• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.387-394
• /
• 2012

Most of the libraries and archives that lacks conservation lab facilities, frequently apply common synthetic resin adhesives such as PVAc group(Pa), acrylic group(Ac) and PVP group(Pv) on simple repairs. The archival quality synthetic adhesive(Pa-1) that is used at the National Library of Korea and the common synthetic resin adhesives were selected for the experiments. Accelerated aging test was applied on the adhesive samples and change of the pH and chromaticity were measured for one month. As the result of the pH mesurments, Pa-1 and Ac-2 were at the acceptable pH range. As the result of the chromaticity mesurments, degree of yellowing(${\Delta}b^*$) showed smaller change to greater change in the following order; Pa-1

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1069-1074
• /
• 2022

In this study, we prepared ITO thin films on the Nb₂O₅/SiO₂ double buffer layer and investigated electrical and optical properties according to the change of SiO₂ buffer layer thickness (40~50nm). The ITO thin film fabricated on the Nb₂O₅/SiO₂ double buffer layer exhibited a broad surface roughness with a small value ranging of 0.815 to 1.181nm, and the sheet resistance was 99.3 to 134.0Ω/sq. It seems that there is no problem in applying the ITO thin film to a capacitive touch screen panel. In particular, the average transmittance in the short-wavelength (400~500nm) region and the chromaticity (b^*) of the ITO thin film deposited on the Nb₂O₅(10nm)/SiO₂(40nm) double buffer layer showed significantly improved results as 83.58% and 0.05, respectively, compared to 74.46% and 4.28 of ITO thin film without double buffer layer. As a result, it was confirmed that optical properties such as transmittance in the short-wavelength region and chromaticity were remarkably improved due to the index matching effect in the ITO thin film with the Nb₂O₅/SiO₂ double buffer layer.

• Transactions of Materials Processing
• /
• v.24 no.2
• /
• pp.83-88
• /
• 2015

For chromaticity correction, it is necessary to dispense high viscosity phosphor slurry since it greatly affects the performance of white LEDs. However, it is quite difficult to dispense high viscosity fluorescent materials. In the current study, micro-discharge electrostatic printing has been used for dispensing various high viscosity phosphor slurries. We have achieved dispersions of up to 50 µg using drop on demand (DOD) discharge experiments. The experiments were conducted with different combinations of process variables such as applied voltage, pneumatic pressure, and frequency.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.4
• /
• pp.33-37
• /
• 2009

Purpose: To examine the coloring condition of titanium spectacle frames with various colors by using anodization method. Methods: We made an anodization coater. Platinum plate with $3{\times}3cm^2$ was used for a cathode and titanium spectacle frame specimens was mounted on an anode in an electrolyte. An electric source device were designed to supply steady state current. The color of the coated spectacle frame specimens were measured by a spectrophotometer equipped with an integrating sphere. We use CIE $L^*a^*b$ color system as chromaticity coordinates. Results: The thickness of $TiO_2$ of titanium spectacle frame specimens was varied as controlling current flow time for electrodes. The specimens with various kinds of color as a walnut, a yellow brown, a navy blue, a blue, a light blue, a mung bean, a yellowish green, a light purple, a purple, a flower pink, a bluish green, an emerald, and a green color etc. were obtained. The values of CIE $L^*a^*b^*$ for these specimens were measured and analyzed to be changed clockwise in chromaticity coordinates as the thickness of $TiO_2$ increases. Conclusions: We identified the coloring mechanism by anodization method in titanium spectacle frame specimens.

• Food Science and Preservation
• /
• v.9 no.4
• /
• pp.400-405
• /
• 2002

Herbs are widely used as a source of tea and otherwise such as botanical medicine, essential oil for perfumes, cosmetics, and food spices. This study was carried out to investigate the characteristics of herb tea prepared with lavender, rosemary, mint, thyme and sage cultivated in korea. Approximate composition were as follows : crude protein 1.4∼17.5%, crude fat 6.1∼15.8%, sugars 43.5∼61s%, crude ash 7.7∼10.7%. Minerals contents of Ca ranged 707∼1763mg%, P 234 ∼513mg%, K 2,391∼3,430mg%, and Mg 361∼573mg%. Vitamins were $\beta$ -Carotene 6.9∼27.7mg%, B$_1$, 0.34∼0.62mg%, B$_2$1.37 ∼2.52mg%, niacin 5.3∼8.8mg%, and C 102∼111mg%. The changes of chromaticity a and b, pH, and sugar content of the herb tea at the different temperatures were decreased 80$\^{C}$ and 100$\^{C}$ in comparison to 60$\^{C}$ but increased chromaticity L. In the result of sensory test of the processed herb tea was more preferred than the market goods.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.83-91
• /
• 2019

The purpose of this study is to assess a fire-damaged concrete structure using a digital camera and image processing software. To simulate it, mortar and paste samples of W/C=0.5(general strength) and 0.3(high strength) were put into an electric furnace and simulated from $100^{\circ}C$ to $1000^{\circ}C$. Here, the paste was processed into a powder to measure CIELAB chromaticity, and the samples were taken with a digital camera. The RGB chromaticity was measured by color intensity analyzer software. As a result, the residual compressive strength of W/C=0.5 and 0.3 was 87.2 % and 86.7 % at the heating temperature of $400^{\circ}C$. However there was a sudden decrease in strength at the temperature above $500^{\circ}C$, while the residual compressive strength of W/C=0.5 and 0.3 was 55.2 % and 51.9 % of residual strength. At the temperature $700^{\circ}C$ or higher, W/C=0.5 and W/C=0.3 show 26.3% and 27.8% of residual strength, so that the durability of the structure could not be secured. The results of $L^*a^*b$ color analysis show that $b^*$ increases rapidly after $700^{\circ}C$. It is analyzed that the intensity of yellow becomes strong after $700^{\circ}C$. Further, the RGB analysis found that the histogram kurtosis and frequency of Red and Green increases after $700^{\circ}C$. It is analyzed that number of Red and Green pixels are increased. Therefore, it is deemed possible to estimate the degree of damage by checking the change in yellow($b^*$ or R+G) when analyzing the chromaticity of the fire-damaged concrete structures.

• Journal of the Korean Home Economics Association
• /
• v.44 no.10
• /
• pp.47-55
• /
• 2006

The purpose of this study was to analyze and compare the color characteristics of preferred clothing textiles of college students. One hundred nine male and female college students were evaluated for their preference to clothing textiles in previous research. To analyze the color characteristics, spectral data were measured. Color, color tone, and values of $L^*,\;a^*,\;b^*$ according to clothing item were compared. In addition, chromaticity diagram was drawn. The results of this study were as following. 1. The color of the shirts textile that college student preferred most in spring/fall was PB(purple blue) color, lt(light) tone. In general, the preferred textiles for shirts represented a simple color that is close to achromatic color with light and soft shade. The color of the blouse textiles that college student preferred most was PB color, d(dull), g(grayish) and W(white) tone. 2. The most frequently shown color of upper garment was PB, followed by Y(yellow) for shirt and R(red) for blouses. College students prefer a simple color which is close to achromatic color, and a light and soft color was preferred for shirts fabric and they preferred various, medium shades, but closer to pure colors for blouses because college students tend to consider that the aesthetic side is important and usually wear blouses less often than shirts. 3. For slacks, the colors of the preferred textiles were B(blue), PB color and lt.g.(light grayish), g, d and bk(black) tone. Therefore, the preferred textiles for slacks represented simple colors such as bluish or close to achromatic color with light or dark shade. For skirt, YR(yellow red), PB color and lt.g, lt, d. tone were preferred. Therefore, soft light or moderately toned various colors that are close to pure color were especially preferred for skirts. 4. The colors of preferred fabrics for slacks and skirts differed. The colors of the preferred fabrics for slacks were mostly cold color, whereas those of skirts were mostly warm color. And college students preferred various, medium shaded and closer to pure colors for skirts because they tend to consider the aesthetic side as being important. 5. The pattern of preferred fabrics was mostly solid, regardless of clothing item, and melange was the second most preferred pattern. 6. Through the analysis of $L^*,\;a^*,\;b^*$ values, shirt and blouse textiles showed higher $L^*$ value than that of slacks and skirt. The preferred textiles of college students were generally close to achromatic color because the values of $a^*$, and $b^*$ were very low, as confirmed by the result of the chromaticity diagram.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.13 no.1
• /
• pp.13-24
• /
• 1995

The color filter os made in four methods ; dyeing, printing electrodisposition and pigment dispersed method. Among technologies for color filter manufacture, pigment-dispersed and hybrid method are dominant over all others in commercial manufacture of large scale, fine resolution color filter for liquid crystal display. In this paper to investigate the possibility of the color filter manufacture for LCD by screen printing method, we synthesyzed PVA/sbQ screen emulation for high resolution, estimated image of printed fine pattern and manufactured color filter by screen printing. Results of the study are as follow and found the screen printing method os useful and valid from it. 1. Fine pattern is formed due to photocyclodomerization of -C=C- bond at 342nm, on the other hand unexposured parts are removed in water. 2. sharpness and resolution of fine pattern is improved at mesh streching angle 22.5 and 45 than 0 degree. It is expected due to resistance between inks and mesh streching angles. 3. Spectral characteristics of sample inks were R(640nm), G(535nm), B(470nm), transmittance were R(92%), G(79%), B(70%) and chromaticity coordinate values were R(0.62,0.33), G(0.32,0.59), B(0.14,0.17)

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.511-526
• /
• 2018

Effects of heat treatment on the characteristics of Royal paulownia (Paulownia tometosa) wood were investigated. The results were compared with those of Suwon silver poplar (Populus tementiglandulosa) and Korean red pine (Pinus densiflora) woods. The wood samples of the three species were treated at $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$ and $220^{\circ}C$ in an electric furnace for 2 hours. The changes of color, density, mass loss, and relative crystallinity were investigated before and after heat treatment. The lightness ($L^*$) decreased rapidly from $200^{\circ}C$ in all species. There were no change in red-green chromaticity($a^*$) and yellow-blue chromaticity($b^*$) of Royal paulownia and poplar woods with increasing temperature. Whereas, yellow-blue chromaticity($b^*$) of Korean red pine wood decreased sharply from $200^{\circ}C$. Royal paulownia wood showed appreciable color change(${\Delta}E^*$) after heat treatment above $180^{\circ}C$. Poplar and pine woods, however, presented significant color change from $160^{\circ}C$. Color change of the three wood species increased rapidly with increasing temperature. Mass loss of the three wood species by heat treatment was the highest in the Royal paulownia wood and the lowest in the pine wood. Mass loss and relative crystallinity increased and density decreased slightly with increasing temperature. Consequently, it is revealed that Royal paulownia wood showed considerable differences in the temperature of color change, weight loss and change of relative crystallinity compared to the other wood species.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.4
• /
• pp.589-595
• /
• 2010

The purpose of this study was to investigate the practical application and optimum conditions for adding functional dropwort, which is rich in physiological activity to Sulgidduk, toward developing dropwort-added dduk as a healthy food. To this end, samples of Sulgidduk with 0, 1, 3, 5 and 7% added dropwort powder were prepared, stored for 2 days at $20^{\circ}C$, after which the water content, chromaticity, and mechanical and sensory quality characteristics were measured. The results were as follows. The water content of nonglutinous rice powder and dropwort powder used for dropwort-added Sulgidduk was 41.73% and 3.5%, respectively. The water content decreased with increasing amounts of dropwort powder the group with 7% added dropwort powder was 33.88%, the lowest. For chromaticity, the L value decreased with increasing amount of dropwort powder with significant differences between groups with different added amounts (p<0.001). The a and b values increased with increasing amount of dropwort powder while they were 7.21 and 29.22, respectively, in the 7% dropwort powder-added group with significant differences between samples (p<0.001). For mechanical quality characteristics hardness decreased with increasing of amount of dropwort powder with significant differences between samples (p<0.001). There was no difference between samples in cohesiveness and springiness. Gumminess increased with increasing amount of dropwort powder with significant differences between samples (p<0.05). Chewiness and adhesiveness had a tendency to decrease with increasing amounts of dropwort powder. Overall acceptability was in the order of 3%, 5%, 1%, 7%, and 0% dropwort powder-added groups. Overall, for dropwort powder added Sulgidduk, the quality of flavor, color and taste was acceptable, compared to other powder-added groups. The 3% dropwort powder-added group was highly rated in general preference making it most desirable for making dropwort powder-added Sulgidduk.