• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.1
• /
• pp.7-14
• /
• 1989

This experiment was carried out to determine the seasonal herbage production and utilization during the growing season of pasture on the forest (shading 30%). Plant height, leaf area index(LAl), dry matter(DM) production and distribution, chemical composition, in vitro dry matter digestibility(IVDMD), herbage utilization percentage and chewing efficiency were investigated using the Corridale sheep. Experimental field was treated by one plot design(3 rep.) and performed from 1987 to 1988 at Chungnam National University, Daejon. The results obtained are summarized as follows: 1. The highest plant height and LA1 were observed in May(35.0 cm, 4.89), followed by April(28.0 cm, 4.23), while the plant height and LA1 in October (13.0 cm, 0.49) showed very low. 2. During the growing season, about 58.3 % of annual DM production (7240 kg/ha) was produced during the spring (April, May and June) and the highest DM production was obtained in May (2040 kg/ha), which was more than 28.2 % of total DM production. However, DM production in July and August was about 24.2 % and those in September and October (17.5 %) was very low, but the difference of DM production from June to September was small. 3. The maximum DM production per day (65.8 kg/ha) was observed in May, followed by June (28.7 kglha), while DM production per day in October (16.5 kg/ha) showed very low (p <0.01). 4. Crude protein content and IVDMD of herbage samples during the spring (April, May and June) were higher, while crude fiber, ADF, and NDF content were lower in an summer growth herbage samples (July and August), but autumn growth herbage samples was intermediate. Crude ash content and IVDMD of collected herbage samples were slightly more, while crude fiber, ADF and NDF content were slightly less than offered and residued herbage samples during the growing season. 5. The maximum DM intake per metabolic body size was observed in May(68.9 g), followed by October (66.7 g), while very low in August (52.5 g). Significant positive correlation (p <0.05) was found between DM intake and IVDMD. 6. Herbage utilization percentage was very high in April (83.4 %), while very low in August (64.0 %). The percentage of annual herbage utilization was about 75.5 %. 7. The maximum ruminating and chewing efficiency of herbage samples were observed in May, followed by October, while very low in August.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.7
• /
• pp.833-840
• /
• 2017

For wide application of perilla leaf, which has various healthy functions and can be easily cultured across Korea, the physicochemical and sensory properties of pan bread made with various amounts of squeezed perilla leaf juice (SPLJ) were analyzed. When dough characteristics were analyzed by using farinograph, consistency and dough development time were not significantly different between the control and bread dough made with various amounts of SPLJ, whereas dough stability time increased with increasing SPLJ amount. Expansion rate of dough decreased with increasing SPLJ amount. The volume, specific volume, and baking loss rate of pan bread made with various SPLJ amounts decreased with increasing SPLJ amount. Pan bread crumb colors became thickened and greenish with increasing SPLJ amount. For physical properties of pan bread made with various SPLJ amounts, springiness and cohesiveness decreased with increasing SPLJ amount, whereas brittleness, chewiness, and hardness increased with increasing SPLJ amount. In the sensory strength analysis, pore uniformity and soft texture decreased with increasing SPLJ amount, whereas crumb color (dark greenish), perilla leaf odor, perilla leaf taste, and chewing texture increased with increasing SPLJ amount. In the overall acceptance analysis, 1.5% SPLJ was the most preferred with a score of 7.10. However, statistical differences between 1.5% and 1.0% SPLJ were not detected at P<0.05. In the partial least squares analysis, consumers liked bread with a green crumb color, perilla leaf odor, perilla leaf taste, and soft and chewing texture. In conclusion, physicochemical properties of pan bread made with SPLJ were less desirable than those of the control; however, consumer acceptance of pan bread made with 1.5% SPLJ was shown the highest. Therefore, methods for increasing physicochemical properties of pan bread made with SPLJ need to be developed for wide application of perilla leaf.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.129-133
• /
• 2007

This study was carried out to see the effect of dental auxiliary product groups being used in case of not being able to brush teeth. This study was executed for 70 students in the Dept. of Dental Hygiene of S Health College, and it was divided into the group which used brushing teeth, the one which used only dental auxiliary products, the one which did onion juice gargle, etc, and measured the effect on the reduction of oral malodor. The experimental results of the study were as below. 1) After onion juice gargle, in the experimental group A which brushed teeth, it showed lasting decrease of oral malodor until 20min since the experiment, and after 30min, the degree of oral malodor started to increase again. 2) After onion juice gargle, the result of the experimental group B which took only supplementary products such as garglin, chewing gum, intaking green tea with roasted rice & brushing a tongue and so on, was as follows. First, in case of experimental group BG which used garglin, until 30 min has passed since the experiment, it showed the lasting reduction of oral malodor as the same trend with the experimental group BG. Second, in chewing gum (experimental group BC), intaking green tea with roasted rice (experimental group BT), and brushing a tongue (experimental group BO), continuous reduction of oral malodor was shown until 10minutes has passed since the experiment, but, after 20minutes, we could see the degree of oral malodor started to increase again. 3) After onion juice gargle, in the experimental group C which only the degree of oral malodor was measured with the passage of time, neither brushing teeth nor using auxiliary goods, until 30min since the experiment, it showed the similar trend of the reduction of oral malodor with other experimental groups, but, it showed high degree of oral malodor, as compared with other experimental groups A and B.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.161-166
• /
• 2007

Relationship of Dental Health Assessment to the Number of Existing Permanent Tooth in Senior Citizens visited a dental hospital or clinic from Some Regions. The purpose of this study was to examine the relationship of the dental health assessment of elderly people who were at the age of 65 and up to the number of existing permanent tooth in an effort to lay the groundwork for pinpointing problems with their oral status and developing programs geared toward improving their dental health and quality of life. The findings of the study were as follows: 1. Regarding self-perceived dental health, the largest group of the senior citizens that accounted for 57.9 percent didn't find themselves to be in good dental health. The second largest group that represented 32.5 percent thought their dental health was at an ordinary level, and the third greatest number of them that stood at 9.5 percent considered themselves to be in good dental health. Their self-perceived dental health status was statistically significantly different according to education and monthly income, and whether they had a job or not made a statistically significant difference to that as well(p < .01, p < .001). 2. In terms of taste appreciation, 58.7 percent, the largest group, didn't appreciate one or two kinds of taste, and their taste appreciation was statistically significantly different according to education and monthly income(p < .05, p < .01). 3. As for chewing ability, 20.6 percent were able to chew well. In regard to digestion, 69.0 percent had an ordinary level of digestive power. 4. Concerning the number of existing permanent tooth, 38.9 percent, the greatest percentage, had ten or less permanent teeth. By education, the possession of 21or more permanent teeth(40.0%) was most common among those who received high-school or higher education. The greatest group of the senior citizens with a job had 11 to 20 permanent teeth(41.7%), and the largest number of the elderly people whose monthly income was 500 thousand won or more were in possession of 11 to 20 permanent teeth(41.7%). The number of existing permanent tooth statistically significantly differed with their general characteristics(p < .01). 5. As to connections between dental health and the number of existing permanent tooth, 21 permanent teeth or more were owned by those who were in good dental health, who appreciated different tastes and whose chewing ability was good. So there was a statistically significant relationship between the two.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.549-557
• /
• 1997

This study was designed to investigate the attrition pattern in Angle Class III malocclusion with facial asymmetry. The sample consisted of three groups, the 20 subjects of normal occlusion group(Group I), the 12 subjects of class III malocclusion without facial asymmetry group(Group II) and 17 subjects of Class III malocclusion with facial asymmetry group(Group III). Attrition areas from canine to second molar on both sides in upper and lower arch, totally twenty, was marked by pencil and mesured by computer system(INTERGRAPH CO. USA) 2 times and the average value was used for date processing. Attrition areas from canine to second molar on both sides in upper and lower arch, totally twenty, was marked by pencil and mesured by computer system(INTERGRAPH CO. USA) 2 times and the average value was used for date Processing. All attrition areas were measured 2 times and the average value was used for data processing The data were statistically analyzed by SAS program. The results of this study were as follows. 1. Total attrition area in Group I was larger than in Group II and III. 2. There was no significant difference in attrition area between right and left side in each group, but attrition area in Group III was larger than in Group I and II. 3. In Group I, Maxillary attrition area was larger than mandibular attrition area, but in Group ll and III, there was no significant difference in attrition area between maxilla and mandible. 4. In Group III, the attrition area of deviated side was target than undeviated side 5. There was no significant difference in attrition area between chewing side and non-chewing side in each group. 6. The total attrition area was unaffected by gender.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.1
• /
• pp.41-49
• /
• 2016

The objective of this study was to determine the effect of different pregnancy stages on the eating and ruminating behavior of Hanwoo heifers (Bos taurus coreanae). A total of twelve Hanwoo heifers were divided into four groups depending on pregnancy stage: C: before pregnancy, 9 months old, T1: 3 months pregnant, 16 months old, T2: 6 months pregnant, 19 months old, T3: 9 months pregnant, 22 months old (3 replicates per group). Concentrate of 1% of the body weight was fed to them. Roughage was provided at ad libitum to all treatments. Our results revealed that the intake of roughage was the highest in the T3 group (at 3.68 kg) and the lowest in the C group (at 1.02 kg, p<0.05). Total intake in the order from high to low was: T3 > T2 > T1 > C (p<0.05). The rate of dry matter intake compared to body weight (DMI/BW, %) from high to low order was: T3 > T2 > T1 > C (p<0.05). Eating time, ruminating time, and chewing time were the highest in T3 group (p<0.05). Resting time was the highest in C group (p<0.05). The number of bolus and the number of total chews were significantly higher in T3 compared to those in other groups. However, ruminating time per bolus was not significantly difference among groups. The number of chews per bolus from high to low order was: C > T1 > T3 > T2 (p<0.05). The number of bolus per minute was not significantly different among groups. The number of drinking and the number of defecating were significantly higher in C and T1, respectively (p<0.05). However, the number of urinating had no effect according to pregnancy stage. Eating rate and chewing efficiency were significantly higher (p<0.05) in accordance with pregnancy stage (T3 > T2 > T1 > C). Ruminating efficiency was significantly (p<0.05) higher T1 than that in other groups.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.110-117
• /
• 2019

Purpose: This study was to evaluate the wear resistance of 3D printed, milled, and conventionally cured provisional resin materials. Materials and methods: Four types of resin materials made with different methods were examined: Stereolithography apparatus (SLA) 3D printed resin (S3P), digital light processing (DLP) 3D printed resin (D3P), milled resin (MIL), conventionally self-cured resin (CON). In the 3D printed resin specimens, the build orientation and layer thickness were set to $0^{\circ}$ and $100{\mu}m$, respectively. The specimens were tested in a 2-axis chewing simulator with the steatite as the antagonist under thermocycling condition (5 kg, 30,000 cycles, 0.8 Hz, $5^{\circ}C/55^{\circ}C$). Wear losses of the specimens were calculated using CAD software and scanning electron microscope (SEM) was used to investigate wear surface of the specimens. Statistical significance was determined using One-way ANOVA and Dunnett T3 analysis (${\alpha}=.05$). Results: Wear losses of the S3P, D3P, and MIL groups significantly smaller than those of the CON group (P < .05). There was no significant difference among S3P, D3P, and MIL group (P > .05). In the SEM observations, in the S3P and D3P groups, vertical cracks were observed in the sliding direction of the antagonist. In the MIL group, there was an overall uniform wear surface, whereas in the CON group, a distinct wear track and numerous bubbles were observed. Conclusion: Within the limits of this study, provisional resin materials made with 3D printing show adequate wear resistance for applications in dentistry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.607-613
• /
• 2018

The aim of this study is to predict the exact time of parturition from analysis and classification of preliminary behavior based on parturition signals in sows. This study was conducted with 12 crossbred sows (with an average of 3.5 parities). Behavioral characteristics were analyzed for duration and the frequency of different behaviors on a checklist, which includes the duration of the basic behaviors (feeding, standing, lying down, and sitting). The frequency of specific behaviors (investigatory behavior, shame-chewing, scratching, and bar-biting) was also recorded. Image information was collected every two minutes for 24 hours before the first piglets were born. As a result, the basic behavior of a sows' standing time (22.6% of the time after 24 h, 24.9% after 12 h) and time lying down (55.9% after 24 h, 66.3% after 12 h) increased over the 12 h period before parturition, compared with the 24 h period before parturition (p<0.01). Feeding (13.42% after 24 h, 4.38% after 12 h) and sitting (8.2% after 24 h, 4.5% after 12 h) tended to decrease during the 12 h before parturition (p>0.05). The sows' investigatory behavior ($11.44{\pm}1.80$ after 24 h, $55.97{\pm}6.13$ after 12 h), scratching ($3.75{\pm}1.92$ after 24 h, $20.99{\pm}5.81$ after 12 h), and bar-biting ($0.69{\pm}0.15$ after 24 h, $3.71{\pm}1.53$ after 12 h) increased in the 12-hour period before parturition, compared with the 24-hour period before parturition (p<0.01). On the other hand, shame-chewing ($2.20{\pm}1.67$ after 24 h, $0.07{\pm}0.01$ after 12 h) decreased compared to the 12-hour period before parturition (p>0.05). Thus, standing, investigatory behavior, scratching, and bar-biting could be used as behaviors indicative of parturition in sows.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.1067-1078
• /
• 2003

This study was designed to determine the effect of gestation housing and parity on the farrowing performance and behaviour of sows during pregnancy, farrowing and lactation periods. Total 18 Duroc sows were randomly assigned after 4 weeks of gestation to either an individual gestation stall or a groups of three with pen gestation system for three parities(1st, 2nd${\sim}$3rd, and 4th${\sim}$5th). Approximately 7 days before predicted farrowing date, sows were transferred to farrowing crates where they remained until 21 days post-partum. Behaviour was recorded on day 60 and 90 of pregnancy for 24 hours, on day of farrowing for farrowing duration and on day 10 of lactation for 2.5 hours in the farrowing crate. The results obtained from this study were summarized as follows: On 60 and 90 day of pregnancy, all sows in both groups made attempts for ventral lying more than for other postures. Sows in the group gestation pen spent more time on walking than those in individual gestation stall(p<0.01); however, the group housed sows were spent less time on drinking than the individually housed sows(p<0.01). There was no significant difference between gestation housings in the occurrence of stereotypy of pregnant sows. On day 60 of pregnancy, sows in the individual gestation stall showed the highest frequency of vacuum chewing and head weaving. However, floor licking and bar licking behaviours were highest in day 90 pregnant sows individually housed. The sows individually housed during the gestation period spent more time on sitting and eating on the day of farrowing in the farrowing crate than the sows group housed. On day 10 of lactation in the farrowing crate, the group housed sows during the gestation period made significantly more attempts for ventral lying than sows individually housed. In conclusion, the occurrence of stereotypy of sows during the gestation and lactation did not differ between gestation housings and farrowing performance of sows during the gestation period was not affected by gestation housing. Thus, the group housing for pregnant sows is a feasible means to improve welfare of sows and to increase the normal behaviour of sows.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.47-59
• /
• 2016

Purpose: The aim of this study was to investigate the changes in occlusal force after loss of the lower first molar depending on the inclination and extrusion of the adjacent and opposing teeth by using a strain gauge. Materials and Methods: Anatomic teeth were used to reconstruct the normal dental arch with loss of the lower right first molar. A uniformly thick layer of silicone was applied to the root to mimic the periodontal ligament. Four stages of dies with varying degrees of inclination and extrusion of the adjacent and opposing teeth were constructed and attached to master model interchangeably by using a CAD/CAM fabricated customized die system. The strain gauges were attached to teeth and a universal testing machine was used to determine the changes in occlusal force. An independent t-test and one-way ANOVA were performed (${\alpha}=.05$). Results: While simulating chewing food, the upper first, second premolar and lower second molar showed greater occlusal force than before extraction. When the change of adjacent teeth's occlusal force with their progressive movement after molar loss was evaluated, the difference among four die models was significant and was in the decreasing aspect (P < 0.05). Conclusion: When the lower first molar was lost and the adjacent teeth did not move yet, the occlusal force in adjacent teeth was higher than that when the lower first molar still existed. In addition, the occlusal force in the upper premolars and lower second molar decreased significantly with the progressive movement of adjacent teeth.