• 제목/요약/키워드: chemical speciation

검색결과 108건 처리시간 0.032초

해수 중 용존 아연의 화학적 존재 형태 연구 동향 (Review of Chemical Speciation of Dissolved Zinc in Seawater)

  • 김태진
    • 한국해양학회지:바다
    • /
    • 제25권3호
    • /
    • pp.67-80
    • /
    • 2020
  • 해양 환경에서 용존 미량금속 원소 중 하나인 아연(Zn)은 식물플랑크톤의 성장에 필수적인 미량영양염으로 알려져 있다. 외양 표층에서 대부분의 용존 아연은 용존 유기배위자와 강하게 결합하여 아연-유기착화합물을 형성하게 되고 이로 인해 생물 가용한 자유이온 형태의 아연(Zn2+)의 농도는 총 아연 농도의 5% 이내로 존재하게 된다. 이 논문에서는 아연의 화학적 존재 형태에 대한 개념과 측정 방법에 대해 간단히 소개하고, 주요 연구 사례를 통하여 미량금속의 화학 종조성이 해양 생지화학에 미치는 영향 및 의미, 아연-유기착화합물이 아연의 생물가용성에 미치는 영향, 아연과 결합하여 유기착화합물을 형성하는 용존 유기배위자의 기원에 대해 기술하였다.

가수분해 산물 분포를 이용한 급속혼화강도가 화학적 인 제거 효율에 미치는 영향의 규명 (Evaluation of effect of rapid mixing intensity on chemical phosphorus removal using Al hydrolysis speciation)

  • 김승현;윤동수;문병현
    • 상하수도학회지
    • /
    • 제25권3호
    • /
    • pp.367-373
    • /
    • 2011
  • Mechanism of rapid mixing effect on chemical phosphorus removal is evaluated in this study. Assuming that chemical phosphorus removal is unaffected by mixing time, only rapid mixing intensity is evaluated. In order to find out the mechanism, it is hypothesized that rapid mixing affects the Al hydrolysis speciation, and that formation of more monomeric species ($Al^a$) results in better removal of phosphorus. According to a ferron assay, more $Al^a$ formed at higher mixing intensity than at lower intensity. Subsequent experiments revealed that better phosphorus removal was obtained at higher intensity than at lower intensity, in terms of the molar ratio of $Al_{added}/P_{removed}$. The proposed hypothesis was proved in this study. Chemical phosphorus removal is affected by rapid mixing intensity due to its effect on the Al hydrolysis speciation.

HPLC-ICPMS를 이용한 셀레늄 화학종의 연구에서 화학적 및 광화학적 수소화물 발생법의 비교 (Comparison of chemical and photochemical generation of hydrides in Se speciation study with HPLC-HG-ICPMS)

  • 지하나;박용남
    • 분석과학
    • /
    • 제25권6호
    • /
    • pp.339-344
    • /
    • 2012
  • In this research, hydride generation in HPLC-ICPMS for the selenium speciation was investigated. Chemical and photochemical vapor generation techniques were compared for the effective generation of selenium vapour. $HBr/KBrO_3$ was used for the chemical reduction and a UV lamp was used for the photochemical reduction. It was found out that the photochemical reduction was more effective than the chemical reduction in all of selenium species studied. The optimum conditions for the generation of vapour are 0.4% KI, 2.5% $NaBH_4$, and 1.0 M HCl. The enhancement factor using a photochemical hydride generation was from 6.3 to 16.7 times for inorganic and organic selenium species.

수도권 지역에서 기상-대기질 모델링을 위한 VOC와 PM2.5의 화학종 분류 및 시간분배계수 산정 (Estimation of Chemical Speciation and Temporal Allocation Factor of VOC and PM2.5 for the Weather-Air Quality Modeling in the Seoul Metropolitan Area)

  • 문윤섭
    • 한국지구과학회지
    • /
    • 제36권1호
    • /
    • pp.36-50
    • /
    • 2015
  • 본 연구의 목적은 휘발성 유기화합물(VOC)과 먼지(PM)의 배출원 프로파일로부터 화학종 분류를 할당하고, 성김 행렬 조작자 핵심 배출량 시스템(SMOKE) 내에 배출원 분류코드에 따른 배출원 프로파일의 화학종 분류와 시간분배계수를 수정하는 것이다. 기솔린, 디젤 증기, 도장, 세탁, LPG 등과 같은 VOC 배출원 프로파일로부터 화학 종 분류는 탄소 결합 IV (CBIV) 화학 메커니즘과 주 규모 대기오염연구센터 99 (SAPRC99) 화학 메커니즘을 위해 각각 12종과 34종을 포함한다. 또한 토양, 도로먼지, 가솔린, 디젤차, 산업기원, 도시 소각장, 탄 연소 발전소, 생체 연소, 해안 등과 같은 PM2.5 배출원 프로파일로부터 화학종 분류는 미세 먼지, 유기탄소, 원소 탄소, 질산염과 황산염의 5종으로 할당하였다. 게다가 점 및 선 배출원의 시간 프로파일은 2007년 수도권 지역에서의 굴뚝 원격감시시스템(TMS)과 시간별 교통 흐름 자료로부터 구하였다. 특별히 점 배출원에 있어 오존 모델링을 위한 시간분배계수는 굴뚝 원격감시시스템 자료의 $NO_X$ 배출량 인벤토리에 근거하여 추정하였다.

Speciation of Cr(III)/Cr(VI) in Tannery Waste Waters by Using Ion-Exchange Resins

  • Kartal, S.;Tokalloglu, S.;Ozkan, B.
    • Bulletin of the Korean Chemical Society
    • /
    • 제27권5호
    • /
    • pp.694-698
    • /
    • 2006
  • A method has been described for the chemical speciation, preconcentration and determination of Cr(III) and Cr(VI) species in filtered tannery waste waters by flame atomic absorption spectrometry using ion-exchange resins. Amberlite IR-120($H^+$) strongly acidic cation exchanger and Amberlite IRA-410($CI ^-$) strongly basic anion exchanger resins were used for the separation and preconcentration of Cr(III) and Cr(VI) species, respectively. Optimum condition for preconcentration and speciation was obtained by testing pH of sample and eluent, flow rates of sample and eluent, amount of resins, volume of sample and eluents, and effect of foreign ions. The recommended method has been successfully applied for the preconcentration and determination of chromium species in the dissolved phase of waste water samples collected from a tannery waste water treatment plant in Kayseri, Turkey. The detection limits achieved were 0.73 $\mu$g/L for Cr(III) and 0.81 $\mu$g/L for Cr(VI). Recovery studies showed 99% for Cr(III) and 98% for Cr(VI), for samples spiked with single species.

SMOKE 모델의 입력 모듈 변경에 따른 영향 분석 (Assessment of Changed Input Modules with SMOKE Model)

  • 김지영;김정수;홍지형;정동일;반수진;이용미
    • 한국대기환경학회지
    • /
    • 제24권3호
    • /
    • pp.284-299
    • /
    • 2008
  • Emission input modules was developed to produce emission input data and change some profiles for Sparse Matrix Operator Kernel Emissions (SMOKE) using Clean Air Policy Support System (CAPSS)'s activities and previous studies. Specially, this study was focused to improve chemical speciation and temporal allocation profiles of SMOKE. At first, SCC cord mapping was done. 579 SCC cords of CAPSS were matched with EPA's one. Temporal allocation profiles were changed using CAPSS monthly activities. And Chemical speciation profiles were substituted using Kang et al. (2000) and Lee et al. (2005) studies and Kim et al. (2005) study. Simulation in Seoul Metropolitan Area (Seoul, Incheon, Gyeonggi) using MM5, SMOKE and CMAQ modeling system was done for effect analysis of changed input modules of SMOKE. Emission model results adjusted with new input modules were slightly changed as compared to using EPA's default modules. SMOKE outputs shows that aldehyde emissions were decreased 4.78% after changing chemical profiles, increased 0.85% after implementing new temporal profiles. Toluene emissions were decreased 18.56% by changing chemical speciation profiles, increased 0.67% by replacing temporal profiles as well. Simulated results of air quality were also slightly elevated by using new input modules. Continuous accumulation of domestic data and studies to develop input system for air quality modeling would produce more improved results of air quality prediction.

Chemical Speciation of Trace Metals in Natural Water by Ultrafiltration/Size Exclusion Chromatography/UV Absorption/ICP-MS

  • Haraguchi, Hiroki;Itoh, Akihide;Kimata, Chisen
    • 분석과학
    • /
    • 제8권4호
    • /
    • pp.405-410
    • /
    • 1995
  • A study on elemental speciation of trace metals in lake water (Lake Biwa in Japan) has been carried out by a size exclusion chromatography (SEC) / inductively coupled plasma mass spectrometry (ICP-MS) system. Before analysis, the water sample was preconcentrated with a ultrafiltration technique, where the large molecules with molecular weight larger than 10,000 were concentrated. Then the preconcentrated water samples (500-1000 fold) were analyzed by a SEC/ICP-MS system. Most trace metals were found at the UV absorption peaks corresponding to the molecular weights of ca. 300,000 and 10,000-50,000, where trace metals were on-line detected by ICP-MS. The results suggest that many of trace metals exist as the large organic molecules-metal complexes in natural water.

  • PDF

Ultra-trace Arsenic Determination in Urine and Whole Blood Samples by Flow Injection-Hydride Generation Atomic Absorption Spectrometry after Preconcentration and Speciation Based on Dispersive Liquid-Liquid Microextraction

  • Shirkhanloo, Hamid;Rouhollahi, Ahmad;Mousavi, Hassan Zavvar
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권11호
    • /
    • pp.3923-3927
    • /
    • 2011
  • A noble method for pre-concentration and speciation of ultra trace As (III) and As (V) in urine and whole blood samples based on dispersive liquid-liquid microextraction (DLLME) has been developed. In this method, As (III) was complexed with ammonium pyrrolidine dithiocarbamate at pH = 4 and Then, As (III) was extracted into the ionic liquid (IL). Finally, As (III) was back-extracted from the IL with hydrochloric acid (HCl) and its concentration was determined by flow injection coupled with hydride generation atomic absorption spectrometry (FI-HGAAS). Total amount of arsenic was determined by reducing As (V) to As (III) with potassium iodide (KI) and ascorbic acid in HCl solution and then, As (V) was calculated by the subtracting the total arsenic and As (III) content. Under the optimum conditions, for 5-15 mL of blood and urine samples, the detection limit ($3{\sigma}$) and linear range were achieved 5 ng $L^{-1}$ and 0.02-10 ${\mu}g\;L^{-1}$, respectively. The method was applied successfully to the speciation and determination of As (III) and As (V) in biological samples of multiple sclerosis patients with suitable precision results (RSD < 5%). Validation of the methodology was performed by the standard reference material (CRM).