• Journal of the Korean Vacuum Society
• /
• v.6 no.1
• /
• pp.9-19
• /
• 1997

The reaction mechanisms of dry cleaning with UV-excited chlorine radical for Zn, Fe and Ti trace contaminants on the Si wafer have been studied by SEM, AFM and XPS analyses in this work. The patterned Zn, Fe and Ti films were deposited on the Si wafer surface by thermal evaporation and changes in the surface morphology after dry cleaning with $Cl_2$and UV/$Cl_2$at $200^{\circ}C$ were studied by optical microscopy and SEM. In addition, changes in the surface roughness of Si wafer with the cleaning was observed by AFM. The chemical bonding states of the Zn, Fe and Ti deposited silicon surface were observed with in-line XPS analysis. Zn and Fe were easily cleaned in the form of volatile zinc-chloride and iron-chloride as verified by the surface morphology changes. Ti which forms involatile oxides was not easily removed at room temperature but was slightly removed by UV/$Cl_2$at elevated temperature of $200^{\circ}C$. It was also found that the surface roughness of the Si wafer increased after $Cl_2$and UV/$Cl_2$cleaning. Therefore, the metallic contaminants on the Si wafer can be easily removed at lower temperature without surface damage by a continuous process using wet cleaning followed by UV/$Cl_2$dry cleaning.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.2
• /
• pp.357-364
• /
• 2008

Mylabris is the dried body of the chinese blister beetle. The species used in medicine are Mylabris phalerata and M. cichorii. In recent studies, it has been found that Mylabris possesses antitumor properties, increases the number of leukocytes, and has irritant effects on the urinary organs. The crude extracts of Mylabris have been noted for their highly irritant action and other traditional uses of Mylabris include treatment of poor local blood circulation. The active constituent of Mylabris is cantharidin. The chemical is notable for its vesicant properties, but with severe side effects such as nephrotoxicity. This experiment examined the effect of extracts and fractions, obtained from Mylabris phalerata Pall. on hair growth activity of the C57BL/6N mice after topical application to skin. First, we examined the effect of an extracts, obtained from the alcohol extracts of dried Mylabris phalerata Pall. on hair growth activity of the C57BL/6N mice after topical application to skin. Second, we examined on hair growth activity of the cantharidin fraction of Mylabris phalerata Pall. compared to the control and 1% minoxidil groups. Third, we investigated the number of hair follicle and mast cells after topical application of extracts of Mylabris phalerata Pall. to skin for 16 days. The results were as follows: Hair growth effect from the extracts of Mylabris phalerata Pall.(0.312%) was observed in 80% of mice whose hair had been removed in 13 days. Hair growth effect from the extract of Mylabris phalerata Pall.(0.312 and 0.625%) and 1% minoxidil group was observed in 100% of mice whose hair had been clipped in 20 days. Hair growth effect from the cantharidin fraction(0.5%) and water fraction(0.5%) of Mylabris phalerata Pall. was observed in 100% of mice whose hair had been clipped in 24 days. The hair growth effect on the cantharidin fraction(0.125%) was observed to be strong compared with the minoxidil(3%) group, commercial hair growth agents, in mice whose hair had been clipped in 19 days. In the spontaneous alopecia mice model, the hair growth effect from the cantharidin fraction (0.125%) was observed to be strong as compared with the states before the 13 days experiment. These experiments suggest that extracts and fractions of Mylabris phalerata Pall. may stimulate the topical hair growth activity in low doses.

• Korean Journal of Materials Research
• /
• v.22 no.8
• /
• pp.439-444
• /
• 2012

To compare the photocatalytic performances of titania for purification of waste water according to applied voltages and doping, $TiO_2$ films were prepared in a 1.0 M $H_2SO_4$ solution containing $NH_4F$ at different anodic voltages. Chemical bonding states of F-N-codoped $TiO_2$ were analyzed using surface X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of the co-doped $TiO_2$ films was analyzed by the degradation of aniline blue solution. Nanotubes were formed with thicknesses of 200-300 nm for the films anodized at 30 V, but porous morphology was generated with pores of 1-2 ${\mu}m$ for the $TiO_2$ anodized at 180 V. The phenomenon of spark discharge was initiated at about 98 V due to the breakdown of the oxide films in both solutions. XPS analysis revealed the spectra of F1s at 684.3 eV and N1s at 399.8 eV for the $TiO_2$ anodized in the $H_2SO_4-NH_4F$ solution at 180 V, suggesting the incorporation of F and N species during anodization. Dye removal rates for the pure $TiO_2$ anodized at 30 V and 180 V were found to be 14.0% and 38.9%, respectively, in the photocatalytic degradation test of the aniline blue solution for 200 min irradiation; the rates for the F-N-codoped $TiO_2$ anodized at 30 V and 180 V were found to be 21.2% and 65.6%, respectively. From the results of diffuse reflectance absorption spectroscopy (DRS), it was found that the absorption edge of the F-N-codoped $TiO_2$ films shifted toward the visible light region up to 412 nm, indicating that the photocatalytic activity of $TiO_2$ is improved by appropriate doping of F and N by the addition of $NH_4F$.

• Economic and Environmental Geology
• /
• v.26 no.1
• /
• pp.41-54
• /
• 1993

The Ulsan Fe-W deposit, which can be classified as a calcareous skarn deposit, is represented by ore pipe consisting principally of magnetite and lesser amounts of scheelite with minor sulphides, sulphosaits, arsenides, sulpharsenides, etc. At Ulsan mine, metasomatic processes of skarn growth may be divided broadly into two stages based on the paragenetic sequence of calc-silicate minerals and their chemical composition; early and late skarn stages. Early stage has started with the formation of highly calcic assemblages of wollastonite, diopsidic clinopyroxene and nearly pure grossular, which are followed by the formation of clinopyroxenes with salite to ferrosalite composition and grandite garnets with intermediate composition. Based on these calc-silicate assemblages, the temperatures of early skarn formations have been in the ranges of $550^{\circ}$ to $450^{\circ}$. The calc-silicate assemblages formed during the earlier half period of late skarn stage show the enrichment of notable iron and slight manganese, and the depletion of magnesium; clinopyroxenes are hedenbergitic, and grandite garnets are andraditic. The formation temperatures during this skarn stage are inferred to have been in the range of $430^{\circ}$ to $470^{\circ}C$ at low $X_{CO_2}$ by data from fluid inclusions of late andraditic garnets. The later half period of late skarn stage is characterized by the hydrous alteration of pre-existing minerals and the formation of hydrous silicates. The main iron-tungsten mineralization representing prominent deposition of magnetite immediately followed by minor scheelite impregnation has taken place at the middle of early skarn stage, while complex polymetallic mineralization has proceeded during and after the late skarn stage. Various metals and semimetals of Fe, Ni, Co, Cu, Zn, As, Mo, Ag, In, Sn, Sb, Te, Pb and Bi have been in various states such as native metal, sulphides, arsenides, sulphosaits, sulpharsenides and tellurides.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.42-47
• /
• 2015

While the oxygen content of gasoline for automobiles in Korea is regulated to less than 2.3 weight %, European and World-Wide Fuel Charter (WWFC) regulate it to less than 2.7 weight %. The oxygen content of oxygen-containing materials increases the octane number of the fuel due to the secondary combustion in the internal combustion engine. It has been reported to be effective in reducing emissions, such as CO, HC, which is caused by incomplete combustion. Before 2000s in the United States and Europe, there has been many researches about vehicle application of the changes in oxygen content of gasoline. However, there are not many domestic researches which reflect the improvement of the fuel quality and automotive technology. In this study, fuels of three different oxygen contents were applied to GDI and MPI engines. As a result, the changes of fuel consumption and emission gas were very similar depends of the oxygen content changes. The PN in GDI engine was decreased as the oxygen content was increased.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.3-12
• /
• 2009

Soil is one of the Earth's most important resources. There are many differences among the soils of plains.like and hilly terrains, and therefore, accurate and comprehensive information on soil is essential for optimum and sustainable soil utilization. However, information on the soil of the hilly terrains of the Eastern Ghats of Tamil Nadu, India, is limited or absent. In the present study, Kolli hill, one among the hills of the Eastern Ghats, was soil.inventoried and mapped using a ground survey and remote sensing. Soil samples were collected and their physico.chemical properties analyzed according to the United States Department of Agriculture (USDA) standards. The soils were classified up to the family level. As a result of this study, 30 soil series belonging to ten sub.groups of five great groups and three sub.orders and orders each, were identified (classified to the family level) and mapped. Entisols, Inseptisols and Alfisols were the three orders, among which Entisols was the major one, occupying 75% of the area. Among the five great groups, Ustorthents occupied majority of the area (73%). Lithic Ustorthents and Typic Ustorthents were the two major sub.groups, occupying 40% and 26% of the total area, respectively. The present soil resource mapping of the Eastern Ghats of Tamil Nadu is a pioneer study, which yielded valuable information on the soil in this region.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.27-33
• /
• 2009

In this study, it was analysed physical characteristics, TS, moisture, C/N ratio, leaching test, and element analysis in landfill wastes of 10 years old without landfill pretreatment. The Organic material content was 7.2%~23.5% and soil was the main inorganic materials which it's rate was 54.1%~71.0%, in landfill wastes. The results of TS, VS, and moisture were represented 51.5%~68.1%, 23.6%~56.1%, 32.0%~48.4%, respectively. The analysis of hazardous materials did not indicate Hg, $Cr^{+6}$, CN, Organic Phosphorus, TCE and PCE, however the Pb of leaching materials showed 0.023~0.092 mg/L, which was the highest. As the result of the element analysis, C was 47.74%~56.72%, N was 4.09%~9.92%, the C/N ratio was 5.76~12.57 and the result of soils around landfill was the highest heavy material, Pb, 2.465 mg/kg~10.251 mg/kg. The objectives of this paper are to investigate states, stabilization of these closed landfills and to gain suitable data for post-closure care using some parameters through analysis of landfill environment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.169-169
• /
• 2008

To keep pace with scaling trends of CMOS technologies, high-k metal oxides are to be introduced. Due to their high permittivity, high-k materials can achieve the required capacitance with stacks of higher physical thickness to reduce the leakage current through the scaled gate oxide, which make it become much more promising materials to instead of $SiO_2$. As further studying on high-k, an understanding of the relation between the etch characteristics of high-k dielectric materials and plasma properties is required for the low damaged removal process to match standard processing procedure. There are some reports on the dry etching of different high-k materials in ICP and ECR plasma with various plasma parameters, such as different gas combinations ($Cl_2$, $Cl_2/BCl_3$, $Cl_2$/Ar, $SF_6$/Ar, and $CH_4/H_2$/Ar etc). Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. The choice of $BCl_3$ as the chemically active gas results from the fact that it is widely used for the etching o the materials covered by the native oxides due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. In this study, the surface reactions and the etch rate of $Al_2O_3$ films in $BCl_3/Cl_2$/Ar plasma were investigated in an inductively coupled plasma(ICP) reactor in terms of the gas mixing ratio, RF power, DC bias and chamber pressure. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by AFM and SEM. The chemical states of film was investigated using X-ray photoelectron spectroscopy (XPS), which confirmed the existence of nonvolatile etch byproducts.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.39-42
• /
• 2008

[ $AB_2X_4$ ](A, B=Transition Metal, X=O, S, Se) are cubic spinel normal ferrimagnets, in which M ions occupy the tetrahedral sites and Cr ions occupy the octahedral sites. Recently, they have been investigated for behaviour of B site ions and A-B interaction. Polycrystalline $[Co_{0.9}Zn_{0.1}]_A[Cr_{1.98}{^{57}Fe_{0.02}}]_BO_4$ compound was prepared by wet-chemical process. The ferrimagnetic transition was observed around 90K. $M\"{o}ssbauer$ absorption spectra at 4.2K show that the well-developed two sextets are superposed with small difference in hyperfine fields($H_{hf}$). The hyperfine fields of $CoCr_{1.98}{^{57}Fe_{0.02}}O_4$ and $Co_{0.9}Zn_{0.1}Cr_{1.98}{^{57}Fe_{0.02}}O_4$ were determined to be 488, 478 kOe and 486, 468 kOe, respectively. We notice that the one of the magnetic hyperfine field values changes with Zn ion substitution. These results suggest the incommensurate states and spin-reorientation temperature($T_S=18K$) changes with Zn ions substitution below spin-reorientation temperature($T_S=28K$) of $CoCr_{1.98}{^{57}Fe_{0.02}}O_4$

• Journal of The Korean Society of Clinical Toxicology
• /
• v.2 no.1
• /
• pp.41-44
• /
• 2004

With a recent well-being boom, our interest in chemical-free vegetables is also increasing. So, some people are trying to take in wild plants chosen by themselves. However, others often come to their rescue in an emergency department after eating them, caused by their misunderstanding poisonous herbs as edible vegetables. We have ever seen two persons carried into the emergency department with bradycardia and shock incurred by his intake by confusion between Caltha palustris and Ligularia fischeri lately. There were symptoms such as epigastric pain, nausea, vomiting and so on in their cases, and the symptoms of bradycardia and hypotension continued. Owing to sustained bradycardia and hypotension states, we applied a dopamine to a patient, and then the in-patient left the hospital two days later. We presumed the cause of the two symptoms appeared in two cases to be a saponin in Caltha palustris. For that reason, if someone has the bradycardia and hypotension symptoms from an unknown cause after taking in wild plants, they have to consider a toxication by the Caltha palustris. Therefore, this paper focused on the issue that unexpected poisoning would have to be prevented by studying about wild plants much more and informing the toxic risk from the plants.