• Title/Summary/Keyword: chromium ($Cr^{3+}$

Search Result 460, Processing Time 0.028 seconds

Spectroscopic Properties and Ligand Field Analysis of cis-Dinitrato(1,4,8,11-tetraazacyclotetradecane)chromium(III) Nitrate

  • 최종하
    • Bulletin of the Korean Chemical Society
    • /
    • v.18 no.8
    • /
    • pp.819-823
    • /
    • 1997
  • The luminescence and photoexcitation spectra of cis-[Cr(cyclam)(NO3)2]NO3·½ H2O (cyclam=1,4,8,11-tetraazacyclotetradecane) taken at 77 K are reported. The infrared and visible spectra at room-temperature are also measured. The vibrational intervals of the electronic ground state are extracted from the far-infrared and emission spectra. The ten electronic bands due to spin-allowed and spin-forbidden transitions are assigned. With observed transitions, a ligand field analysis has been performed to determine the bonding property of nitrate group in the chromium(Ⅲ) complex. According to the results, it is found that nitrate ligand has weak σ- and π-donor properties toward chromium(Ⅲ).

The Effect of Destabilization Heat Treatment on the Carbide and Matrix Microstructures of 3%C-18%Cr-1%Mo-2%Ni-1%Mn High Chromium Cast Iron (3%C-18%Cr-1%Mo-2%Ni-1%Mn 고크롬백주철의 탄화물 및 기지조직에 미치는 불안정화열처리의 영향)

  • Yu, Sung-Kon
    • Korean Journal of Materials Research
    • /
    • v.13 no.9
    • /
    • pp.581-586
    • /
    • 2003
  • 3%C-18%Cr-1%Mo-2%Ni-1%Mn high chromium cast iron was casted and destabilized at temperatures of 900, 1000 and $1100^{\circ}C$ for 1, 2, 4 and 8hr under $N_2$atmosphere to observe the effect of destabilization temperature and time on the carbide and matrix structures. In as-cast condition, the microstructure consisted of $M_{ 7}$$C_3$ carbides and matrix structures which were composed of 91.50% austenite and 8.50% martensite. Numerous fine secondary carbides were observed in the specimens destabilized at $900^{\circ}C$ for 1, 2, 4 and 8hr. But, the number of secondary carbides were much reduced with the increased destabilization temperature. More austenite was formed in the matrix with the higher destabilization temperature. The amounts of austenite in the matrix were 4.23% at $900^{\circ}C$, 29.68% at $1000^{\circ}C$ and 66.51% at$ 1100^{\circ}C$, respectively. However, the effect of destabilization time on the secondary carbide and matrix was very weak compared with that of destabilization temperature. The ranges of the amount of austenite in the matrix from 1hr to 8hr destabilization heat treatment were: 3.95%-4.35% at $900^{\circ}C$, 28.89%-30.15% at $1000^{\circ}C$ and 65.13%-67.12% at $1100^{\circ}C$, respectively. The variation ranges were very narrow. The equilibrium concentration of C and Cr in austenite was already reached within 1hr during destabilization heat treatment. After an attainment of the equilibrium concentration of C and Cr in austenite, no more secondary carbide was precipitated from the matrix.

Relationship between Workers′ Exposure to Airborne Chromium and Blood and Urine Chromium Levels in Plating Process (도금업체 근로자의 공기중 크롬 노출 농도와 요 및 혈중 크롬 농도간의 상관성)

  • 이지태;신용철
    • Journal of Environmental Health Sciences
    • /
    • v.27 no.3
    • /
    • pp.1-10
    • /
    • 2001
  • This study was performed to evaluate chromium in air and chromium concentrations in whole blood and urine of workers at chrome plating factories, and to determine the correlation between environmental and biological chromium levels. This study involved 29 workers as study group and 24 undergraduate students as control group. The geometric means(GM) of airborne hexavalent chromium and total chromium concentrations in the plating factories were 3.4 $\mu\textrm{g}$/㎥ and 10.8 $\mu\textrm{g}$/㎥, respectively. Hexavalent chromium levels in two of total 29 measurements exceeded the korean occupational exposure limit and the American Conference of Governmental Industrial Hygienists Threshold Limit Value(ACGIH-TLV) of 50$\mu\textrm{g}$/㎥. Only one sample for total chromium exceeded the Korea occupational exposure limits, the ACGIH-TLV, and the National Institute for Occupational Safety and Health Recommended Exposure Limits(NIOSH-REL) of 500 $\mu\textrm{g}$/㎥. The GM of chromium concentrations in blood and urine of workers exposed to chromium were 8.4 $\mu\textrm{g}$/L and 11.9 $\mu\textrm{g}$/L. The GM of chromium concentrations in blood and urine of workers exposed to chromium were 8.4 $\mu\textrm{g}$/L and 11.9 $\mu\textrm{g}$/L, respectively, whereas the chromium concentrations in blood and urine of the controls were 1.6 $\mu\textrm{g}$/L and 3.8 $\mu\textrm{g}$/L, respectively. There were statistically significant differences of blood and urine concentrations between study group and control group (p<0.01). The chromium concentrations in urine were most highly related to hexavalent chromium, concentration in air(r=0.642, p<0.01). Also, there was a relatively high correlation between the hexavalent chromium concentrations in air and chromium concentrations in whole blood(r=0.557, p<0.05). These results indicate that whole-blood chromium with urinary chromium could be an indicator of chromium body burden caused by exposure to chromic acid mist in plating operation.

  • PDF

Study of Chromium thin films deposited by DC magnetron sputtering under glancing angle deposition at low working pressure

  • Bae, Kwang-Jin;Ju, Jae-Hoon;Cho, Young-Rae
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2015.08a
    • /
    • pp.181.2-181.2
    • /
    • 2015
  • Sputtering is one of the most popular physical deposition methods due to their versatility and reproducibility. Synthesis of Cr thin films by DC magnetron sputtering using glancing angle deposition (GLAD) has been reported. Chromium thin films have been prepared at two different working pressure($2.0{\times}10-2$, 30, $3.3{\times}10-3torr$) on Si-wafer substrate using magnetron sputtering with glancing angle deposition (GLAD) technique. The thickness of Cr thin films on the substrate was adjusted about 1 mm. The electrical property was measured by four-point probe method. For the measurement of density in the films, an X-ray reflectivity (XRR) was carried out. The sheet resistance and column angle increased with the increase of glancing angle. However, nanohardness and density of Cr thin films decreased as the glancing angle increased. The measured density for the Cr thin films decreased from 6.1 to 3.8 g/cc as the glancing angle increased from $0^{\circ}$ to $90^{\circ}$ degree. The low density of Cr thin films is resulted from the isolated columnar structure of samples. The evolution of the isolated columnar structure was enhanced at the conditions of low sputter pressure and high glancing angle. This GLAD technique can be potentially applied to the synthesis of thin films requiring porous and uniform coating such as thin film catalysts or gas sensors.

  • PDF

Growth of Phaseolus mungo under chromium stress - influence of chromate reducing bacteria

  • M. Rajkumar;Na, R.gendran;Lee, Kui-Jae;Lee, Wang-Hyu
    • Proceedings of the Korean Society of Plant Pathology Conference
    • /
    • 2003.10a
    • /
    • pp.105.1-105
    • /
    • 2003
  • The Plant growth Promoting rhizobacteria (PGPR), Pseudomonas sp. (A3) and Bacillus sp. (AT33) were isolated from the rhizosphere of Amaranthus blitum collected from soil contaminated with chromium. Both bacterial strains quantitatively reduced hexavalent chromium to trivalent chromium. Pseudomonas sp. broughter greater conversion of Cr6+ in the medium (100%) as compared to Bacillus sp.(62%). Phaseolus mungo seeds inoculated with Pseudomonas sp. or Bacillus sp. were grown under different concentration of chromium. The monitored parameters included elongation of shoot and root, fresh weight, dry weight and concentration of chromium in the shoot and root systems. As compared to non inoculated seedlings those inoculated with A3 and AT33 exhibited better growth.

  • PDF

Growth of Phaseolus mungounder chromium stress - influence of chromate reducing bacteria

  • M. Rajkumar;Lee, Kui-Jae;Seo, Jae-Hwan;Lee, Wang-Hui
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2003.10b
    • /
    • pp.57-57
    • /
    • 2003
  • The plant growth promoting rhizobacteria (PGPR), Pseudomonas sp. (A3) and Bacillus sp. (AT33) were isolated from the rhizosphere of Amaranthus blitum collected from soil contaminated with chromium. Bothbacterial strains quantitatively reduced hexavalent chromium to trivalent chromium. Pseudomonas sp. broughter greater conversion of Cr6+ in the medium (100%) as compared to Bacillus sp.(62%). Phaseolus mungo seeds inoculated with Pseudomonas sp. or Bacillus sp. were grown under different concentration of chromium. The monitoredparameters included elongation of shoot and root, fresh weight, dry weight and concentration of chromium in the shoot and root systems. As compared to non inoculated seedlings those inoculated with A3 and AT33 exhibited better growth.

  • PDF

γ-Aminobutyric acid (GABA) confers chromium stress tolerance in mustard (Brassica juncea L.) seedlings by modulating the antioxidant defense and glyoxalase systems

  • Al Mahmud, Jubayer;Hasanuzzaman, Mirza;Nahar, Kamrun;Rahman, Anisur;Hossain, Md. Shahadat;Fujita, Masayuki
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.235-235
    • /
    • 2017
  • Chromium (Cr) toxicity is hazardous to the seed germination, growth, and development of plants. ${\gamma}$-Aminobutyric acid (GABA) is a non-protein amino acid and is involved in stress tolerance in plants. To investigate the effects of GABA in alleviating Cr toxicity, we treated eight-d-old mustard (Brassica juncea L.) seedlings with Cr (0.15 mM and 0.3 mM $K_2CrO_4$, 5 days) alone and in combination with GABA ($125{\mu}M$) in a semi-hydroponic medium. The roots and shoots of the seedlings accumulated Cr in a dose-dependent manner, which led to an increase in oxidative damage [lipid peroxidation; hydrogen peroxide ($H_2O_2$) content; superoxide ($O{_2}^{{\cdot}-}$) generation; lipoxygenase (LOX) activity], MG content, and disrupted antioxidant defense and glyoxalase systems. Chromium stress also reduced growth, leaf relative water content (RWC), and chlorophyll (chl) content but increased phytochelatin (PC) and proline (Pro) content. Furthermore, supplementing the Cr-treated seedlings with GABA reduced Cr uptake and upregulated the non-enzymatic antioxidants (ascorbate, AsA; glutathione, GSH) and the activities of the enzymatic antioxidants including ascorbate peroxidase (APX), monodehydroascorbate reductase (MDHAR), dehydroascorbate reductase (DHAR), glutathione reductase (GR), glutathione peroxidase (GPX), superoxide dismutase (SOD), catalase (CAT), glyoxalase I (Gly I), and glyoxalase II (Gly II), and finally reduced oxidative damage. Adding GABA also increased leaf RWC and chl content, decreased Pro and PC content, and restored plant growth. These findings shed light on the effect of GABA in improving the physiological mechanisms of mustard seedlings in response to Cr stress.

  • PDF

Effects of the Combination of Glucose, Chromium Picolinate, and Vitamin C on Lipid Metabolism in Steers

  • Lee, Hong-Gu;Yin, Jin-Long;Xu, Cheng-Xiong;Hong, Zhong-Shan;Lee, Zhe-Hu;Jin, Yong-Cheng;Choi, Chang-Weon;Lee, Do-Hyeung;Kim, Kyoung-Hoon;Choi, Yun-Jaie
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.24 no.12
    • /
    • pp.1674-1680
    • /
    • 2011
  • This study was conducted to examine the effects of glucose, chromium picolinate (CrP), and vitamin C (Vit C) on lipid metabolism in Korean native steers fitted with indwelling catheters. A total of 12 Korean native steers were randomly allocated to the following treatments: 1) normal control diet, 2) same as 1) +250 g of glucose by intravenous (IV) infusion, 3) same as 2)+13.5 g CrP administered orally, and 4) same as 3)+2.52 g Vit C by IV infusion. Glucose, Vit C, and CrP treatments were administered for five days. At days 1 and 3, serum insulin was higher in treated animals than in those fed the control diet (p<0.05). Serum non-esterified fatty acid (NEFA) concentration in the steers on treatment 2), control+13.5 g CrP, was lower than those on other treatments at 90 min post-infusion on days 1 and 3 (p<0.05). The expression of peroxisome proliferator-activated receptor-${\gamma}$ (PPAR${\gamma}$)2, stearoyl-CoA desaturase-1 (SCD), fatty acid synthase (FAS), and glucose transporter type 4 (Glut 4) in the longissimus muscle of steers on treatment 2 was higher than those on other treatments. In conclusion, the results suggest that CrP is associated with the regulation of gene expression involved in adipogenesis.

Influence of Mo and Cr Contents on Hardenability of Low-Carbon Boron Steels (저탄소 보론강의 경화능에 미치는 Mo 및 Cr 함량의 영향)

  • Hwang, Byoungchul;Suh, Dong-Woo
    • Korean Journal of Materials Research
    • /
    • v.23 no.10
    • /
    • pp.555-561
    • /
    • 2013
  • The hardenability of low-carbon boron steels with different molybdenum and chromium contents was investigated using dilatometry, microstructural observations and secondary ion mass spectroscopy (SIMS), and then discussed in terms of the segregation and precipitation behaviors of boron. The hardenability was quantitatively evaluated by a critical cooling rate obtained from the hardness distribution plotted as a function of cooling rate. It was found that the molybdenum addition was more effective than the chromium addition to increase the hardenability of boron steels, in contrast to boron-free steels. The addition of 0.2 wt.% molybdenum completely suppressed the formation of eutectoid ferrite, even at the slow cooling rate of $0.2^{\circ}C/s$, while the addition of 0.5 wt.% chromium did this at cooling rates above $3^{\circ}C/s$. The SIMS analysis results to observe the boron distribution at the austenite grain boundaries confirmed that the addition of 0.2 wt.% molybdenum effectively increased the hardenability of boron steels, as the boron atoms were significantly segregated to the austenite grain boundaries without the precipitation of borocarbide, thus retarding the austenite-to-ferrite transformation compared to the addition of 0.5 wt.% chromium. On the other hand, the synergistic effect of molybdenum and boron on the hardenability of boron steels could be explained from thermodynamic and kinetic perspectives.

Effect of Thermal History on Pitting Corrosion of High Nitrogen and Low Molybdenum Stainless Steels

  • Kim, Kwangsik;Chang, Hyunyoung;Kim, Youngsik
    • Corrosion Science and Technology
    • /
    • v.2 no.2
    • /
    • pp.75-81
    • /
    • 2003
  • Chromium, molybdenum. and nitrogen are very important alloying elements in stainless steels and its effect was approved in pitting resistance equivalent (PRE) equations and many experimental results. However, Cr can improve the corrosion resistance, but facilitate the formation of sigma phase. Also. Mo has the same effect in stainless steels. If Cr and Mo are added at high amount to increase the corrosion resistance of stainless steel, corrosion resistance in annealed alloys can be improved, but in case of welding or aging heat treatment. its resistance will be drastically decreased. In this work, increasing Cr and N contents but decreasing Mo than the commercial alloys made the experimental alloys. Typical alloys are 25Cr-4.5Mo-0.43N alloy, 27Cr-4.7Mo-0.4N alloy, 27Cr-5.3Mo-0.25N alloy, 32Cr-2.6Mo-0.36N alloy. After annealing and aging heat treatment, microstructures, anodic polarization test, and pitting corrosion test were performed. Annealed alloys showed $100^{\circ}C$ of CPT and aged alloys showed the different tendency depending upon Cr and Mo contents(SFI)