• Journal of Powder Materials
• /
• v.27 no.2
• /
• pp.164-173
• /
• 2020

Metal matrix composites (MMCs), which are a combination of two or more constituents with different physical or chemical properties, are today receiving great attention in various areas, as they have high specific strength, corrosion resistance, fatigue strength, and good tribological properties. This paper presents a research review on the combination of matrix and reinforced materials, fabrication processes, and application status of metal matrix composites. In this paper, we aim to discuss and review the importance of metal composite materials as advanced materials that can be used in various applications such as transportation, defense, sports, and extreme environments. In addition, the applicability and technology development trends in new process technology fields such as additive manufacturing of metal composites will be described.

• Journal of Institute of Convergence Technology
• /
• v.2 no.2
• /
• pp.25-29
• /
• 2012

Micro machining technologies have been required to satisfy various conditions in a high-technology industry. Micro electrochemical process is one of the most precision machining methods. Micro electrochemical process has been divided into electrochemical etching through protective layer and electrochemical machining using ultrashort voltage pulses. Micro shaft can be fabricated by electrochemical etching. The various protective layers such as photo-resist, oxide layer and oxidized recast layer have been used to protect metal surface during electrochemical etching. Micro patterning on metal surface can be machined by electrochemical etching through protective layer. Micro hole, groove and structures can be easily machined by electrochemical machining using ultrashort voltage pulses. Recently, the groove with subnanometer was machined using AFM.

• Journal of the Speleological Society of Korea
• /
• no.81
• /
• pp.1-5
• /
• 2007

The magnetic polishing is the useful method to finish some machinery fabrications by using magnetic power This method is one of the precision techniques and has an aim for clean technology in the transportation of the pure gas in the clean pipes. The magnetic abrasive polishing method is not so common in the field of machine that it is not known to widely. There are rarely researcher in this feilld because of non-effectiveness of magnetic abrasive. Therefore, in this paper we deals with the development of the magnetic abrasive with the fse of Sr-Ferrite. In this development, abrasive grain A has been made by using the resin bond fabricated at low temperature. And magnetic abrasive powder was fabricated from the Sr-Ferrite which was crushed into 200 mesh. The XRD analysis result shows that only A abrasive and Sr-Ferrite crystal peaks were detected, explaining that resin bond was not any more to contribute chemical reaction. From SEM analysis, we found that A abrasive and Sr-Ferrite were strongly bonding with each other.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.41
• /
• pp.185-202
• /
• 2009

With the rapid development of oil and chemical industry in the late 20C, massive transportation of oil by oil tanker vessel has grown and it caused the big oil pollution accidents. When oil spill from the oil tanker, damages reach into the astronomical figures in economically and damages affect wide area and many people with break the balance of ecosystem. Recently in Korea, the oil pollution accidents has occurred frequently as growing of oil consumption and it caused large-scale damages to the victim. Oil pollution in Korea offshore takes not only Korean fisherman from their life ground and break the ecosystem but it takes too much time and money to recover. To minimize oil pollution damages, it is necessary to make pre-caution effort as a ship owner and relevant government bodies should endeavor to prevent from more damages. But once oil pollution accidents occurs in territorial sea, compensation for victim is very important. But it is true that compensation is not paid to victim smoothly. So this study aims at the problems of oil pollution compensation to the Korean victim and find the best way to get reasonable compensation.

• Journal of the Speleological Society of Korea
• /
• no.70
• /
• pp.45-50
• /
• 2006

The magnetic polishing is the useful method to finish using magnetic power of magnet. This method is one of precision polishing techniques and has an aim of the clean technology using for the pure of gas and inside of the clean pipe for transportation. The magnetic abrasive polishing method is not so common for machine that it is not spreaded widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in this paper deals with development of the magnetic abrasive using worthless mineral. In this development, abrasive grain WA and GC used to resin bond fabricated low temperature. And magnetic material was fabricated from the worthless mineral which were closed into 200 mesh grit type. The XRD analysis result show that only WA and GC abrasive and worthless mineral crystal peaks detected which explains resin bond was not any more chemical reaction. From SEM analysis it is found that WA and GC abrasive and worthless mineral were strong bonding with each other by bond.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.61
• /
• pp.99-104
• /
• 2000

Although the outsourcing of logistics is one of the most widely discussed contemporary topics in the field of business logistics, efforts to organize them in an integrated broad-based body of knowledge have so far been rather limited. In order to develop and implement the outsourcing of logistics effectively and efficiently, this paper presents the procedure for establishment of outsourcing logistics systems. Several case studies including 7 firms from X Group in glass manufacturing industry and 1 firm from Y Group in chemical industry, respectively are introduced to determine the benefits of outsourcing according to some criteria, such as performance evaluation of before-outsourcing and after-outsourcing logistics.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.1
• /
• pp.3-9
• /
• 1990

Expression is on operation of separating liquid from solid liquid mixtures which has long been used on a universal scale in widely divergent fields. In fruit pulps processing and fermentation industries. removal of a portion of the liquid in filler cake is essential to the maximum yields of products. In sewage sludge treatments, dewatering of filter cakes is important to disposal by incineration. transportation. and landfill. In the chemical process industries, drying of wet cakes increases cost, and it is desirable to eliminate as much liquor as possible by non-thermal methods. This paper is mainly concerned with the development of a simplified equation for constant-pressure expression.

• Journal of the KSME
• /
• v.19 no.4
• /
• pp.326-331
• /
• 1979

압력배관에 대한 미국의 국가규준으로는 다음과 같은 것이 있다. Section 1. Power Piping ANSI B31.1 Section 2. Fuol Gas Piping ANSI B31.2 Section 3. Petroleum Refinery Piping ANSI B31.3 Section 4. Liquid Potroleum Transportation Piping ANSI B31.4 5. Section Refrigeration Piping ANSI 31.5 Section 6. Chemical Plant Piping ANSI B31.6 Section 7. Nuclear Power Piping ANSI B31.7 Section 8. Gas Transmission and Distribution Piping Systems ANSI B31.8 이중에서 Power Piping ANSI B31.1은 1977년도에 공진청에서 제정한 "압력배관 기술 기준 (1) "의 기본이 되고 있다. 금반의 냉동배관 기술기준 제정에 있어서도 이것이 압력배관의 범주내에 포함되는 것이기 때문에 기준의 통일성을 기하기 위하여서는 압력 배관기술기준(1)에 준하여 ANSI B31.5 Refrigeration Piping을 기본으로 하여야 할 것으로 고려하였다. 현재 각국의 압력 배관에 대한 기술기준은 그 형식은 여하간에 기본적으로는 ANSI B31. 시리즈에 따르고 있고 또 이 규준이 국제적으로 인정 널리 시행되고 있으므로 본 냉동배관 기술기준도 ANSI B31.5에 따라 제정하는 것이 타당성이 있는 것으로 고려하였다.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.2
• /
• pp.167-172
• /
• 2009

Direct methanol fuel cells(DMFCs) are receiving significant attention in the portable power source and electric vehicular transportation because of its high energy efficiency as liquid fuel, low cost, and no requirement of fuel reforming process. In this study, we synthesized the Sulfonated poly(ether ether ketone) (SPEEK) to evaluate the possibility of use as a proton exchange membrane for DMFC. And poly(vinylidienedifluoride) (PVDF) was used to increase proton conductivity in SPEEK and simultaneously to prevent methanol transport through the cross linked membrane. Furthermore, in order to improve the electrical composite properties for DMFC applications.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.4
• /
• pp.359-365
• /
• 2017

To develop new functional materials, Saccharina japonica (S. japonica) was cultivated with Phellinus linteus (P. linteus) mycelia by solid culture. S. japonica was fermented with P. linteus mycelia. The various radical scavenging activities of extracts of fermented S. japonica with P. linteus mycelia (FSPM) were investigated and compared to the antioxidant capabilities of unfermented S. japonica and P. linteus mycelia. The antioxidant activities of FSPM extracts were evaluated using ferric reducing antioxidant power (FRAP) and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activity. FSPM showed stronger free radical scavenging abilities than P. linteus mycelia or S. japonica alone. These results indicate that fermentation of S. japonica changes its chemical nature and could provide beneficial antioxidant effects.