• Elastomers and Composites
• /
• 제25권2호
• /
• pp.112-116
• /
• 1990

In this study, as one way of developing the new cross-linking method that is curable in water, kinetic analysis of solution reaction between CR and silane coupling agents was attemped. First, CR was reacted with silane coupling agents in solution state. According to the time, reaction quantity was pursued by gas chromatography. Also, reaction rate coefficient and activation energy were calculated from the reaction quantity. Silane coupling agents which were used in this study were MPS, CPS and VES.

• 한국재료학회지
• /
• 제13권3호
• /
• pp.180-184
• /
• 2003

Ce-doped $Y_2$SiO$_{5}$ phosphor particles of spherical morphology, fine size, high crystallinity and high photoluminescence (PL) intensity were prepared by spray pyrolysis. When nitrate precursor solution is adopted, hollow particles were formed by uneven drying rate between surface and inside of droplet. Citric acid and ethylene glycol were introduced as polymeric precursor to control the morphology of particles. When polymeric solution is adopted, polymeric chain is formed by the esterification reaction between carboxyl and hydroxy groups of citric acid and ethylene glycol, and considered as controlling the drying characteristics of droplet. $Y_2$$SiO_{5}$ :Ce phosphor particles prepared from polymeric precursor solution were spherical, filled, fine size and not agglomerate before and after post heat treatment. The optimum doping concentration of cerium was 0.5 mol% of overall solution concentration. The optimum amount of TBOS of high PL intensity and pure crystallinity of X2-type $Y_2$$SiO _{5}$ was 105% of stoichiometric amount. The PL intensity of $Y_2$X$/_{5}$ :Ce phosphor particles prepared using the polymeric precursor solution was 164% of that of the nitrate precursor solution due to homogeneous composition and good morphology.y.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2001년도 Australian-Korean Rheology Conference 2001
• /
• pp.165.4-165
• /
• 2001

• 대한화학회지
• /
• 제13권3호
• /
• pp.209-214
• /
• 1969

The experiment have been carried out for the determination of aggregation state of isopolytantalate anion in aqueous solution by using "Ultracentrifuge Method". The molecular weight of this anion at pH 10.7 could be determined as a heptatantalate anion $Ta_7O_{22}^{9-}$.

• 대한화학회지
• /
• 제9권3호
• /
• pp.124-127
• /
• 1965

The surface tension of the solution of dodecylpridinium bromide was measured by the ring method over the range $25^{\circ}\; to\; 45^{\circ}C.$ The critical micelle concentration was determined from the change of the surface tension of solution with concentration. The temperature dependence of the critical micelle concentration was also investigated. The result was compared with Adderson and Taylor's data determined by the conductivity method.

• 한국자기공명학회논문지
• /
• 제1권1호
• /
• pp.1-6
• /
• 1997

Several dioxovanadate (V) complexes are synthesized and studied by solution and solid-state 51V NMR spectroscopy. In the results, large 51V chemical shift anisotropy ({{{{ DELTA delta }}a = -800 ∼720 ppm) and quadrupole coupling (e2q /h = 7.50 ∼ 9.16 MHz) were observed in the solid-state complexes. The isotropic chemical shifts of the solid samples are very close to the values obtained from solution measurements.

• Bulletin of the Korean Chemical Society
• /
• 제8권5호
• /
• pp.414-418
• /
• 1987

Electrochemical reduction of dibenzoylmethane was studied on mercury electrode by means of cyclic voltammetry, polarography and potentiostatic measurements in ethanol-water system. In acidic solutions monomeric pinacol was produced by irreversible two-electron process while monomeric and dimeric pinacol were competitively produced by the same process in neutral solution. However, in basic solution the dimeric pinacol was mostly produced through radical by irreversible one-electron transfer process. Mechanisms of the reduction of dibenzoylmethane are deduced from Tafel slope, pH dependance and reaction order with respect to the concentration of dibenzoylmethane in the solution of various pH.

• Bulletin of the Korean Chemical Society
• /
• 제17권8호
• /
• pp.682-685
• /
• 1996

Photothermal properties depend on the characteristics of energy transfer processes in solution. In this study, a time-resolved single beam thermal lens experiment in various solvents is employed to investigate the energy coupling effects which govern the energy transfer processes. Interestingly, it is observed that the behaviour of the photothermal propagation in solution depends on the property of solution and the concentration of solute in a single beam thermal lens configuration. These characteristics lead us to consider the solute-solvent coupling effects as well as the solvent-solvent interactions.

• Korean Chemical Engineering Research
• /
• 제52권6호
• /
• pp.775-780
• /
• 2014

Micellar enhanced ultrafiltration (MEUF) was used to remove cadmium from an aqueous solution using sodium dodecyl sulfate (SDS) as a surfactant. Operational parameters such as initial permeate flux, retentate pressure, initial cadmium concentration, pH solution, molecular weight cut-off (MWCO), and molar ratio of cadmium to SDS were investigated. Removal efficiency of cadmium from an aqueous solution increased with an increase of retentate pressure, pH solution and molar ratio of cadmium to SDS, and decreased with an increase of initial permeate flux. Higher removal efficiency of cadmium from the aqueous solution was achieved using lower MWCO (smaller membrane pore size). Under optimized experimental condition, cadmium removal efficiency reached 74.6 % within an hour. Using MEUF-ACF hybrid process the removal efficiency of both cadmium and SDS was found to be over 90%.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.27-29
• /
• 2003

Solution-based MOD-TFA deposition technology of YBCO layers offers a route to low-cost YBCO coated conductors. Since the structures and properties of grown thin film by MOD process are strongly influenced by chemistry of precursor solution, the chemical modification of precursor solution for MOD process are important for improvement of the electrical properties of YBCO films. In this study, the precursor solution for MOD process are modified by chemical additives and solvents. The microstructure and texture of YBCO films grown by chemically modified precursor solution were characterized with SEM/EDS, XRD.