• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.11-17
• /
• 2015

Fouling in heat exchanger becomes a major problem of dairy industry and it increases the production cost. These are lost productivity, additional energy, additional equipment, chemical, manpower, and environmental impact. Fouling also introduces the risk of food safety due to the improper heating temperature which allow the survival of pathogenic bacteria in milk, introducing biofilm formation of pathogenic bacteria in equipments and spreading the pathogenic bacteria to milk. The aim of this study is to determine the fouling rate during pasteurization process in heat exchanger of pasteurized milk produced by Village Cooperative Society (KUD) "X" in Malang, East Java Indonesia by using empirical modeling. The fouling rate is found as $0.3945^{\circ}C/h$ with the heating process time ranged from 0 to 2 hours and temperature difference (hot water inlet temperature and milk outlet temperature) ranged from 0.654 to $1.636^{\circ}C$. The fouling rate depends on type and characteristics of heat exchangers, time and temperature of process, milk type, age of milk, seasonal variations, the presence of microorganism and more. This results will be used to plan Cleaning In Place (CIP) and to design the control system of pasteurization process in order to maintain the milk outlet temperature as standard of pasteurization.

• 대한영양사협회학술지
• /
• 제11권1호
• /
• pp.105-113
• /
• 2005

The purpose of the study was to evaluate the perception of importance about HACCP guidelines of dietitians. A questionnaire was developed to achieve research objectives and sent to random samples of 500 dietitians by a mail ; 418(84%) responses were analyzed. The respondents used three-point-scale to rate their perception of importance about HACCP from 1-"will be necessary" to 3-"very important". All statistical analyses were conducted using SAS package(version 8.12) for Windows. Means and standard deviations were computed for all variables. One-way analysis of variance and Duncan's multiple range test were used to assess differences in the perception of importance about HACCP guidelines among business and industry, health care and school foodservice managers. The study results were summarized as follows. Dietitians especially had lower perception of importance on the contents of Critical Control Points(CCPs), such as; adequate thawing methods and keeping records(1.95) and correct cleaning and sterilizing for raw vegetables and fruits(1.93). The rates of perception of importance about HACCP guidelines were significantly different from 19 of the 37 contents among business and industry, health care and school foodservice(p<.05 or p<.01 or p<.001). Generally, the item related to purchasing and inspection management had the highest perception level score and the item related to pre-preparation management had the lowest perception level score in foodservice production process(p<.001). Results indicate that there is a need for increased education of dietitians about HACCP principles and appropriate practices.

• 환경위생공학
• /
• 제14권1호
• /
• pp.54-61
• /
• 1999

The industrial techniques of ultrasound have been used in the various fields, such as cleaning, medical surgery, emulsification, cell disruption etc. Especially the application of cell disruption was interested in the field of disinfection process in water by ultrasonic irradiation. It has been recognized that the ultrasounds are irradiated in aqueous solution, cavitation bubbles are generated and shock waves of high temperature and pressure are emitted as the bubbles are developed and finally broken, which function as a energy source to promote reaction efficiencies of various kinds of chemical reactions such as disinfection reaction in water. Therefore, this study was performed to apply the ultrasound for the disinfection method of infected drinking raw water and to discuss the limiting factors such as pH, sample volume and reaction temperature influenced on the removal efficiency of E. coli from experimental analysis of the results obtained in bench-scale plant. For the experiments to measure the influence of reaction parameters in the ultrasonic disinfection process, escalated reactivity of aqueous solutions was excellent when pH in aqueous solution was low, and sample volume was small. On the contrary, the reactivity of disinfection became elevated when reaction temperature was high. It was found that the rate constant of disinfection reaction was applied by Chick's law, reaction kinetics of Chick's law was irreversible and pseudo-first order at all the tested conditions.As a conclusion it appeared that the technology using ultrasonic irradiation can be applied to the treatment of disinfection in infected water which are difficult to be treated by conventional methods.

• 한국의류학회지
• /
• 제34권3호
• /
• pp.508-517
• /
• 2010

One-step reduction/dyeing method was optimized for wool dyeing with natural indigo dye in this study. The effects of reduction/dyeing conditions including dye temperature and time, the pH of bath, concentration of dye, and reducing agent on dye uptake and color were investigated. The dye uptake was higher with no addition of alkali. Dyeing was carried out through the use of only sodium hydrosulfite in the bath. The maximum dye uptake was obtained at $60^{\circ}C$ for 30min and the dyed fabrics appeared in the PB Munsell color range. Dye uptake improved with the increase of a natural indigo dye concentration with the same sodium hydrosulfite concentration. At a higher dye uptake, the fabric color became more purplish and the maximum absorption shifted from 660nm to 620nm. Color reproducibility was reliable with a color difference in the range of 0.41~1.43. Regardless of color strength, washing and dry cleaning fastnesses were good with a 4/5 rating, and fastnesses to rubbing and light were acceptable with a 3/4~4 rating.

• 상하수도학회지
• /
• 제22권1호
• /
• pp.79-86
• /
• 2008

In Korea, most of the drinking water treatment relied upon the availability of the surface water, of which the raw water quality varied significantly by season and location. Therefore, the comparison of two operation modes (Pressurized type and Submerged type membrane system) must be estimated before the long-term establishment of two systems. In this study, two pilot-scale microfiltration systems with the capacity of $50m^3/day$ were installed and operated in two different modes, and the applicability of the system was determined based on the results such as the TMP (Trans-Membrane Pressure) and flux. For quantitatively comparing the two systems, a new concept, DRF (Differential Resistance Fraction) was introduced. The accumulated sum of the permeate after each cycle of chemical cleaning was also used as a tool for the system comparison.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.14-22
• /
• 2016

Pulping is a stage that can change fibrous raw materials into pumpable slurry. Recovered paper can be defibrated to individual fibers by shear stress generated by rotation of a rotor and water. Disintegration of recovered paper is more complicated than that of chemical pulp. When disintegration of recovered paper is poor, screening and cleaning efficiency will be worse and properties of paper will also be deteriorated. Therefore, pulping is an important treatment for improvement of availability of recovered paper and process runnability. In this study, degrees of disintegration of KOCC obtained from a linerboard mill was analyzed with a pilot-scale screen. Flake removal of KOCC slurry was performed by a pilot screen. Simple pumping action gave a positive effect on disintegration of KOCC. After pumping for 10 minutes, paper strength increased without the change of water retention value and fibrillation of KOCC slurry. This phenomena can be explained by modification of hornified surface of KOCC fibers by shear stress generated by pumping. Consequently, disintegration efficiency of KOCC can be enhanced by control of retention time at pulper or an agitation power at chests of papermaking process.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2005년도 제21회 발표논문집
• /
• pp.71-88
• /
• 2005

경주석빙고 내부암석의 표면에는 갈색오염층이 생물체와 함께 두텁게 형성되어 있다. 이 부분에서 소량의 시료를 채취하여 화학성분, 광물성분, 염성분 및 미세조직분석을 실시하였다. 연구 결과, 오염층은 연질로서 제거가 용이한 것으로 파악되었다. 그러나 암석의 표면도 오랜 시간이 오염물질과 수분으로 인해 풍화가 많이 진행된 상태이므로 제거시 암석층도 함께 제거될 수 있다. 이 표면오염물질은 상부 봉분의 토양이 수분과 함께 석빙고 내부로 흘러내려 암석표면에 흡착된 것과 경주석빙고 입구에 깔려진 조립사질토양에서 부유되는 먼지의 흡착으로 생성된 것으로 추정된다. 경주석빙고를 보존하기 위해서는 표면오염물의 제거에 앞서 형성의 원인인 상부에서 흘러내리는 수분의 방수와 주변에 조성된 조립사질토양을 부유되지 않는 다른 것으로 대체하는 작업이 우선시된다. 이후에 표면오염물을 제거하고, 내부를 습하지 않게 유지해주어야 한다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.101-101
• /
• 2003

Al 박막의 화학증착(CVD)과 Al-Cu 합금박막의 물리증착(PVD)을 조합하는 CVD-PVD Al 공정은 수평방향의 배선과 수직방향의 via를 동시에 형성할 수 있으므로 공정단순화 및 생산원가절감 측면에서 장점이 있어서 DRAM 둥의 반도체 소자의 배선공정으로 매우 유망하다[1]. 본 연구에서는 CVD-PVD Al 공정을 이용하여 초고집적소자의 Al via와 Al 배선을 동시에 형성할 때 층간절연막의 영향을 조사하고 그 원인을 규명하였다. Al CVD를 위한 원료기체로는 dimethylaluminum hydride [($CH_3$)$_2$AlH]를 사용하였고 PVD는 38$0^{\circ}C$에서 실시하였다 층간절연막에 따른 CVD-PVD Al의 via hole 매립특성을 조사한 결과, high-density plasma(HDP) CVD oxide의 경우에는 via hole 매립특성이 우수하였으나, hydrogen silscsquioxane (HSQ)의 경우에는 매립특성이 우수하지 않아서 via 저항이 불균일 하였다. 이는 via 식각 후 wet cleaning 과정에서 HSQ에 흡수된 수분이 lamp를 이용한 degassing 공정에 의해서 완전히 제거되지 않아 CVD-PVD 공정 중에 탈착되어 Al reflow에 나쁜 영향을 미치기 때문으로 판단된다. CVD-PVD 공정 전에 40$0^{\circ}C$, $N_2$ 분위기에서 baking하여 HSQ 내의 수분을 충분히 제거함으로써 via 매립특성을 향상시킬 수 있었다. CVD-PVD Al 공정은 aspect ratio 10:1 이상의 via hole도 완벽하게 매립할 수 있었고 이에의해 제조된 Al 배선은 기존의 W plug 공정에 의해 제조된 배선에 비해 낮은 via 저항을 나타내었다.

• 한국해양공학회지
• /
• 제17권2호
• /
• pp.8-13
• /
• 2003

Soil, ground water, and sea bed are exposed to a continuous accumulation of polluted materials, causing serious environmental damage. It has been reported that such pollution causes a massive mortality of fish stock in rivers due to the resuspension of toxic chemicals, occurring during strong wind conditions. Therefore, it becomes apparent that there is an immediate demand for the restoration treatment of polluted river bed (or sea bed) sediment layers. Pollution levels of major rivers and ports, such as Paldang, Kyungan rivers, and Masan port, are becoming of great public concern, and are posing a serious environmental threat. In particular, the pollution of the Shi-hwa river has become a nation wide issue for the last few years. In spite of such public concern, the pollution levels of such rivers or ports are worsening everyday. In this study, an environmentally sound engineering package is introduced that helps to restore the polluted river bed or sea bed sediments. This engineering package consists of a suction facility, followed by a series of mechanical, chemical, and biological treatment units. The suction facility is designed to minimize secondary pollution that occurs from the resuspension of toxic materials during suction. The sea bed cleaning engineering package is designed to be installed on the top of a floating barge. Such a combination of environmental plant and shipbuilding technology provides a cost-effective solution, minimizing the transportation between suction and treatment facilities.

• Journal of Microbiology and Biotechnology
• /
• 제16권6호
• /
• pp.863-869
• /
• 2006

The behavior of submerged membrane bioreactor (SMBR) filtration systems utilizing rapid air backpulsing as a cleaning technique to remove reversible foulants was investigated using a genetic algorithm (GA). A customized genetic algorithm with suitable genetic operators was used to generate optimal time profiles. From experiments utilizing short and long periods of forward and reverse filtration, various experimental process parameters were determined. The GA indicated that the optimal values for the net flux fell between 263-270 LMH when the forward filtration time ($t_f$) was 30-37 s and the backward filtration time ($t_b$) was 0.19-0.27 s. The experimental data confirmed the optimal backpulse duration and frequency that maximized the net flux, which represented a four-fold improvement in 24-h backpulsing experiments compared with the absence of backpulsing. Consequently, the identification of a region of feasible parameters and nonlinear flux optimization were both successfully performed by the genetic algorithm, meaning the genetic algorithm-based optimization proved to be useful for solving SMBR flux optimization problems.