• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.717-724
• /
• 2017

To improve the running safety of a tram operating on a concrete embedded track, a bogie, the core system of the tram, was developed and fabricated. After it was integrated with the prototype car body, a short distance track with a sharp curve and steep gradient was constructed for the test operation. A formula to check the interference of the wheel flange with the track during running was proposed. Based on the results provided by the formula, the track was designed. Another simple formula was derived to estimate the derailment quotient and the wheel unloading ratio. During running on the track, the acceleration of the car body was measured and the interface status between the wheel and the track was monitored by a video system. According to the results calculated by these simple formulas, the derailment quotient and wheel unloading ratio were estimated to be within the safety criteria. In the actual test, no derailment occurred and the measured acceleration satisfied the criteria. Also, there was no interference between the wheel and track. The video monitoring results showed no signs of derailment, such as the climbing of the wheel. The pinion in the center showed good running safety, contacting smoothly with the rack. The measurements of environmental noise proved that the criteria were satisfied.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.85-90
• /
• 2015

The objective of this study was comparison of seed yields according to different seeding rates, seeding time and application of chemical fertilizations in Yanji region of China. The experiment was conducted on commercial farmland at Yanji region in 2013. All the experimental fields were designed following randomized block design with 3 replicates. The plant spacing was applied as $65{\times}1cm$ distance. To check the effect of seeding rate, two different seeding rate, 0.2 kg/0.1ha and 0.5 kg/0.1ha were applied. The higher seed yield was observed in low seeding rate (0.2 kg/0.1ha). The application of fertilizer (mixture of N and P) showed different results following different experimental fields. However, there were little positive effects following fertilizer application into commercial farmland. When we compare seed yields between two different seeding dates, $4^{th}$ May and $29^{th}$ May, the earlier seeding date ($4^{th}$ May) showed higher seed yields. In considering these results, low seeding rate and early seeding time is important for getting high camelina seed yields.

• Economic and Environmental Geology
• /
• v.44 no.4
• /
• pp.289-302
• /
• 2011

Since the frequency of the earthquake occurrence in Korean peninsular is continuously increasing, the possibility that massive landslides are triggered by earthquake is also growing in Korea. Previously, the landslide is known to be induced by large magnitude earthquake, whose magnitude is larger than 6.0. However, the landslide can be induced by only small magnitude earthquake, especially in the fully saturated soil. Therefore, the susceptibility of landslide caused by small magnitude earthquake in fully saturated soil is analyzed in this study. For that, the topographical and geological characteristics of the site were obtained and managed by GIS software. In the procedure of the study, slope angle, cohesion, friction angle, unit weight of soil were obtained and constructed as a spatial database layer. Combining these data sets in a dynamic model based on Newmark's displacement analysis, the landslide displacements were estimated in each grid cell. In order to check out the possibility of the earthquake induced landslides, the level of the groundwater table is varied from dry to 80% saturated soil. In addition, in order to analyze the effect of the magnitude of earthquake and distance to epicenter, four different earthquakes epicenters were considered in the study area.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.105-113
• /
• 2011

Since existing thematic maps have been made with medium- to low-resolution satellite images, they have several shortcomings including low positional accuracy and low precision of presented thematic information. Digital aerial photo image taken recently can express panchromatic and color bands as well as NIR (Near Infrared) bands which can be used in interpreting forest areas. High resolution images are also available, so it would be possible to conduct precision land cover classification. In this context, this paper implemented object-based land cover classification by using digital aerial photos with 0.12m GSD (Ground Sample Distance) resolution and IKONOS satellite images with 1m GSD resolution, both of which were taken on the same area, and also executed qualitative analysis with ortho images and existing land cover maps to check the possibility of object-based land cover classification using digital aerial photos and to present usability of digital aerial photos. Also, the accuracy of such classification was analyzed by generating TTA(Training and Test Area) masks and also analyzed their accuracy through comparison of classified areas using screen digitizing. The result showed that it was possible to make a land cover map with digital aerial photos, which allows more detailed classification compared to satellite images.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.68.1-68.1
• /
• 2012

The best part of graphene is - charge-carriers in it are mass less particles which move in near relativistic speeds. Comparing to other materials, electrons in graphene travel much faster - at speeds of $10^8cm/s$. A graphene sheet is pure enough to ensure that electrons can travel a fair distance before colliding. Electronic devices few nanometers long that would be able to transmit charge at breath taking speeds for a fraction of power compared to present day CMOS transistors. Many researches try to check a possibility to make it a perfect replacement for silicon based devices. Graphene has shown high potential to be used as interconnects in the field of high frequency electrical devices. With all those advantages of graphene, we demonstrate characteristics of electrical and optical properties of graphene such as the effect of graphene geometry on the microwave properties using the measurements of S-parameter in range of 500 MHz - 40 GHz at room temperature condition. We confirm that impedance and resistance decrease with increasing the number of graphene layer and w/L ratio. This result shows proper geometry of graphene to be used as high frequency interconnects. This study also presents the optical properties of graphene oxide (GO), which were deposited in different substrate, or influenced by oxygen plasma, were confirmed using different characterization techniques. 4-6 layers of the polycrystalline GO layers, which were confirmed by High resolution transmission electron microscopy (HRTEM) and electron diffraction analysis, were shown short range order of crystallization by the substrate as well as interlayer effect with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups on its layers. X-ray photoelectron Spectroscopy (XPS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation, and Fourier Transform Infrared spectroscopy (FTIR) and XPS analysis shows the changes in oxygen functional groups with nature of substrate. Moreover, the photoluminescent (PL) peak emission wavelength varies with substrate and the broad energy level distribution produces excitation dependent PL emission in a broad wavelength ranging from 400 to 650 nm. The structural and optical properties of oxygen plasma treated GO films for possible optoelectronic applications were also investigated using various characterization techniques. HRTEM and electron diffraction analysis confirmed that the oxygen plasma treatment results short range order crystallization in GO films with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups. In addition, Electron energy loss spectroscopy (EELS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation and XPS analysis shows that epoxy pairs convert to more stable C=O and O-C=O groups with oxygen plasma treatment. The broad energy level distribution resulting from the broad size distribution of the $sp^2$ clusters produces excitation dependent PL emission in a broad wavelength range from 400 to 650 nm. Our results suggest that substrate influenced, or oxygen treatment GO has higher potential for future optoelectronic devices by its various optical properties and visible PL emission.

• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.14-23
• /
• 2014

Existing attending management systems require a high cost and are lack of convenience. In this paper, we propose a convenient and practical attending management system as follows: First, our system allows us to construct an attendance book in an easy and simple way. A professor does not have to provide the information of students using the small screen of his smartphone. Instead, each student manages his own information via the app designed for a student in our system. Then the professor can construct the attendance book using another app designed for the professor by confirming the requests from the app designed for a student. Second, our system enables a professor to utilize the pictures of students as well as other information of students to have a good relationship with students. Third, our system provides a functionality of checking attendance automatically by calling the names of students via the app designed for the professor. Then the professor has only to match the name with the face of each student. Fourth, our system provides a functionality of checking attendance in a very fast manner. Our system can complete this behavior within a short time since all students can join the attendance simultaneously by using the app designed for the student. Fifth, our system can prevent an illegal attendance easily by utilizing the distance information.

• Korean journal of applied entomology
• /
• v.59 no.3
• /
• pp.257-264
• /
• 2020

The purpose of this study was to investigate the attraction distance range of pheromone traps used in the control of stink bugs, which are a problem in persimmon orchards, and the effects of sticky traps in increasing the efficiency of pheromone traps. Labeled individuals were released and then recaptured on pheromone and sticky traps. Riptortus clavatus was attracted to pheromone traps up to 60 m away. The capture rates of R. clavatus on sticky traps were 35%, 27%, 34%, 2.9%, and 0.6% after 0, 1, 2, 3, and 4 weeks To improve clarity, II have added this information from the details shown in the figures. Please check whether you agree.of exposure of the traps to the environment, respectively. Besides, when both pheromone and sticky traps were used at the same time following the release-recapture method, the capture rate of R. clavatus was 12 times higher than that by using pheromone traps only.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.9-16
• /
• 2017

As a preliminary study of enter or leaving traffic patterns of the Korea main port, port Management Information System (Port-MIS) data was used to check the volume of vessels entering and leaving the port of Busan, and three consecutive days from each seasons were selected for study. Selected 12-day General Information Center on Maritime Safety & Security (GICOMS) data was also used to analyze the traffic pattern in the main traffic lane of Busan port for dangerous goods carrier. Also, the distance between dangerous goods carriers and Oryukdo breakwater of east breakwater in the main traffic lane was analyzed. Collision probability was estimated using the cumulative probability distribution function of the normal distribution for the maritime traffic safety audit scheme based on the assumption that a ship's trajectory has a normal distribution for a section of the route. However, in case of entry or leaving thorough the Oryukdo breakwater and entry thorough the east breakwater, ship's sailing trajectories were revealed not to follow a normal distribution via regularity testing using a KS-test and SW-test. Especially in the north port, the tendency of the right side of the ship to pass was remarkable. It is desirable to develop a traffic model suitable for the characteristics of the port rather than to apply general traffic theories, and to apply this model to a maritime traffic safety diagnosis, so further research is needed.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.188-200
• /
• 1995

A design of unit magnification 2-mirror system with high resolution is presented. It is for soft X-ray(wavelength of 13 nm) projection imaging and suitable for preparation of high density semiconductor chip. In general, a holosymmetric system with unit magnification has the advantage that both coma and distortion are completely eliminated. In our holosymmetric 2-mirror system, spherical aberration is addtionally removed by using two identical paraboloidal mirror surfaces and field curvature aberration is also corrected by balancing Petzval sum and astigmatism which depends on the distance between two mirrors, so that the system is a aplanatic flat-field paraboloidal 2-mirror holosymmetric system. This 2-mirror system is small in size, and has a simple configuration with rotational symmetry about optical axis, and has also small central obscuration. Residual finite aberrations, spot diagrams, and diffraction-based MTF's are analyzed for the check of performances as soft X-ray lithography projection system. As a result, the image sizes for the resolutions of$0.25\mum$and $0.18\mum$are 4.0 mm, 2.5 mm respectively, and depths of focus for those are $2.5\mum$, $2.4\mum$respectively. This system should be useful in the fabrication of 256 Mega DRAM or 1 Giga DRAM. DRAM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.3
• /
• pp.175-186
• /
• 2017

In this study was to survey method of national/public land actual condition survey to utilization of UAV, in order to evaluate the economic and accuracy. we carried out the comparative evaluation of the cadastral status surveying in terms of accuracy of parcel checkpoint, economical costs. The results are summarized as follows. First, average position error of the orthoimage was 0.033m in X error, 0.023m in Y error when the RMSE average calculated 0.046m from the intersection of plane distance connections. Secondly, it was appeared the accuracy of the orthophotograph is 0.076m at the maximum RMSE of the UAV orthoimage check point and 0.042m at the minimum RMSE compared with the VRS-GNSS survey results. Thirdly, when the allowable error specified in the implementing regulation of the current cadastral survey is applied, all of the checkpoint of 0.360m tolerance corresponding to the scale of 1/1,200 is satisfied. Finally, UAV utilization method in national/public land actual condition survey is 26,497,436(KRW) cheaper than cadastral survey method for In the economic evaluation of national/public land actual condition survey. Therefore, as a result of this study shows that the method of utilizing UAV in the national/public land actual condition survey satisfies legal standards in terms of accuracy and economical aspect is a way to further reduce the local government budget.