• Journal of Photoscience
• /
• 제10권3호
• /
• pp.251-255
• /
• 2003

The composites fabricated by blending nonlinear optical (NLO) chromophore such as {4-[2-(4-nitrophenyl)-vinyl] phenyl}diphenylamine (NVPDA) with photoconducting crosslinkable matrix, bis-(4-ethynylphenyl)-(4-octyloxy-phenyl)amine (BEOPEA), showed photorefractive property. Many problems faced in typical organic photorefractive systems such as time-consuming chemical synthesis, difficulty in rational design, intrinsic instability and phase separation could be avoided by this fabrication method.

• Korean Membrane Journal
• /
• 제5권1호
• /
• pp.25-30
• /
• 2003

Chitosan membranes crosslinked with glutaraldehayde that contained chiral environment were prepared. The chitosan membranes were characterized using FTIR and swelling index measurements. Their swelling index in water ranged from 100 to 70%, depending on the crosslinking time. The separation of D- and L-isomers of tryptophan was achieved through a pressure driven membrane separation process, using the self-supporting crosslinked chitosan membranes. The chiral separation performance of the membranes depended strongly on the swelling index of the membranes and the separation conditions such as concentration of feed solutions and different operating pressures. Especially when a chitosan membrane with a swelling index of 70% was used, almost complete optical resolution of D- and L-tryptophan was obtained ; enantiomeric excess (ee %) of 97.92% and flux of 2.26 g/㎡$.$h.

• 대한화학회지
• /
• 제53권3호
• /
• pp.345-354
• /
• 2009

새로운 연료전지용 고분자 전해질 막으로서 알릴기로 터미네이션된 술폰화된 PES계 고분자 를 비스아자이드와의 열적 가교 반응을 이용하여 합성하였다. 공중합체의 조성은 $^1H$ NMR에 의해 확 인되었다. 전도성 부분인 친수성 영역의 균일한 분포와 견고한 에터 술폰계 고분자 주골격의 끝부분에 만 가교기를 도입하여 소수성 영역을 최소화 하는 전략으로 얻어진 가교 고분자 막은 높은 온도에서 우 수한 수소이온 전도도와 열적 안정성을 나타내었으며 또한, 나피온에 비해 3배 이상의 수소이온 선택 성을 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권2호
• /
• pp.134-140
• /
• 2013

UV curing was introduced via a chemical treatment by adding small amounts of a hexafunctional acrylic monomer and a photoinitiator to improve the mechanical properties of PLA. This study also employed a semi-interpenetrated structured polymer network through the process of UV-curing. The UV curing behaviors were investigated using FTIR-ATR spectroscopy and gel fraction determination. Also, the tensile strength was investigated with different hexafunctional acrylic monomer contents and UV doses. The results showed that the crosslinking of UV-induced chemically treated PLA started at a low content of hexafunctional acrylic monomer, resulting in a significant improvement of the mechanical properties compared to those of neat PLA due to crosslinking.

• 대한화학회지
• /
• 제67권6호
• /
• pp.420-428
• /
• 2023

비닐화된 메조포러스 실리카와 재생 폴리에틸렌 사이에 가교결합을 도입하여 컴파운드를 제조하고 물성을 측정하였다. 메조포러스 실리카에 비닐기를 도입함으로써 비극성인 폴리에틸렌과의 가교결합을 유도할 수 있는 물질이 된다. 비닐화된 메조포러스 실리카를 합성하고 재생 폴리에틸렌과의 가교결합을 유도하여, 기존 재생 폴리에틸렌이 가지는 물성보다 더욱 향상된 재생 폴리에틸렌 복합체를 합성하였다. 또한 비닐화 된 메조포러스 실리카를 이용하였을 때, 재생 폴리에틸렌의 등급에 따라 소량 첨가하여도 가교반응이 진행되어 컴파운드의 모든 물리적 특성이 향상되었다. 비닐화된 메조포러스 실리카를 사용하여 4종의 컴파운드를 합성하였으며, 형태와 미세 구조 및 작용기는 TEM, FT-IR 및 XRD로 분석하였다. 비닐화된 메조포러스 실리카를 이용하여 재생 폴리에틸렌과 가교반응으로 3종류의 컴파운드를 배합하였다. 가교결합 유무를 확인하기 위해서 XPS, FT-IR 및 가교도 측정법으로 분석하였으며, Universal testing machine을 이용하여 인장강도, 신장율, 굴곡강도 및 굴곡 탄성율 같은 물리적 특성을 측정하였다. 그 결과, 비닐화된 메조포러스 실리카를 다양한 등급의 재생 폴리에틸렌에 적용함으로써, 기존의 재생 폴리에틸렌이 가지는 취약한 물성을 극복하였다. 비닐화된 메조포러스 실리카-재생폴리에틸렌 복합물질을 신재 폴리에틸렌에 적용한 결과, 복합 컴파운드는 상업적으로 사용할 수 있는 최선의 물성 지표를 나타내었다. 따라서 이 결과는 향후 재생 폴리에틸렌의 사용량을 증가시키고, 자원의 재순환화에 활용될 수 있을 것으로 기대된다.

• 멤브레인
• /
• 제23권6호
• /
• pp.450-459
• /
• 2013

폴리이미드 기체 분리막의 기체 분리 성능을 향상시키기 위해서 2,3,5,6-Tetramethyl-1,4-phenylenediamine(TMPD) 구조를 지닌 폴리이미드를 1,2-Diaminoethane (DAE)과 1,6-Diaminohexane (DAH)으로 가교시켜 분리막을 제조하였다. Fourier transform infrared spectroscopy (FT-IR)를 이용해 가교 후 이미드 고리가 아미드 그룹으로 전환됨을 확인하였다. 폴리이미드의 열분해 온도는 가교 후 감소하였으며, 이는 가교제의 알킬기 분해 때문이다. 가교된 폴리이미드 분리막의 d-spacing은 가교 시간이 증가함에 따라 감소하였다. 가교 후 $CH_4$, $N_2$, $O_2$, $CO_2$ 기체의 투과도는 가교 전 보다 감소하였으며, DAH로 가교된 분리막이 DAE보다 더 높은 투과도를 나타냈다. 투과도와 달리 $CO_2/CH_4$, $CO_2/N_2$, $O_2/N_2$ 기체 선택도 모두 가교 시간이 길어질수록 증가된 결과가 나타났다. $CO_2/CH_4$ 기체의 선택도는 DAE로 6분 가교 시 최대 증가치를 나타냈으며 39.5%까지 증가하였다. $O_2/N_2$ 선택도 또한 DAE로 6분 가교 시 최대 증가치를 가지며 20.5%까지 증가하였다. 이를 통해서 DAE가 DAH보다 선택도 증가에 적합한 가교제임을 예상할 수 있으며 이와 달리 $CO_2/N_2$ 선택도는 DAE로 3분 가교 시 감소해 $CO_2/N_2$ 분리에는 적합하지 않은 결과가 나타났다.

• International Journal of Safety
• /
• 제8권1호
• /
• pp.14-17
• /
• 2009

The $Co^{60}$ $\gamma$-ray irradiation effects on the electrical and thermal characteristics of low density polyethylene crosslinked by Dicumyl peroxide (DCP) were investigated. We experimented on electrical properties as following; electrical tree inception and growing type for applying AC step voltage, AC breakdown strength, volume resistivity with increasing dosage. Also, chemical analyses were performed TGA, gel fraction. These electrical properties changed depending upon its crosslinking degree and byproducts from crosslinking reactions. Crosslinking reactions were considered causing by $\gamma$-ray irradiation and DCP had contained in low density polyethylene.

• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.217-226
• /
• 1995

Alumina powders were dispersed using crosslinkable organic molecules by electrosteric stabilization and then consolidated by crosslinking of organic molecules. The effect of processing variables such as the physicochemical properties of both solvent media and organic molecules, the proportions of mixed organic media, etc. were studied. FT-IR was used todeduce the mechanism of organic molecules adsorption on the alumina particle surfaces. The adsorption characteristics and the electrokinetic behavior of alumina suspensions were correlated with the stability of particle in alumina suspension using rheological measurements. The green body of alumina consolidated by the chemical crosslinking of the adsorbed organic molecules after the alumina suspension had been stabilized was tough enough for green machining and the sintered alumina fabricated by this proposed process also showed a high bending strength and a homogeneous microstructure.

• 한국의류학회지
• /
• 제20권3호
• /
• pp.512-518
• /
• 1996

Microcapsules containing 2, 4, 4'-trichloro-2-hydroxydiphenyl ether and perfumes were prepared by the coacervation using poly (vinyl alcohol) and crosslinking agents. Effects of dispersing agents, core materials, agitating speed and crosslinking agents on microcapsule size were investigated. The mean and deviation of microcapsule diameters decreased with increasing agitation speed. The diameters of m;crocapsules decreased with increasing dispering agent concentration at 6, 000 rpm of agitation speed, but it was not changed at 10, 000 rpm. The dispering effect of PVA is better than that of gum arabic. The slight increase in the diameter of microcapsule was observed when the amount of core material was increased. As the amount of crosslinking agent was increased, the diameter of microcapsule was decreased.

• Bulletin of the Korean Chemical Society
• /
• 제27권7호
• /
• pp.981-985
• /
• 2006

Novel copolymers consisting of poly(2-hydroxyethyl aspartamide-co-N,N'-dimethyl-1,3-propane aspartamide) (PHEA-DPA) were prepared from polysuccinimide (PSI), which is the thermal polycondensation product of aspartic acid, via a ring-opening reaction with N,N'-dimethyl-1,3-propane diamine (DPA) and ethanolamine. The prepared water-soluble copolymer was then crosslinked by reacting it with hexamethylene diisocyanate to provide the corresponding gel. The swelling behavior and morphology of the crosslinked hydrogels were investigated. The degree of swelling decreased with increasing crosslinking reagent due to the higher crosslinking density. It was also confirmed that the swelling property is affected by pH. At low pH (< pH 4), swelling is increased due to the ionization of DPA with a tertiary amine moiety. In addition, a reversible swelling and de-swelling behavior was demonstrated by adjusting the pH of the solution. The prepared hydrogels showed a well-interconnected microporous structure with regular 5-20 $\mu$m sized pores.