• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1507-1509
• /
• 2005

LCD(Liquid Crystal Display) products is needed to have high reliability and are produced without harmful material. Because Substitution for CCFL of Light source used to Conventional backlight unit, research is going about product with LED of light source at present. In this experiment, We made the LED backlight unit with high quality for automotivenavigation. This backlight unit has center luminance of 6500 nit at15W power consumption. We adjusted chromaticity by using ten Blue LED and eight side emitting type White LEDs with high power LED from Lumileds company.

• Transactions on Electrical and Electronic Materials
• /
• 제9권6호
• /
• pp.251-254
• /
• 2008

Blue-white reflective cholesteric liquid crystal display was prepared by a unique method of single liquid crystal layer, the combination of yellow color liquid crystal and blue color backplane. The dopant and host combination of chlolesteric liquid crystal affects the color spectrum. The CIE chromaticity coordinates of blue and white are (0.10, 0.16) and (0.29, 0.30), respectively. The relatively low driving voltages of 32 V for blue-white display are obtained.

• Journal of Biosystems Engineering
• /
• 제17권4호
• /
• pp.382-395
• /
• 1992

The surface color of several varieties of apples were expressed quantitatively in xyz chromaticity coordinates. The spectral reflectance of 'Fuji' apples were measured in 400-820 nm range by using a spectrophotometer. Based on the spectrophotometer data and the result of visual sensory test, linear regression models were developed to select wavelengths effective for sorting apples. The models utilized reflectance at single wavelength, and the difference and ratio of the reflectance at two distinct wavelengths. The model which best fitted the visual sensory test data was one utilizing the ratio of the reflectance at 618 nm and 514nm. The correlation coefficient for this model was 0.967. Several other models were also described.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1433-1436
• /
• 2007

Using a blue emitting DPVBi material and red dopant DCJTB, WOLEDs with and without green emitter C6 added in ETL or HTL have been fabricated. The chromaticity color index of WOLEDs without C6 depends strongly on the doping concentration. In addition, manipulating thickness of emitting layer is similar effect such as controlling weight concentration of dopant. While the white color of WOLEDs with C6 added in ETL or HTL depend on position of C6. WOLED of three colors added green dye have been shown turn-on voltage of 3.25V, and EL efficiency 3.05cd/A @9V, $8102\;cd/m^2$, CIE coordinates (0.30, 0.32).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.250.2-250.2
• /
• 2014

Currently, teeth whitening method which is applicable to dental surgery is that physician expertises give medical treatment to teeth directly dealed with a high concentration of hydrogen peroxide and carbamide peroxide. If hydrogen peroxide concentration is too high for treatment of maximized teeth whitening effect [1], it is harmful to the human body [2]. To the maximum effective and no harmful teeth whitening effect in a short period of time at home, we have observed the whitening effect using carbamide peroxide (15%) and a low-temperature atmospheric pressure plasma jet which is regulated by the Food and Drug Administration. The gas supplied conditions of the non-thermal atmospheric pressure plasma jet was with the humidified (0.6%) gas in nitrogen or air at gas flow rate of 1000 sccm. Also, the measurement of chemical species from the jet was carried out using the optical emission spectroscopy (OES), the evidence of increased reactive oxygen species compared to non-humidified plasma jet. We have found that the whitening effect of the plasma is very excellent through this experiment, when bovine teeth are treated in carbamide peroxide (15%) and water vapor (0.2 to 1%). The brightness of whitening teeth was increased up to 2 times longer in the CIE chromaticity coordinates. The colorimetric spectrometer (CM-3500d) can measure color degree of whitening effect.

• 대한전자공학회논문지SP
• /
• 제41권5호
• /
• pp.251-258
• /
• 2004

본 논문은 디지털 카메라로 획득된 실영상에서 카메라의 응답분포의 특성을 이용하여 광원의 색도값을 추정하는 방법을 제안한다. 광휘도 영역을 이용하는 방법은 물체의 표면에 의한 색과 광원에 의한 색이 일정하게 변하는 특징을 이용하여 광원의 색도값을 추정한다. 일반적인 디지털 카메라 영상의 경우, 광휘도 영역의 화소들은 실영상에서 야기되는 광원의 기하학적 불균일성, 카메라에 의한 양자화 오차 및 CCD 센서의 불균일한 특성들을 포함하는 값이다. 그러므로 전처리 과정이 없는 카메라의 응답을 이용하여 광원을 추정한 결과, 정확한 광원의 색도값 추정이 어려웠다. 따라서 이 문제를 해결하기 위해서 본 논문에서는 카메라의 응답 특성을 조사하고, 광휘도 영역에서 Mahalanobis distance를 이용하여 화소들을 선택함으로써, 광원 추정의 정확성을 높이고자 하였다. 카메라 응답에서 Mahalanobis distance의 사용함으로써 광휘도 영역에서 분포된 화소들 중에서 유효한 화소들을 선택하는 것이 가능하다. 선택된 화소들을 주성분 분석 과정을 이용하여 r-g 좌표계에서 직선을 만들었으며, 그 직선들의 교차점으로부터 광원의 색도값을 추정하였다. 제안한 방법을 이용하여 다양한 실영상에서 실험한 결과 기존의 방법에 비해 광원 추정에 대한 오차가 감소함을 확인하였다.

• 한국가구학회지
• /
• 제23권1호
• /
• pp.68-74
• /
• 2012

In this study domestic thinning and small diameter woods of Giant dogwood (Cornus controversa Hemsl) was used. To increase the utilizability of wood, the utilizability was proposed after manufacturing laminated wood by pressing and heating. The physical and mechanical characteristics of Laminated wood were investigated and the color change was measured, using a Chromaticity coordinates, after being pressed at 10% (45 mm), 20% (40 mm), 30% (35 mm) for 5 minutes, using Stopper, and then heated at $180^{\circ}C$ for 6, 12, 24 and 48 hours. The results were as follows. Wood density, compressive strength, MOR, MOE are increased with increasing pressing rate but decreased as heating time is increased after pressing. However, Color change is clear, dimensional stability is improved after pressing and heating.

• 한국가구학회지
• /
• 제21권5호
• /
• pp.413-423
• /
• 2010

The study has been carried to evaluate the wood color, a typical element of visual and decorative effect, for seven major domestic softwoods using L*a*b* and chrominance ($\Delta$E*ab). The result showed that the values of whiteness, redness, and yellowness were positive at both sapwood and heartwood and there were no wood having a small chrominance difference ranged 0~0.5. There was also no wood having a chrominance difference ranging 0.5~3.0. Ginkgo biloba, Pinus koraiensis, and Larix kaempferi wood showed a little different chrominance, Taxus cuspidata, Pinus densiflora for. erecta, and Pinus densiflora wood substantial different chrominance, Juniperus chinensis wood largest different chrominance. It is concluded that the study results could be utilized as a data base in areas of wood craft and furniture and could open a way to substitute foreign imported woods.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권3호
• /
• pp.177-186
• /
• 2012

This paper presents a comparison of the failure mechanism for high power converted white LEDs(3W) with the commercially available YAG:Ce and silicate phosphor. We carry out the normal aging life test for 10,000 hours, the high temperature aging test for 8,000 hours, the high temperature and humidity aging test for 8,000 hours and the current aging testing for 5,000 hours. The optical and electrical parameters of LEDs were monitored, such as lumen, correlated color temperature (CCT), chromaticity coordinates(x, y), thermal resistance, I -V curve and spectrum intensity. The stress induced a luminous flux decay on LED in all experiments and causes a failure. So we try to find out what's a main failure mechanism for a high power LED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1529-1530
• /
• 2007

The manganese co-doped $Ca_8Mg_1(SiO_4)_4Cl_2:Eu^{2+}$,$Mn^{2+}$ phosphor was synthesized by solid-state reaction and its photoluminescence characteristics were investigated. The synthesized phosphor show two emission spetrums: green band of 512nm and yellow band of 550nm. White light-emitting diodes (LEDs) were fabricated through combination of a 405nm-emitting InGaN chip and a synthesis phosphor in a single package. Under 20mA current, its CIE chromaticity coordinates are x=0.40 and y=0.45 and a color temperature of 4053K.