• 제목/요약/키워드: chlorine content

검색결과 185건 처리시간 0.025초

Physicochemical properties, cytotoxicity and penetration into dentinal tubules of sodium hypochlorite with and without surfactants

  • Hernan Coaguila-Llerena;Isadora Barbieri ;Mario Tanomaru-Filho ;Renato de Toledo Leonardo;Ana Paula Ramos ;Gisele Faria
    • Restorative Dentistry and Endodontics
    • /
    • 제45권4호
    • /
    • pp.47.1-47.11
    • /
    • 2020
  • Objectives: The aim of this study was to assess the physicochemical properties, cytotoxicity and penetration into dentinal tubules of ChlorCidTM Surf (3% sodium hypochlorite [NaOCl] with surfactant) in comparison to ChlorCidTM (3% NaOCl without surfactant). Materials and Methods: The physicochemical properties evaluated were pH, surface tension, free available chlorine (FAC) and contact angle. Cytotoxicity was evaluated in L929 fibroblasts exposed to the solutions by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide and neutral red assays. Assessment of penetration into dentinal tubules was performed by staining single-rooted permanent human teeth with crystal violet (n = 9), which were irrigated with the solutions and analyzed in cervical, middle and apical segments. Data were analyzed by one-way analysis of variance (ANOVA) and Tukey's post-test, 2-way ANOVA and Bonferroni's post-test or t-test (α = 0.05). Results: ChlorCidTM Surf and ChlorCidTM FAC values were close to those indicated by the manufacturer. ChlorCidTM Surf showed lower surface tension and contact angle on dentin, and higher pH than ChlorCidTM (p < 0.05). The penetration of ChlorCidTM Surf was higher in cervical and middle segments, compared with ChlorCidTM (p < 0.05). There was no difference in irrigant cytotoxicity (p > 0.05). Conclusions: ChlorCidTM Surf showed lower surface tension, lower contact angle on root canal dentin, higher penetration into dentinal tubules and more alkaline pH, compared with ChlorCidTM. However, both solutions showed similar cytotoxicity and FAC content.

시멘트 염소 함량과 콘크리트의 슬럼프, 압축강도 간의 상관관계 연구 (A Study on the Correlation between Cement Chlorine Content and Concrete Slump, Compressive Strength)

  • 김경석;서동균;우지완;최재원;유병노
    • 한국건설순환자원학회논문집
    • /
    • 제12권2호
    • /
    • pp.143-151
    • /
    • 2024
  • 본 연구에서는 콘크리트 슬럼프 및 압축강도와 시멘트 염소 함량을 포함한 기타 요인과의 상관관계에 대해 통계적으로 분석하였다. 시멘트 염소 함량은 236 ~ 794 ppm 범위로 선정했으며, 기타 물성들은 KS L 5201 규격에 만족하는 시멘트를 사용하였다. 분석 결과, 어떠한 요인들과도 초기 슬럼프와는 상관관계가 존재하지 않았다. 슬럼프 경시변화에서의 염소 성분은 강한 음의 상관관계를 나타내고 있으며, 1일 ~ 7일 압축강도에서는 강한 양의 상관관계를 갖고 있는 것으로 분석되었다. 한편, 28일 압축강도에서는 염소 성분과 압축강도 간의 상관성이 없는 것으로 확인되었다.

Effects of chloride ion transport characteristics and water pressure on mechanical properties of cemented coal gangue-fly ash backfill

  • Dawei Yin;Zhibin Lu;Zongxu Li;Chun Wang;Xuelong Li;Hao Hu
    • Geomechanics and Engineering
    • /
    • 제38권2호
    • /
    • pp.125-137
    • /
    • 2024
  • In paste backfill mining, cemented coal gangue-fly ash backfill (CGFB) can effectively utilize coal-based solid waste, such as gangue, to control surface subsidence. However, given the pressurized water accumulation environment in goafs, CGFB is subject to coupling effects from water pressure and chloride ions. Therefore, studying the influence of pressurized water on the chlorine salt erosion of CGFB to ensure green mining safety is important. In this study, CGFB samples were soaked in a chloride salt solution at different pressures (0, 0.5, 1.5, and 3.0 MPa) to investigate the chloride ion transport characteristics, hydration products, micromorphology, pore characteristics, and mechanical properties of CGFB. Water pressure was found to promote chloride ion transfer to the CGFB interior and the material hydration reaction; enhance the internal CGFB pore structure, penetration depth, and chloride ion content; and fill the pores between the material to reduce its porosity. Furthermore, the CGFB peak uniaxial compression strain gradually decreased with increasing soaking pressure, whereas the uniaxial compressive strength first increased and then decreased. The resulting effects on the stability of the CGFB solid-phase hydration products can change the overall CGFB mechanical properties. These findings are significant for further improving the adaptability of CGFB for coal mine engineering.

임해준설매립지 식물분포와 표층토양의 이화학적 특성 (Plant Distributions and Physicochemical Characteristics of Topsoil on the Reclaimed Dredging Area)

  • 남웅;곽영세;정인호;이덕범;이상석
    • 한국조경학회지
    • /
    • 제36권3호
    • /
    • pp.52-62
    • /
    • 2008
  • 본 연구는 광양제철소 임해준설매립지에 자생하는 식물분포와 토양환경요인의 특성을 규명하고, 식물분포와 토양과의 상관관계를 밝힘으로써 향후 생태적 조경의 활용방안을 제시하고자 한다. 연구대상지는 해수변으로부터 시작하여 표고 15m에 이르는 지역으로 임해준설매립지내 조사지역 1,2,3 및 4는 전형적인 염습지의 특정을 나타내었다. 조사지역의 총 출현종수는 1, 2, 3, 4, 5지역별로 각각 13, 15, 22, 27, 35종으로 증가하는 것으로 나타났으며, 염생식물은 감소하고 중성식물은 증가하는 경향을 나타내었다. 각 조사지역별 표층토양(O ~2Ocm)의 물리, 화학적 특성을 분석한 결과, 조사지역 1 에 서 조사지역 4로 이동함에 따라 탈염이 진행되면서 토양산도 및 전기전도도는 낮아지고, 영분, 유효인산, 칼륨, 염소, 칼숨, 마그네숨 등은 함량이 감소된 반면, 전 질소, 미사, 점토함량은 증가하는 경향을 보여주었다. 이는 임해준설매립지에서 자연강우에 토양이 장기간 노출되면서 염분과 관련된 토양환경인자들이 변화하는 것을 잘 나타내는 것이다. 이러한 분석 결과, 염분과 관련된 인자들이 연구대상지의 식물분포의 변화를 유도한 주요한 영향요인으로 밝혀졌다.

간척지대에 매설된 대구경 금속관의 외면 부식손상 평가 (Assessment of external corrosion deterioration of large diameter metallic water pipes buried in reclaimed land)

  • 이호민;최태호;김정현;배철호
    • 상하수도학회지
    • /
    • 제34권5호
    • /
    • pp.373-383
    • /
    • 2020
  • The purpose of this study was to evaluate the corrosion damage of large diameter metallic pipes buried in reclaimed land due to the corrosion effect by soil, and to propose a method of installing metal pipes in the reclaimed land. The results are as follow. First, the soil of the reclaimed land was gray clay, the soil specific resistance indicating soil corrosiveness was at least 120 Ω-cm, the pH was weakly acidic(5.04 to 5.60), the redox potential was at least 62 mV, the moisture content was at most 48.8%, and chlorine ions and sulfate ions were up to 4,706.1 mg/kg and 420 mg/kg. Therefore, the overall soil corrosivity score was up to 19, and the external corrosion effect seems to be very large. Second, the condition of straight part of pipes was in good condition, but most of KP joints were affected by corrosion at a severe level. The reason for this seems to be that KP joints accelerated corrosion due to stress and crevice corrosion in addition to galvanic corrosion in the same environment. Third, as a result of evaluating correlations of each item that affects the corrosion on the external part, the lower the soil resistivity and redox potential, the greater the effect on the KP joints corrosion, and the moisture content, chloride ion, and sulfate ion, the higher the value, the greater the effect on the corrosion of KP joints. In addition, among soil corrosion items, the coefficient of determination of soil resistivity with corrosion of KP joints was the highest with 0.6439~0.7672. Fourth, when installing metal pipes or other accessories because the soil of the reclaimed land is highly corrosive, it is necessary to apply a corrosion preventive method to extend the life of pipes and prevent leakage accidents caused by corrosion damage to the joint.

PEMOCVD of Ti(C,N) Thin Films on D2 Steel and Si(100) Substrates at Low Growth Temperatures

  • Kim, Myung-Chan;Heo, Cheol-Ho;Boo, Jin-Hyo;Cho,Yong-Ki;Han, Jeon-Geon
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1999년도 제17회 학술발표회 논문개요집
    • /
    • pp.211-211
    • /
    • 1999
  • Titanium nitride (TiN) thin films have useful properties including high hardness, good electrical conductivity, high melting point, and chemical inertness. The applications have included wear-resistant hard coatings on machine tools and bearings, decorative coating making use of the golden color, thermal control coatings for widows, and erosion resistant coatings for spacecraft plasma probes. For all these applications as feature sizes shrink and aspect ratios grow, the issue of good step coverage becomes increasingly important. It is therefore essential to manufacture conformal coatings of TiN. The growth of TiN thin films by chemical vapor deposition (CVD) is of great interest for achieving conformal deposition. The most widely used precursor for TiN is TiCl4 and NH3. However, chlorine impurity in the as-grown films and relatively high deposition temperature (>$600^{\circ}C$) are considered major drawbacks from actual device fabrication. To overcome these problems, recently, MOCVD processes including plasma assisted have been suggested. In this study, therefore, we have doposited Ti(C, N) thin films on Si(100) and D2 steel substrates in the temperature range of 150-30$0^{\circ}C$ using tetrakis diethylamido titanium (TDEAT) and titanium isopropoxide (TIP) by pulsed DC plamsa enhanced metal-organic chemical vapor deposition (PEMOCVD) method. Polycrystalline Ti(C, N) thin films were successfully grown on either D2 steel or Si(100) surfaces at temperature as low as 15$0^{\circ}C$. Compositions of the as-grown films were determined with XPS and RBS. From XPS analysis, thin films of Ti(C, N) with low oxygen concentration were obtained. RBS data were also confirmed the changes of stoichiometry and microhardness of our films. Radical formation and ionization behaviors in plasma are analyzed by optical emission spectroscopy (OES) at various pulsed bias and gases conditions. H2 and He+H2 gases are used as carrier gases to compare plasma parameter and the effect of N2 and NH3 gases as reactive gas is also evaluated in reduction of C content of the films. In this study, we fond that He and H2 mixture gas is very effective in enhancing ionization of radicals, especially N resulting is high hardness. The higher hardness of film is obtained to be ca. 1700 HK 0.01 but it depends on gas species and bias voltage. The proper process is evident for H and N2 gas atmosphere and bias voltage of 600V. However, NH3 gas highly reduces formation of CN radical, thereby decreasing C content of Ti(C, N) thin films in a great deal. Compared to PVD TiN films, the Ti(C, N) film grown by PEMOCVD has very good conformability; the step coverage exceeds 85% with an aspect ratio of more than 3.

  • PDF

격막 방식에 따라 제조한 전해수의 세척 및 보관 효과 (Cleaning and Storage Effect of Electrolyzed Water Manufactured by Various Electrolytic Diaphragm)

  • 김명호;정진웅;조영제
    • 한국식품저장유통학회지
    • /
    • 제11권2호
    • /
    • pp.160-169
    • /
    • 2004
  • 격막 및 무격막 방식의 전해수 처리에 의한 샐러리 및 생굴의 세정처리에 따른 살균 및 저장성 효과를 조사하였다. 샐러리를 대상으로 세정처리에 따른 저장중의 품질변화를 살펴본 결과, 총균수는 전해수 처리구에서 무처리구에 비하여 약 1/200∼1/1,000 수준, 대장균군수는 약 1/100 수준으로 감소하였다. 그리고 수분함량, pH, 경도, 비타민 C 및 잔류염소 함량 등의 변화는 저장 10일째까지 처리구에 관계없이 거의 유사한 경향을 보이거나 차이가 없는 것으로 나타났다. 색도는 모든 처리구에서 저장기간이 경과함에 따라 L값과 a값은 서서히 증가함을 보여 주었으며, 색차($\Delta$E)값은 저장 5일 경과 후부터는 처리구에 관계없이 6 수준으로 초기치와의 차이를 식별할 수 있는 정도로 나타났다. 종합적 기호도는 전해수 처리구는 저장 후 5일째까지는 수도수 및 염소계 세정제로 처리한 샐러리에 비해 다소 양호한 것으로 나타났으나 저장 5일째 이후는 수도수 및 염소계 세정제로 처리한 샐러리와 유사하거나 다소 떨어지는 기호도를 나타내었다. 무격막 시스템으로 제조한 약알칼리성 전해수로 처리한 생굴은 해수로 처리한 시료에 비해 보관 48시간 후 VBN은 약 3 mg%, 총균수는 약 1∼2 log cycle, 대장균은 2 log cycle 정도 낮은 값을 나타내었고 또한, 처리직후 총균수도 해수로 처리한 생굴에 비해 1 log cycle 정도 낮은 초기 수준을 보이며 보관 24∼48시간까지는 뚜렷한 증가를 나타내지 않았다.

목질계 바이오매스 연소부산물 분석과 모르타르 혼입 평가 (Investigative Analysis of By-products from Lignocellulosic Biomass Combustion and Their Impact on Mortar Properties)

  • 정영동;김민수;박원준
    • 한국건축시공학회지
    • /
    • 제23권6호
    • /
    • pp.663-671
    • /
    • 2023
  • 본 연구에서는 목질계 바이오매스(Bio-SRF, 우드펠릿)를 연료로 사용하는 발전소 3곳에서 배출된 4종의 목질계 플라이애시(FA)의 재활용성을 실험적으로 검토하였다. FA의 물리 분석(입형, 입도분포, 분말도, 밀도)과 화학 분석(화학조성, 중금속 함량)을 수행하였고, KS L 5405에 준하여 혼입률 5~20%의 모르타르 시험체를 제작하고 플로우와 압축강도를 측정하였다. 4종의 FA는 입경 약 20~30㎛, 밀도 약 2.3~2.5g/cm3, 분말도 2,600~4,900cm2/g, SiO2, Al2O3, Fe2O3, CaO 성분이 약 50~90%를 차지하고 있으며, 염소와 SiO2 함량을 배제하고 KS L 5405의 FA 2, 3형과 유사한 특성을 보였다. 모르타르 혼입 평가 결과, 펠릿 연소 FA는 5~20% 혼입 범위에서 모르타르 압축강도는 34~47MPa로 측정되었다. 목질계 연료 100%를 연소한 FA는 혼화재 대체재로서 재활용성이 높다고 평가된다.

임해매립지의 생태계 복구를 위한 토양중 염류의 활성도 분석 (Effect of Soil Salinity for Ecological Restoration in the Reclaimed Area of Seasides)

  • 정관순;김형복
    • 한국토양비료학회지
    • /
    • 제32권2호
    • /
    • pp.147-154
    • /
    • 1999
  • 본 연구는 임해매립지에서 생태적인 복구를 위한 토양관리 방안을 제시하기 위하여 매립특성에 따라 준설매립지역에서 매립연도를 구분하여 준설토의 화학적 특징을 조사하였고, 수목이 염류에 피해를 받지 않도록 여러 가지 식재기반을 조성한 후 조성방법에 대한 염류차단 효과를 검토하였다. 준설초기의 토양은 침출용액의 pH 7.5, EC $11.3{\sim}10.6dSm^{-1}$ 치환성나트륨백분율이 34.8~35.2%로 알칼리성염류토양의 특징을 나타냈고, EC, 치환성 $Na^+$, $Cl^-$의 양은 매립 후 6년까지 현저하게 감소되었으나 토양의 화학적 특성은 수목이 생장하기에는 아주 부적절한 조건을 가지고 있었다. 식재기반 조성지에서 토양중 치환성나트륨백분율은 표층보다 심층에서 높았으며, 완충녹지보다 근린공원과 가로수지역에서 높게 나타났다. 토양포화침출용액에서 $Na^+$, $Cl^-$$SO_4^{2-}$의 농도는 다른 이온들보다 높았고, $Na^+$, $Cl^-$의 농도는 표층보다 심충에서 증가하였으며, 완충녹지보다 근린공원과 가로수지역에서 높았다. 토양중 $Ca^{2+}+Mg^{2+}$ 함량은 근린공원과 가로수지역보다 완충녹지에서 높았으나 토양 포화침출용액내 $Ca^{2+}+Mg^{2+}$ 함량은 완충녹지보다 근린공원과 가로수에서 높았는데 이는 토양중 치환성 $Na^+$ 함량 차이에서 기인되었다. 따라서 임해매립지의 식재기반 조성방법에 대한 염류차단효과는 완충녹지가 가장 높았으며, 가로수지 역에서 염분농도는 가장 높게 나타났다. 그리고 동일한 식재기반 조성에 대하여 성토높이에 따라서 염분차단 효과는 다르게 나타나 성토 높이가 70cm보다 120cm인 지역이 토양중 염분농도가 낮았다.

  • PDF

저농도 서방형 이산화염소 가스 병합처리가 파프리카의 저장 중 미생물 성장과 품질에 미치는 영향 (Effects of Combined Chlorine Dioxide Gas Treatment Using Low-Concentration Generating Sticks on the Microbiological Safety and Quality of Paprika during Storage)

  • 강지훈;박신민;김현규;손현정;송경주;조미애;김종락;이정용;송경빈
    • 한국식품영양과학회지
    • /
    • 제45권4호
    • /
    • pp.619-624
    • /
    • 2016
  • 이전 연구에서 이산화염소 가스 훈증처리가 수확 후 파프리카의 미생물학적 안전성을 향상할 수 있다고 보고한 바 있다. 이에 관한 후속 연구로써 본 연구에서는 파프리카의 장기 저장성 확보를 목적으로 저장 중 품질 유지와 부패 감소를 위해 고농도 이산화염소 가스 처리된 파프리카를 $8{\pm}1^{\circ}C$, 상대습도 90%의 조건에서 저장하면서 저농도 서방형 이산화염소 가스 발생제(팜이톡, 3 ppmv)를 이용한 추가적인 병합처리를 수행하였다. 저장 초기 이산화염소 가스 병합처리구의 총 호기성 세균은 대조구와 비교하여 3.04 log CFU/g의 감소를 했고, 효모와 곰팡이는 2.70 log CFU/g의 감소를 나타내었으며, 이러한 이산화염소 가스 병합처리의 미생물 저감 효과는 저농도 서방형 이산화염소 가스 발생제 처리로 저장 기간 유지되었다. 특히, 부패율에서 병합처리구가 대조구보다 유의적으로 낮았다. 파프리카의 품질 변화지표(비타민 C 함량, 경도, 색도)와 관련하여 이산화염소 가스 병합처리구와 대조구 모두 저장 기간 차이를 나타내지 않았으나, 저장 중 중량감소율은 병합처리구가 대조구보다 낮은 수준을 유지하였다. 따라서 본 연구 결과, 수확 후 파프리카에 두 가지 형태의 이산화염소 가스를 병합처리 하는 것이 단일처리보다 저장과 유통과정 중 파프리카의 품질을 유지하면서 부패율을 낮출 수 있는 더 효과적인 처리 방법이라고 판단된다.