• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.181-183
• /
• 2007

본 논문은 RF 리더기와 RF 태그 상호간의 통신시에 발생할 수 있는 충돌을 감지하고 이를 능동적으로 회피할수 있는 RFID(Radio Frequency IDentification)의 설계에 관한 내용이다. RFID는 사람, 자동차, 화물, 상품 등에 정보를 부가하는 시스템으로 그 부가정보를 무선통신매체를 이용하여 비접족으로 해독하는 시스템으로 기존의 바코드보다 데이터의 전송속도와 용량의 증가 그리고 편리성이 향상되는 장점이 있으나, 동시에 여러개의 RF태그와의 무선통신으로 인한 데이터의 충돌이 발생할 수 있다. 이러한 충돌을 감지하고 이를 적절하게 회피하는 것은 RFID 시스템의 신뢰성을 높이는데 필수적인 요소이다. RFID 태그로 사용되기 위해서는 건전지로 구동될 수 있도록 저전력소모가 요구되며 또한 통신의 시작과 충돌을 파악할 수 있는 캐리어 감지기능이 필수적이다. 본 논문에서는 이러한 조건들을 만족하는 Chipcon 사(社)의 양방향 RF IC를 사용하였다. Chipcon 사(社)의 양방향 RF IC는 다중 주파수 대역의 선택과 변조방식을 시리얼통신을 통해서 손쉽게 변경할 수 있기 때문에 충돌감지시 다양한 회피알고리즘을 상황에 맞게 구현할 수 있다. 본 논문에서는 양방향 RF IC를 사용하여 충돌을 감지하고 회피할 수 있는 RFID시스템을 설계하고 구현하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.447-450
• /
• 2005

This paper describes an implementation of system based on ZIGBEE wireless communication technique to prevent for diseases of skin ailments and respiratory ailments as sensing the air pollutions that breaks out in the inside and purifying. ZIGBEE wireless communication technique has features - low battery consumption, low cost, acceptance of the maximum 256 node and simple protocol structure of below 32Kbyte. Hardware platform is implemented by using ATmega128L in ATmel corporation and 2.4GHz RF-IC CC2420 in Chipcon corporation and dust sensor(GP2Y1010AU) and gas sensor(GSBT11) that confirm degree of inside air pollution for ZIGBEE wireless communication technique.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.364-367
• /
• 2007

We combined CC2431(Chipcon, Norway), as the platform for the Indoor Location Tracking, which follows Zigbee/IEEE802.15.4 standards in RSSI (Received Signal Strength Indicator) and Base Station Node and then, embodied Indoor Location Tracking System. CC2431 is composed of the Reference Node that transfer its current position at the designated place and the Blind Node. The Blind node receives the current position(X and Y coordinates) of the Reference Node fields which are being contiguous and also, calculates its current position and transfers it to the Base Station Node. The base station node is used for receiving the current position of blind node and passing its data to the PC as a gateway. We can make sure where is the Blind Node not only from the out-of-the-way place of the server side but from the outside in a real-time.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.538-539
• /
• 2008

유비쿼터스 컴퓨팅의 실현을 위해 센서 네트워크 기반의 다양한 위치인식 연구가 수행되었다. 특히 근거리 위치 인식 분야에서는 RSSI를 이용한 위치 인식에 관한 연구가 활발하였으나 RSSI는 통신 환경에 민감하여 균일한 위치 정보 결과를 획득하기 어려우며, RSSI 값을 기반으로 삼각측량 등의 위치 계산을 소프트웨어적으로 처리하기 때문에 응답 속도가 늦다는 단점이 있다. 따라서 최근 Chipcon에서는 CC243x 시리즈에 위치 계산 엔진(Location Engine)을 탑재하여 응답 속도에 대한 종전의 단점을 보완하였으나 여전히 위치 값이 고르지 못한 부분은 개선되지 않았다. 따라서 본 논문에서는 통신 환경으로 인한 위치 정보의 불균등함을 개선하고자 선형 윈도우 알고리즘을 제안한다. 선형 윈도우는 위치 정보에 대한 스무팅을 수행하며, 이를 통해 응답 속도의 저하를 최소화시키면서 위치 변화를 고르게 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2641-2646
• /
• 2009

The more growing on home automation system at automatic control, the more efficiency required for energy consumption and for recycling energy in near future. Heating is essential in general apartment. Heating method is two types in apartment. One uses electricity, and other one uses warm water. If use electricity, is not efficient by rise of electric charges. But, It can reduce much in expense aspect, if use warm water. When use warm water, temperature of warm water is not equal from all pipe parts. Therefore, indoor tempera can be unequal with set point. Solution of these problems is as following. Temperature sensor in warm water attach pipe. The measured temperature transmits by real time. Temperature of warm water controls in receiver side. In this paper, we propose an automatic temperature transmission system for the heating pipe at home, that is a low-power based, and supply the energy source from a small AC motor resided in bottom cement mortal. The proposed system is used in power mechanism from a collision process of water-jet using propeller water-difference and also designed a CPU module by Atmega8 at ATMEL co., Inc. and a communication module by CC1020 at Chipcon co., Inc.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1826-1829
• /
• 2005

Recent advancement in wireless communications and electronics has enabled the development of low power sensor network. Wireless sensor network are often used in remote monitoring control applications, health care, security and environmental monitoring. Wireless sensor networks are an emerging technology consisting of small, low-power, and low-cost devices that integrate limited computation, sensing, and radio communication capabilities. Sensor network platform for health care has been designed, fabricated and tested. This system consists of an embedded micro-controller, Radio Frequency (RF) transceiver, power management, I/O expansion, and serial communication (RS-232). The hardware platform uses Atmel ATmega128L 8-bit ultra low power RISC processor with 128KB flash memory as the program memory and 4KB SRAM as the data memory. The radio transceiver (Chipcon CC1000) operates in the ISM band at 433MHz or 916MHz with a maximum data rate of 76.8kbps. Also, the indoor radio range is approximately 20-30m. When many sensors have to communicate with the controller, standard communication interfaces such as Serial Peripheral Interface (SPI) or Integrated Circuit ($I^{2}C$) allow sharing a single communication bus. With its low power, the smallest and low cost design, the wireless sensor network system and wireless sensing electronics to collect health-related information of human vitality and main physiological parameters (ECG, Temperature, Perspiration, Blood Pressure and some more vitality parameters, etc.)

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.393-398
• /
• 2009

In this paper, we study the design and implementation of an auto recognition system by using wireless sensor node. RFID system has a limited communication range and communication network is damaged, it is impossible to communicate. Therefore, easy installation and low cost wireless system are required in an area where the installation of communication between RFID system and monitoring system is difficult, or a portable RFID system is installed. The auto recognition system in this study is implemented by the combination of 13.56MHz RFID system using MLX12115 RFID chip of Melexis company and wireless sensor node system using CC2420 Zigbee chip of Chipcon company. As a result, we develop an auto recognition system which makes it possible to get tag's information wirelessly. Also, it has a simple circuit structure and is small in size.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.37-42
• /
• 2007

This paper reconsiders established power conservation models for ubiquitous sensor networks that use relay nodes instead of direct communication and proposes novel network power consumption model with consideration of the channel level and radio chip level simultaneously. We estimate the effect of minimum hop-count policy in terms of network power consumption through simulation of various situations for low power RF module CC2420. It is observed that maximum RF power and minimum hop-count results in lower energy consumption relatively. Also, in total network energy consumption, which is included re-transmission, minimum hop count policy presents decrease by 33.1% of energy consumption in compare with the conventional model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.473-476
• /
• 2007

Location determination of mobile user via RSSI approach has received ample attention from researchers lately. However, it remains a challenging issue due to the complexities of RSSI signal propagation characteristics, which are easily exacerbated by the mobility of user. Hence, a segmentation-based linear spline interpolation method is proposed to cater for the dynamic fluctuation pattern of radio signal in complex environment. This optimization algorithm is proposed in addition to the current radiolocation's (CC2431, Chipcon, Norway) algorithm, which runs on IEEE802.15.4 standard. The enhancement algorithm involves four phases. First phase consists of calibration model in which RSSI values at different static locations are collected and processed to obtain the mean and standard deviation value for the predefined distance. RSSI smoothing algorithm is proposed to minimize the dynamic fluctuation of radio signal received from each reference node when the user is moving. Distances are computed using the segmentation formula obtain in the first phase. In situation where RSSI value falls in more than one segment, the ambiguity of distance is solved by probability approach. The distance probability distribution function(pdf) for each distances are computed and distance with the highest pdf at a particular RSSI is the estimated distance. Finally, with the distances obtained from each reference node, an iterative trilateration algorithm is used for position estimation. Experiment results obtained position the proposed algorithm as a viable alternative for location tracking.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.623-628
• /
• 2009

The emergence of compact and low-power wireless communication sensors and actuators in the technology supporting the ongoing miniaturization of processing and storage allows for entirely the new kinds of embedded systems. These systems are distributed and deployed in environments where they may have been designed into a particular control method, and are often very dynamic. Collection of devices can communicate to achieve a higher level of coordinated behavior. Wireless sensor nodes deposited in various places provide light, temperature, and activity measurements. Wireless sensor nodes attached to circuits or appliances sense the current or control the usage. Together they form a dynamic and multi-hop routing network connecting each node to more powerful networks and processing resources. Wireless sensor networks are a specific-application and therefore they have to involve both software and hardware. They also use protocols that relate to both applications and the wireless network. Wireless sensor networks are consumer devices supporting multimedia applications such as personal digital assistants, network computers, and mobile communication devices. Wireless sensor networks are becoming an important part of industrial and military applications. The characteristics of modem embedded systems are the capable of communicating adapting the different operating environments. In this paper, We designed and implemented sensor network system which shows through host PC sensing temperature and humidity data transmitted for wireless sensor nodes composed wireless temperature and humidity sensor and designs sensor nodes using embedded system with the intention of studying USN.