• 한국식품영양학회지
• /
• 제29권2호
• /
• pp.153-161
• /
• 2016

This study investigated the chemical composition of Solidago virga-aurea var. asiatica Nakai essential oils collected using different extraction methods. The essential oils obtained by simultaneous steam distillation extraction (SDE) and hydrodistillation extraction (HDE) methods from the aerial parts of Solidago virga-aurea var. asiatica Nakai were analyzed by GC and GC-MS. Ninety-nine volatile flavor compounds were identified in the essential oil produced from Solidago virga-aurea var. asiatica Nakai using the SDE method. These compounds were classified into eight categories in terms of chemical functionality: 26 hydrocarbons, 8 aldehydes, 36 alcohols, 7 ketones, 12 esters, 5 oxides and epixides, 4 acids, and a miscellaneous one. Spathulenol (15.66%) was the most abundant compound. Ninety-eight compounds including of 35 hydrocarbons, 6 aldehydes, 29 alcohols, 6 ketones, 10 esters, 4 oxides and epixides, 7 acids, and a miscellaneous one were identified in the essential oil from the plant using the HDE method. Hexadecanoic acid (24.74%) was the most abundant compound. The chemical composition of Solidago virga-aurea var. asiatica Nakai essential oils extracted by SDE and HDE methods are characterized by high content of sesquiterpene alcohols and acids, respectively. The extraction methods may be influenced in the chemical composition of natural plant essential oils.

• 한국실천공학교육학회논문지
• /
• 제4권2호
• /
• pp.84-90
• /
• 2012

화학분석 설계의 한 사례로서 디지털 기록매체 중 하나인 CD-R (Compact Disc Recordable) 기록층의 단면구조와 기록층의 주요성분인 염료의 구성성분 및 화학구조를 분석하기 위해 분석계획을 수립하고 분석을 수행하는 전 과정을 기술하였다. 미지시료의 화학분석은 많은 경험과 지식을 요하는 복잡한 과정이기 때문에 학생들이 화학분석을 위한 설계 절차를 수립하고 분석방법의 선택이나 자료해석 등에 어려움을 겪고 있어 이해를 돕기 위한 사례로서 CD-R 개발단계에서 실제로 수행했던 한 제품분석의 전 과정을 제시하였다. 본 연구에서는 SEM을 사용하여 CD-R의 substrate (기판) 및 기록층 (Dye 층)의 단면적 구조를 확인하였다, 기록층인 염료는 적절한 용매를 이용하여 용해 수집한 후 TLC (얇은 막 크로마토그래피)를 이용해 성분별로 분리하였다. 분리된 각 성분을 UV-Vis 흡수분광법으로 흡광도를 측정하여 정량하였고, GC-MS와 NMR을 이용해 각 성분의 화학구조를 분석하고 질량분석법을 통해 최종적으로 질량을 확인하였다.

• Tribology and Lubricants
• /
• 제23권5호
• /
• pp.195-200
• /
• 2007

This paper presents the friction induced scuffing and wear defects analysis of a pin bushing bearing based on the chemical composition using a scanning microscopy (SEM) and an energy dispersive X-ray analyzer (EDX). The SEM/EDX system, which may provide good information on the surface thermal defects and chemical compositions, provides impurities such as an aluminum, a silicon, a ferrous component and an oxygen, especially. The EDX measured results show that the oxygen may reduce the strength and a hardness of a pin busing, which may lead to a scuffing and a seizure on the rubbing contact surface. The current technology fabricated by a sintering for a pin bushing bearing should be modified or changed to reduce the oxygen composition and the impurities in pin bushing materials.

• 보존과학회지
• /
• 제18권
• /
• pp.5-18
• /
• 2006

충남 천안 두정동 유적은 4세기 전반에 해당하는 백제시대 유적으로 이곳에서 출토된 고대유리 18점에 대한 가시적 특성 및 화학조성을 분석하여 한국 고대유리의 과학적 특성 및 시대적 상관성을 고찰해 보았다. 가시적 특성 및 미세구조는 광학현미경 및 전자현미경으로, 화학 조성은 파장형분광분석기가 부착된 주사전자현미경(SEM-EDS)을 이용하여 정량 및 정성 분석하였다. 분석 결과, 금박구슬, 관옥, 환옥 등 다양한 형태의 유리가 출토된 두정동에서는 납바륨유리 소다유리 포타쉬유리 등 삼국시대를 중심으로 시대적 흐름에 따라 나타나는 한국 고대유리의 조성이 모두 확인된다. 이와 함께 두정동 유리의 조성은 표면 색상과 밀접한 관계를 가지고 있으며 색상별로 안정제가 차이를 보인다.

• 한국의류산업학회지
• /
• 제15권3호
• /
• pp.430-436
• /
• 2013

The purpose of this study investigates the effects of electron beam(EB) irradiation on the chemical and morphological properties of Hansan ramie fiber. Hansan ramie fibers were irradiated with electron beam doses of 0, 1, 3, 5 and 10kGy. The effect of electron beam irradiation on the chemical components of fibers as well as the surface chemical and morphological properties were investigated using chemical component analysis methods based on TAPPI standards, XPS, and SEM. The results indicate that the surface layers can be removed under suitable EB irradiation doses. Alcohol-benzene extraction and lignin content increases gradually with an increase in EB irradiation and reaching a maximum at an EB dose of 3kGy, and decreases at 10kGy. The surface chemical changes measured by XPS corresponded to the chemical composition analysis results. The C1 peak and the O/C ratio decreased with the removal of the multi-layer and primary layer by EB irradiation. The SEM images show the inter-fibrillar structure etched by EB irradiation up to 5kGy. At 10kGy, the surface structure of the ramie fiber shows highly aligned and distinctive striations in a longitudinal direction. The removal of these exterior layers of the fiber was confirmed by changes in surface morphology as observed in SEM images.

• Macromolecular Research
• /
• 제8권6호
• /
• pp.261-267
• /
• 2000

It is well known that poly(cyclohexylene dimethylene terephthalate) (PCT) is used as the engineering plastics with high melting temperature and fast crystallization rate compared with poly(butylene terephthalate)(PBT). However, poor thermal stability of PCT has limited its practical application due to the drastic decrease of molecular weight during the processing temperature. In order to improve the thermal stability of PCT homopolymer, the copolymer of PCT and PBT was synthesized and the thermal properties of the copolymer have been studied. P(CT/BT) copolymer was obtained by condensation polymerization of DMT, CHDM, and 1,4-butanediol. The chemical structure and composition of the copolymer was investigated by FTIR and NMR analysis. The thermal behavior of copolymer was studied using DSC and it was found that the crystallization-melting behavior of the copolymer was observed for the whole composition range. TGA analysis exhibited that P(CT/BT) copolymer is more stable at the initial stage of thermal decomposition compared with PCT and PBT homopolymers.

• Environmental Engineering Research
• /
• 제15권2호
• /
• pp.93-98
• /
• 2010

This study aims to determine the chemical composition and seasonal variation of atmospheric acid deposition in order to identify possible sources contributing to precipitation. Sampling and analysis of 132 wet deposition samples were carried out from January to December 2008 at Mae Hia Research Center, Chiang Mai University, Chiang Mai Province. Total precipitation was 1,286.7 mm. Mean electro-conductivity and pH values were 0.94 mS/m and 6.27, respectively. Major cations ($Na^+$, ${NH_4}^+$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$) and major anions ($HCOO^-$, $CH_3COO^-$, $Cl^-$, ${NO_3}^-$, and ${SO_4}^{2-}$) were determined by Ion Chromatography. The relative volume weight mean concentrations of anions, in descending order, were ${SO_4}^{2-}$ > ${NO_3}^-$ > $Cl^-$ > $CH_3COO^-$ > $HCOO^-$ and those of cations were $NH_4^+$ > $Ca^{2+}$ > $Mg^{2+}$ > $K^{+}$ > $Na^+$. Results of a principle component analysis highlighted the influence of various possible sources of ions such as agricultural activity, fuel combustion, marine sources, soil resuspension, and biomass burning.

• 한국지반환경공학회 논문집
• /
• 제10권3호
• /
• pp.47-52
• /
• 2009

폐기물을 적절히 관리하고 처리하기 위해 기본 자료가 되는 폐기물의 물리적 특성과 화학적 특성 분석을 위해 충주시에서 발생된 생활폐기물을 대상으로 발생원과 매립장에서 시료채취를 채취하여 겉보기밀도, 폐기물의 물리적 조성, 삼성분, 화학적 조성 및 발열량을 조사 분석하였다. 발생원별조사결과와 매립장 반입폐기물의 물리적 특성 값들은 차이가 있으나, 화학적 조성 값은 큰 차이가 없는 것으로 나타났다. 따라서 환경부에서 도입예정인 생활폐기물전처리시설(MBT(mechanical biological treatment))과 같은 폐기물중간처리 장치를 도입할 경우 물리적 조성 값을 알기위해서는 발생원별 조사가 필수적이지만, 소각로 설계를 위한 폐기물조사에서는 주로 화학적 특성 값을 이용하기 때문에 간단히 매립장에 반입되는 폐기물의 분석치만 조사하여도 큰 문제가 없는 것으로 판단된다. 폐기물의 중간처리에 중요한 생활폐기물의 물리적 성상은 가연성과 비가연성 성분으로 분석할 경우 가연성은 연평균 87.4%로 나타났고, 비가연성의 경우 연평균 12.6%이며, 생활폐기물의 발생원별 겉보기 밀도 평균은 $0.150ton/m^3$이다. 생활폐기물의 삼성분 분석결과 평균은 수분 27.6%, 가연분 60.5%, 회분 11.9%이고, 원소분석 결과 평균 원소성분에 대한 값은 C: 50.1%, H: 6.%, O: 39.5%, N: 1.9%, S: 0.5%, Cl: 1.3%이며, 저위발열량은 2,441kcal/kg이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권7호
• /
• pp.935-940
• /
• 2001

To determine the effect of different growth stages and cultivars on the chemical composition of sorghum plant and its morphological fractions, samples of whole plant, leaf and stem of J.S-263, J.S-88 and Hegari cultivars, harvested at various growth stages were drawn for analysis. All the samples were analysed for their dry matter contents and various cell wall components such as NDF, ADF. hemicellulose, cellulose, lignin, cutin and silica. Significant increase in DM contents of whole sorghum plant, leaf and stem was observed with advancing stage of growth. The highest DM content was recorded in leaf fraction of the plant. All the cell wall constituents increased significantly in whole sorghum plant, leaf and stem as the plant matured. The maximum NDF, ADF, cellulose and lignin contents were observed in stem fraction, followed by whole plant. However, the hemicellulose, cutin and silica contents were higher in leaf fraction of the plant. The cultivars were found to have some effect on the chemical composition of whole plant, leaf and stem fractions. The results indicated that plant maturity had a much greater effect on the chemical composition of sorghum plant, whereas it was little affected by cultivars.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.35-37
• /
• 2001

This study has investigated the chemical characteristics and the contamination of groundwater in relation to land use in Daejeon Metropolitan City. An attempt was made to distinguish anthrophogenic inputs from the influence of natural chemical weathering on the chemical composition of groundwater at Taejon. Groundwater samples collected at 170 locations in the Taejon area show very variable chemical composition of groundwater, e.9. electrical conductance ranges from 65 to 1,290 S/cm. Most groundwater is weakly acidic and the groundwater chemistry is more influenced by land use and urbanization than by aquifer rock type. Most of groundwater from green areas and new town residential districts has low electrical conductance, and is of Ca-HC $O_3$ type, whereas the chemical composition of groundwater from the old downtown and industrial district is shifted towards a Ca-Cl (N $O_3$+S $O_4$) type with high electrical conductance. A number of groundwater samples in the urbanized area are contaminated by high nitrate and chlorine, and exhibit high hardness. The Ep$CO_2$, that is the $CO_2$ content of a water sample relative to pure water, was computed to obtain more insight into the origin of $CO_2$ and bicarbonate in the groundwater. Factor analysis of the chemical data shows that the HC $O_3$ and N $O_3$ concentrations have the highest factor loadings on factor 1 and factor 2, respectively. Factors 1 and 2 represent major contributions from natural processes and human activities, respectively. The results of the factor analysis indicate that the levels of $Ca^{2+}$, $Mg^{2+}$, N $a^{+}$, Cl and SO4$^2$ derive from both pollution sources and natural weathering reactions.ons.