• Computers and Concrete
• /
• 제8권6호
• /
• pp.617-629
• /
• 2011

In this investigation, reservoir sediment and municipal sewage sludge were sintered to form the artificial lightweight aggregates. The sintered aggregates were compared with the commercialized lightweight aggregates to in terms of potential alkali-silica reactivity and chemical stability based on analyses of their physical and chemical properties, leaching of heavy metal, alkali-silica reactivity, crystal phase species and microstructure. Experimental results demonstrated that the degree of sintering of an aggregate affected the chemical resistance more strongly than did its chemical composition. According to ASTM C289-94, all potential alkali-silica reactivity of artificial lightweight aggregates were in the harmless zone, while the potential reactivity of artificial lightweight aggregates made from reservoir sediment and municipal sewage sludge were much lower than those of traditional lightweight aggregates.

• Bulletin of the Korean Chemical Society
• /
• 제15권10호
• /
• pp.860-864
• /
• 1994

2nd-order rate constants have been measured spectrophotometrically for the reactions of 4-nitrophenyl benzoate (1), S-4-nitrophenyl thiobenzoate (2) and 4-nitrophenyl thionbenzoate (3) with alkoxides, aryloxides and thioaryloxides in absolute ethanol at 25.0 ${\pm}0.1$${\circ}C$. The substitution of O by polarizable S in the leaving group has little affected the reactivity of 2 toward the charge localized species (eg. $EtO^-$ and $CF_3CH_2O^-$), while the effect of the similar replacement in the carbonyl group has led to a decrease in reactivity by a factor of 10. However, the reactivity of these esters toward charge delocalized aryloxides has been found to be in the order $1<3{\le}2$. The effect of replaced sulfur atom on reactivity becomes more significant for the reaction with polarizable thioaryloxides, i.e. the reactivity increases in the order $1<2{\ll}3$. The difference in reactivity for the present system is attributed to a polarizability effect.

• 한국가스학회지
• /
• 제20권4호
• /
• pp.15-24
• /
• 2016

반도체 산업에서 많은 종류의 화학물질 사용으로 인한 독성물질 누출과 화학물질간의 혼화에 따른 화재 폭발 등에 의한 화학사고의 위험성이 증가하고 있다. 화학물질의 혼화에 따른 반응성을 평가하는데 실험적 방법이 가장 신뢰성 있지만, 모든 화학물질을 실험을 통하여 평가하는 것은 시간적, 비용적인 제한이 있다. 본 연구에서는 반도체 산업에서 주로 사용되는 공정가스의 위험성 추정하기 위해 미국 NOAA(National Oceanic and Atmospheric Administration)과 EPA에서 개발한 CRW(Chemical Reactivity Worksheet) 3.0 프로그램을 사용하여 공정가스의 반응성을 고찰하였다. 이들 연구 결과는 반도체산업의 공정가스의 혼화성에 따른 반응성 정보와 저장캐비닛의 가스 실린더 보관에 관한 KOSHA 기술지침 작성에 필요한 기초자료를 제시하고자 하였다.

• 대한화학회지
• /
• 제6권1호
• /
• pp.47-53
• /
• 1962

The "reactivity" of coal is one of the important characteristics of a coal used as a process raw material as well as a fuel. In this study, the reactivity was measured in terms of the magnitude of the reaction rate constant in the reduction of carbon dioxide with coal. A reactivity-testing apparatus was designed and constructed, and its performance characteristics were investigated by using Korean anthracite and hard-wood charcoal. Experiments were carried out at temperatures ranging from 750 to 1100$^{\circ}C$ with pulverized Korean anthracite whose sizes range from 1 to 10mm in diameter. Results showed that the reaction rate constant was not appreciably affected by the particle size investigated, and the reactivities of the anthracite and the charcoal were found to be a function of reaction temperature alone. It was also found that a straight line was produced when the logarithm of the rate constant is plotted against the reciprocal of the absolute temperature. The reactivities of the charcoal were found to be 2 to 10 times higher than those of the anthracite at a temperature ranging from 750 to 1100$^{\circ}C$, and 90% of carbon dioxide was reduced to carbon monoxide by the anthracite at a temperature above 1050$^{\circ}C$.

• 한국재료학회지
• /
• 제31권10호
• /
• pp.569-575
• /
• 2021

The reactivity evaluation of copper is performed using ethylenediamine, aminoethanol, and piperidine to apply organic chelators to copper etching. It is revealed that piperidine, which is a ring-type chelator, has the lowest reactivity on copper and copper oxide and ethylenediamine, which is a chain-type chelator, has the highest reactivity via inductively coupled plasma-mass spectroscopy (ICP-MS). Furthermore, it is confirmed that the stable complex of copper-ethylenediamine can be formed during the reaction between copper and ethylenediamine using nuclear magnetic resonance (NMR) and radio-thin layer chromatography. As a final evaluation, the copper reactivity is evaluated by wet etching using each solution. Scanning electron micrographs reveal that the degree of copper reaction in ethylenediamine is stronger than that in any other chelator. This result is in good agreement with the evaluation results obtained by ICP-MS and NMR. It is concluded that ethylenediamine is a prospective etch gas for the dry etching of the copper.

• Bulletin of the Korean Chemical Society
• /
• 제10권3호
• /
• pp.223-226
• /
• 1989

The chemical reactivity of 5,7-dimethoxycoumarine with adenosine has been calculated by the frontier electron and PPP-Cl MO methods. Results suggest that the major reactivity of the 5,7-dimethoxycoumarin is highest at the carbon-4 (position 4), whereas the electrophilic reactivity is generally spread all over the 5,7-dimethoxycoumarin molecule. These results are consistent with the experimental photoaddition reaction products. The small change of bond orders on excitation does not give enough reactivity to triplet states or the efficient intersystem crossing from $T_1\;to\;S_0$ inhibits photoaddition of 5,7-dimethoxycoumarine to adenosine. Although the relative intensity of the singlet band appears to be considerably higher than the triplet band intensity, its integrated intensity, i.e. oscillator strength, is comparable to that of the 5,7-dimethoxycoumarin and adenosine bands.

• Bulletin of the Korean Chemical Society
• /
• 제12권1호
• /
• pp.93-97
• /
• 1991

Rate constants have been measured spectrophotometrically for the reactions of alkali metal ethoxides with 4-nitrophenyl benzoate, S-4-nitrophenyl thiobenzoate and 4-nitrophenyl thionbenzoate in ethanol at 25$^{\circ}$C. Substitution of S for O in the leaving group has not affected reactivity significantly, while the effect of the similar replacement in the acyl group has led to rate decrease by a factor of 10, although pronounced rate enhancements have been expected for both systems. The replacement of O by a polarizable S has also influenced the reactivity of the esters toward alkali metal ethoxides, i.e. the reactivity decreases as the size of the metal ion decreases. The alkali metal ions have showed inhibition effect instead of catalytic effect which would have been expected for the present system. The effect of replaced sulfur atom on the reactivity for the present system is attributed to the nature of hard and soft acids and bases.

• Bulletin of the Korean Chemical Society
• /
• 제12권4호
• /
• pp.406-410
• /
• 1991

Second order rate constants have been measured spectrophotometrically for reactions of 4-nitrophenyl substituted benzoates with various aryloxides and aryl benzoates with p-chlorophenoxide. The reactivity has exhibited significant dependences on the electronic nature of the substituent in the acyl moiety of the substrate and in the nucleophilic phenoxide, while the substituent in the leaving phenoxide has little influenced the reactivity. The Bronsted coefficient $\beta$ values so obtiained support that the present acyl transfer reaction proceeds via a stepwise mechanism in which the nucleophilic attack would be the rate-determining step. Interestingly, the magnitude of the $\betaacyl$ and $\beta$ nuc increases with increasing reactivity, implying that the reactivity selectivity principle is not operative in the present system. The failure of the reactivity selectivity principle is attributed to a change in transition state structure upon the substituent variation in the present acyl transfer reaction.

• Bulletin of the Korean Chemical Society
• /
• 제12권5호
• /
• pp.560-564
• /
• 1991

The gas-phase pyrolysis reactions of iminoethers (Ⅱ), 2-alkoxypyridines (Ⅲ), 2-N-alkylated pyridones (Ⅳ) and N-alkylated acetamides (Ⅴ) have been studied MO theoretically with the AM1 method. The decomposition of these compounds proceeds by a concerted retro-ene process through a six-membered cyclic transition state. The reactivity decreases in the order (Ⅱ) > (Ⅲ) > (Ⅳ) > (Ⅴ), with a greater reactivity for the imine series, (Ⅱ) and (Ⅲ), compared to the amide series, (Ⅳ) and (Ⅴ), and a difference in basicity between the N and O atoms. Within a given series, however, the reactivity is dictated mainly by the aromaticity in the transition state. The reactivity order with respect to side alkyl chain of a species was found to increase as the steric crowding effect increases. The AM1 reactivity in this work agree well with the experimental results.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.93-99
• /
• 2012

PURPOSES: The purpose of this study is to compare the alkali-silica reactivity for mortar bar and concrete prism specimens using crushed aggregates of 5 types in Korea. And the alkali-silica reactivity for those aggregates are measured by chemical test method. METHODS: The alkali-silica reactivity for those aggregates was measured by chemical test method of KS F 2545, mortar-bar test of KS F 2546, accelerated mortar-bar test method of ASTM C 1260 and concrete prism test method of ASTM C 1293, relatively. RESULTS: The alkali-silica reactivity for those aggregates was verified by chemical test of KS F 2546 and accelerated mortar-bar test of ASTM C 1260. However, it was not by mortar-bar test of KS F 2546 and concrete prism test of ASTM C 1293. CONCLUSIONS: The above results showed that relationship among the four test methods were very low. The results from 3 types of test methods using cement-aggregate combinations appeared to be different. Because the environmental conditions of test methods for measuring the alkali-silica reactivity such as equivalent alkali content(external source), humidity, temperature, and times were different though the aggregates were same. Moreover, alkali-silica reactivity showed the biggest impact when alkalis were supplied form outside and exposed to environmental conditions. The accelerated mortar-bar test method seems to be most appropriate test method for concrete structures exposed to alkali environment.