm$) were prepared by SLS and fired with the ceramic ($8.0{\times}3.0{\times}0.5mm$) (ISO 9693:1999). For comparison, ceramics with different coefficient of thermal expansion were used. The bond strength was measured by three-point bending testing and surfaces were observed with FE-SEM. Results were analyzed with a one-way ANOVA (${\alpha}$=.05). RESULTS. The mean values of Duceram Kiss ($61.18{\pm}6.86MPa$), Vita VM13 ($60.30{\pm}7.14MPa$), Ceramco 3 ($58.87{\pm}5.33MPa$), Noritake EX-3 ($55.86{\pm}7.53MPa$), and Vintage MP ($55.15{\pm}7.53MPa$) were found. No significant difference was observed between the bond strengths of the various metal-ceramics. The surfaces of the specimens possessed minute gaps between the additive manufactured layers. CONCLUSION. All the five powders have bond strengths higher than the required 25 MPa minimum (ISO 9693); therefore, various powders can be applied to metal structures fabricated by SLS.

• 박물관보존과학
• /
• 제29권
• /
• pp.133-152
• /
• 2023

야외에 위치한 대형 군사문화유산의 장기적 보존을 위해 선행연구를 참고하여 과거에 이루어진 도료를 통한 도장 기술의 역사를 살펴보았으며, 전쟁기념관 소장 H-13 헬기의 분석 결과와 비교하였다. 선행연구에서 제2차 세계대전에 참여하여 지상에서 발굴된 난파기 3점에서 샘플을 수집해 분석한 결과, 항공기의 각 샘플에서 크롬의 다양한 화학적인 상태의 특성이 보호 코팅에 대한 역할 수행을 확인할 수 있었다. 약 80년이 지나 도료층의 변질과 자연환경에 장기간 노출되었는데도, 이 화합물은 1940년도 초에 부식 억제 안료로서 테스트 되었으며, 수분에 저항력을 갖는 훌륭한 억제력을 제공했다. 이런 이유로 항공 산업에서 알루미늄 합금의 부식 억제제로 널리 사용되었다. 즉 부식을 방지하기 위해 가장 널리 사용되는 재료는 크롬산염을 함유한 유기 프라이머였다. 본 연구에서 6·25전쟁에 운용되었던 H-13 헬기의 도료분석을 토대로 두 번째 층인 프라이머가 산화크롬(Cr₂O₃)을 포함하고 있음을 보여준다. 또한 적색의 사산화삼납(Pb₃O₄)을 전색제에 녹여 사용한 것으로 추정된다. 이를 선행연구와 비교한 결과 크롬산염이 제공하는 부식 방지 기능이 여전히 유효한지 여부를 명확히하는 데 도움이 될 수 있다. 적외선 분광분석 결과는 알키드 수지(Alkyd Resin)의 도료가 사용되었다. 향후 보다 다양한 유물과의 비교를 통해 합금을 부식으로부터 보호하기 위한 도료의 제작 기술 변화를 해석할 수 있을 것으로 기대된다.

• 유기물자원화
• /
• 제14권3호
• /
• pp.77-84
• /
• 2006

본 연구는 마이크로파 최적 조건에서 하수슬러지 케이크를 마이크로파로 건조하여 재활용하는 방안을 제시하는데 목적이 있다. 연구에 사용된 하수슬러지 케이크는 P시 S, N하수처리장의 탈수슬러지 케이크를 사용하였으며, 마이크로파는 주파수 2450MHz에 1~4kW의 전력을 사용하였다. 마이크로파의 가열이 유전 가열방식이고, 내부수 용출 등으로 초기수분이 77%의 고함수율이라도 짧은 시간 안에 수분이 0.2%까지 감소하여 진다. 이런 결과로 마이크로파 처리한 하수 슬러지 케이크의 복토제로서의 활용은 흙과 혼합하여 매립할 경우 중간, 최종 복토제나 객토용으로 적용이 가능할 것으로 판단된다. 또한 중금속 흡착제로의 활용은 저 농도 중금속 흡착제로 사용되어지는 황토와의 비교 실험에서 Cu, Pb, Cd,의 농도가 30분 이내에 검출되지 않는 수준으로 나타났으며, Cr은 약 $0.2mg/{\ell}$정도 검출되어 흡착제로서의 가능성을 확인 할 수 있다. 그러므로 경제성이나 친환경적인 면에서 하수슬러지 케이크 건조에 마이크로파 처리를 하는 것이 적당하다고 판단되어지고, 재활용 면에서도 고비용의 황토를 대체하는 물질로 사용이 가능하여 경제적이라고 판단되어 진다.

• 전기화학회지
• /
• 제9권2호
• /
• pp.70-76
• /
• 2006

마이크로 전기화학 실험법인 비접촉식 미세방울셀이 산 용액에 노출된 저 크롬이 함유된 스테인리스강(STS 316)과 같이 젖음성이 높은 전기화학계에 사용되는데 어려움이 있었다. 음압의 인가, 방울의 크기 제어 그리고 소수성의 개스킷의 사용은 높은 젖음성을 지닌 표면에서 비접촉식 미세방울셀의 적용을 가능하게 하였다. 개선된 미세방울셀의 신뢰성을 확인하고자 3종류의 다른 계-산성염화용액과 고 크롬 페라이트 스테인리스강, 산성염화용액과 STS 316 그리고 중성염화용액과 STS 316-에 대하여 개선된 미세방울셀로 국부부식 연구를 수행하였다. 첫째 산성용액에서 고 크롬강의 양극 분극 결과는 $\alpha/\sigma$ 계면 근처에서 국부부식이 크롬 고갈층에 의한 것임을 보여주었다. 둘째 산성용액에서 STS316의 양극 분극실험이 개선된 미세방울셀에서 성공적으로 수행됨을 확인할 수 있었다. 특히, 미세방울셀에서 얻어진 국부 양극 분극곡선을 통해 STS316의 내식성에 미치는 $\delta$-라이트 영향을 밝힐 수 있었다. 마지막으로 중성염화 용액에서 STS316의 양극 분극곡선은 핏팅 저항성이 $\delta$-페라이트보다 개재물에 의존됨을 보여주었다.

• The Journal of Advanced Prosthodontics
• /
• 제4권2호
• /
• pp.89-92
• /
• 2012

PURPOSE. Adequate passive-fitting of one-piece cast 3-element implant-supported frameworks is hard to achieve. This short communication aims to present an alternative method for section of one-piece cast frameworks and for casting implant-supported frameworks. MATERIALS AND METHODS. Three-unit implant-supported nickel-chromium (Ni-Cr) frameworks were tested for vertical misfit (n = 6). The frameworks were cast as one-piece (Group A) and later transversally sectioned through a diagonal axis (Group B) and compared to frameworks that were cast diagonally separated (Group C). All separated frameworks were laser welded. Only one side of the frameworks was screwed. RESULTS. The results on the tightened side were significantly lower in Group C ($6.43{\pm}3.24{\mu}m$) when compared to Groups A ($16.50{\pm}7.55{\mu}m$) and B ($16.27{\pm}1.71{\mu}m$) ($P$ <.05). On the opposite side, the diagonal section of the one-piece castings for laser welding showed significant improvement in the levels of misfit of the frameworks (Group A, $58.66{\pm}14.30{\mu}m$; Group B, $39.48{\pm}12.03{\mu}m$; Group C, $23.13{\pm}8.24{\mu}m$) ($P$ <.05). CONCLUSION. Casting diagonally sectioned frameworks lowers the misfit levels. Lower misfit levels for the frameworks can be achieved by diagonally sectioning one-piece frameworks.

• 한국토양비료학회지
• /
• 제49권5호
• /
• pp.524-530
• /
• 2016

Agricultural soils near or around industrial complexes can contain a certain amount of heavy metals that readily enter the food chain and negatively affect human health. Therefore, we conducted the study to investigate the distribution of selected heavy metals, including arsenic (As), cadmium (Cd), chromium (Cr), nickel (Ni), lead (Pb), mercury (Hg), and zinc (Zn), in farm-land soils around fifteen industrial complexes in the southwestern provinces, Korea. The concentrations of heavy metals in the soil samples were determined by the pseudo-total aqua regia (3 HCl : $1HNO_3$) digestion procedure. The heavy metal concentrations in most soils examined did not exceed the levels of Soil Contamination Warning Standard (SCWS) for agricultural lands (Region 1) presented in Soil Environment Conservation Law (SECL) established by Ministry of Environment (MOE), Korea. However, only one sampling site showed higher As amount ($27.1mg\;kg^{-1}$) than the SCWS level of As ($25mg\;kg^{-1}$). Pollution index (PI) for heavy metals did not exceed 1.0. The PI values were significantly positively correlated (p < 0.01) with the heavy metal concentrations. In particular, the values of correlation coefficient between the Cd and Pb concentrations and the PI values were higher than those estimated from other combinations, and thus the amounts of Cd and Pb in the agricultural soils highly affected the PI values for the heavy metals.

• 한국유기농업학회지
• /
• 제7권1호
• /
• pp.147-159
• /
• 1998

목초액 처리구와 비처리구를 나누고 여기에 상치의 두 종류, 적축면과 청치마로써 유기질 비료와 화학비료의 성분에 따라 재배한 상치내의 미량 원소 함량에 관한 연구에서 얻은 결과는 다음과 같다. 1. 목초액 처리구와 비처리구에 있어서 상치내 미량 원소 함량을 큰 차이를 보이지 않았다. 2. 상치내 Cr, Ni, Pb, Al등의 함량은 유기질 비료와 무기질 비료의 함량에 의해서 크게 변하지는 않았다. 3. 상치내 Hg 함량이 모든 실험구에서 검출되지 않았다. 4. Cd의 상치내 함량은 유기질비료가 많으면 많을수록 줄어드는 것으로 나타났다.