• 펄프종이기술
• /
• 제29권3호
• /
• pp.26-33
• /
• 1997

The bacterial celluloses are very different in its physical, chemical and morphological structures compared to wood cellulose. These fibers have many unique properties that are potentially and commercially beneficial. This study was aimed to elucidate the production of bacterial celluloses and to improve their physical properties by chemical pretreatment. Bacterial celluloses produced by static culture had gel-like pellicle structure. The pellicle thickness was increased with the increasing time, and its layer was about 1.8cm after one-month incubation. The pellicles extruded from the cells of Acetobacter had a non-crystalline structure during initial growing stages, gradually getting crystaliyzed with the incubation time elapse, and eventually fumed to the cellulose I crystals. Young＇s modulus of bacterial cellulose sheet was increased with increasing NaOH concentration, and resulted in the highest at 5% NaOH concentration. Similar results with NaClO3 pretreatment can be observed. Too concentrated alkali solutions induced the destruction of cellulose fibrils and changed the mechanical properties of the sheets. These alkaline pretreatment have removed non-cellulosic components(NCC) from the bacterial cellulose, and enhanced inter-abrillar bonding by direct close contact among cellulosic fibrils.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.912-917
• /
• 2010

It was known that oil-filled transformer's life depended on insulating paper which was applied to transformers for insulating of transformer. Therefore when paper was aged, its electrical, mechanical and chemical characteristics were changed. Especially if operating temperature was high, paper was quickly damaged. As cellulose paper which was mainly used for solid insulation of transformers was degraded, the cellulose polymer chains broke down into shorter lengths and gases such as CO, $CO_2$, $CH_4$, $C_2H_4$ and so on were produced from paper. Also by-product known as furan compounds were producted from paper and it were dissolved within insulating oil. In this paper accelerating aging cell was aged during 60 hours at 100, 150, 180 and $200^{\circ}C$, respectively, so evaluating the chemical characteristics of cellulose paper by thermal. An it were performed analysis such as tensile strength(TS), dissolved gas analysis(DGA) and high performance liquid chromatography(HPLC). Also for analyzing of correlation between insulating degradation characteristics, it was performed linear regression method as statistical treatment.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1851-1854
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.649-652
• /
• 2013

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2006년도 춘계 학술발표회 논문집
• /
• pp.149-152
• /
• 2006

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권3호
• /
• pp.166-170
• /
• 2004

Gluconobacter oxydans that produces the cellulose was isolated. In order to confirm the chemical features of cellulose, various spectrophtometeric analysis were carried out using electron microscopy, X-ray diffractogram, and CP/MAS $\^$13/C NMR. The purified cellulose was found to be identical to that of Acetobacter xylinum. For effective production of cellulose, the various carbon and nitrogen sources, mixture of calcium and magnesium ions, and biotin concentration were investigated in flask cultures. Among the various carbon sources, glucose and sucrose were found to be best for the production of cellulose, with maximum concentration of 2.41 g/L obtained when a mixture of 10 g/L of each glucose and sucrose were used. With regard to the nitrogen sources, when 20 g/L of yeast extract was used, the maximum concentration of bacterial cellulose was reached. The concentration of cellulose was increased with mixture of 2 mM of each Ca$\^$2+/ and Mg$\^$2+/. The optimum biotin concentration for the production of cellulose was in the range of 15 to 20mg/L. At higher biotin concentration (25-35mg/L). the bacterial cellulose production was lower.

• 멤브레인
• /
• 제32권5호
• /
• pp.348-356
• /
• 2022

바이오산업의 발전으로 의약품, 식품 등의 생산 과정의 분리/정제 공정에 사용되어 왔던 기존의 컬럼 크로마토그래피를 대체하여 더 높은 처리효율을 갖는 막 크로마토그래피가 부상하고 있다. 본 연구에서는 서로 다른 기공 크기의 두 가지 상용 셀룰로오스 아세테이트(Cellulose acetate, CA) 분리막을 탈아세틸화 과정을 통해, 리간드의 개질이 용이한 다공성 재생 셀룰로오스 지지체를(Regenerated cellulose, RC) 제조하였다. 음이온 교환능을 부여하고자 grafting을 수행하였으며, 구체적으로는 UV 중합법을 통해 4차 암모늄을 포함하는 음이온 교환 리간드(MAPTAC)를 부착하여 음이온 교환용 흡착막을 제조하였다. 단백질 흡착 용량은 정적 흡착 용량(Static binding capacity, SBC)시험을 통해 총 단백질 흡착 용량을 측정했고, 동적 흡착 용량(Dynamic binding capacity, DBC)을 측정하여 상용막과 비교 평가하였다. 성능 평가 결과 단백질 흡착량은 넓은 표면적에 의해 리간드 밀도가 높은, 기공 크기가 작은 순서로 높게 측정되었고, 상용 CA분리막을 탈아세틸화하고 리간드를 부착시킨 분리막(RC 0.8 + MAPTAC 43.69 mg/ml, RC 3.0 + MAPTAC 36.33 mg/ml)이 상용 막 크로마토그래피 제품(28.38 mg/ml) 대비 높은 흡착 용량을 보였다.

• Journal of Microbiology and Biotechnology
• /
• 제18권3호
• /
• pp.465-471
• /
• 2008

Highly active, stable, and magnetically separable immobilized enzymes were developed using carboxymethyl cellulose (CMC) and diethylaminoethyl cellulose DEAE-C; hereafter designated "DEAE" as supporting materials. Iron oxide nanoparticles penetrated the micropores of the supporting materials, rendering them magnetically separable. Lipase (LP) was immobilized on the surface of the supporting materials by using cross-linked enzyme aggregation (CLEA) by glutaraldehyde. The activity of enzyme aggregates coated on DEAE was approximately 2 times higher than that of enzyme aggregates coated on CMC. This is explained by the fact that enzyme aggregates with amine residues are more efficient than those with carboxyl residues. After a 96-h enantioselective ibuprofen esterification reaction, 6% ibuprofen propyl ester was produced from the racemic mixture of ibuprofen by using DEAE-LP, and 2.8% using CMC-LP.

• 폴리머
• /
• 제30권6호
• /
• pp.532-537
• /
• 2006

최근 환경문제가 대두되면서 기존의 석유계 플라스틱을 대체할 생분해성 플라스틱에 관심이 고조되고 잇다. 이에 본 실험에서는 토양에서 생분해가 가능한 셀룰로오스 디아세테이트/전분 혼합체를 제조하여 그 특성을 연구하였다. 이 혼합체에 가소제로 트리아세틴을 첨가하여 용융가공한 복합체의 물성을 조사하였다. 전분의 함량이 증가할수록 이 복합체의 가공성이 향상되며 인장강도와 탄성률은 감소하고 신율은 증가하였다. 전분의 함량이 증가하면 복합체의 $T_g$는 감소하였다. SEM을 이용하여 전분의 복합체내에서의 분산성을 관찰하였다.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.459-468
• /
• 2008

Methyl methacrylate(MMA) was grafted onto microcrystalline cellulose(MCC) with ceric ammonium nitrate(CAN) as a redox initiator at the various conditions. The cellulose triacetate(CTA) composite films added MCC and MMA-grafted MCC powders were prepared on a glass plate. The graft yield(GY) and graft efficiency(GE) of the grafted MCC were calculated with the simple equations by the weight balance method. The double bond of C=O on the grafted MCC surfaces was confirmed by the fourier transform infrared spectroscopy with attenuated total reflection(FT-IT ATR) spectrophotometer. After grafting, the degree of crystallinity of cellulose powders was decresed by judging from x-ray diffraction(XRD) data. Scanning electron microscope(SEM) photos showed the only solvent and CAN solution could change the roughness of MCC powders and the effect of powder dispersions in composite matrix. The tensile strength of MCC/CTA composite films was decreased with increase of MCC powder contents. When 5% grafted MCC was added, the tensile strength of grafted MCC/CTA composite films was increased from 82.3 MPa to 97.2 MPa. The thermal property of powders was also analyzed by the thermogravimetric analysis(TGA).