• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1124-1130
• /
• 2015

Moisture and high temperature are the most important factors that lead to the ageing of oil-paper insulation, but the research about space charge characteristics of oil-paper insulation does not take the combined effect of ambient temperature, moisture and thermal ageing into account. The pulsed electroacoustic (PEA) method was used to investigate the influence of moisture and temperature on space charge characteristics of oil paper at different ageing stages. The results showed that moisture could speed up formation of space charge in oil paper when water concentration was low, but the formation was restrained if the water concentration was high. At the beginning of thermal ageing, heterogeneous charge accumulation had predominance, but it gradually changed to homogeneous charge injection with ageing. It was believed that moisture concentration could speed up ageing and enhance charge accumulation on one hand, and accelerate or slow down the establishment speed of space charge on the other hand, therefore, charge accumulation type changed with ageing. The more seriously the oil-paper insulation was thermally aged, the deeper the trap energy level was, hence more space charge was trapped, which could be speeded up by increasing the ageing temperature, but the effect of ambient temperature did not fit the Arrhenius law.

• Bulletin of the Korean Chemical Society
• /
• 제28권3호
• /
• pp.447-450
• /
• 2007

Trap effects on the formation of space-charge field (SCF) associated with the photorefractivity of nonlinear optical polymers were studied by the Monte Carlo simulation using modified Gaussian disorder model. The charge transport dynamics influenced by the presence of trap molecules controls the formation of SCF via the charge distribution. Temporal behavior of SCF formation and SCF dependence on the trap depth are discussed in terms of the concentration and distribution of charges (holes and ionized acceptors) developed following illumination of light. The correlation of the trap depth and the energetic disorder is presented for an optimal efficiency for the SCF formation.

• 한국군사과학기술학회지
• /
• 제19권3호
• /
• pp.339-345
• /
• 2016

This paper is concerned with the numerical simulation result of pressure propagation to the main charge by warhead penetration into concrete targets. In this study, we developed on-line pressure measurement method in the main charge during warhead penetration. Using the on-line pressure measurement method, we successfully recorded the pressure-time history in the main charge during the field penetration test. Then we compared result of numerical simulations with test data and found that the simulation results are in good agreement with the test results. Finally, through the numerical calculations it is concluded that the installation of liner is effective in reducing pressure level produced in the main charge.

• 한국산학기술학회논문지
• /
• 제6권6호
• /
• pp.478-485
• /
• 2005

본 논문에서는 전하중첩법을 이용하여 다극성, 다도체 직류송전선의 주변 이온장을 해석하였다. 이와 관련한 알고리즘은 비선형 편미분 방정식으로 표현되어 매우 복잡하기 때문에 문제를 해석적으로 풀기가 매우 어렵다. 그래서 여기서는 다극성, 다도체 직류 송전선에 적용할 수 있는 컴퓨터 프로그램을 개발하였고 제안한 알고리즘의 타당성을 증명하기 위해 공간전하를 고려한 도체표면의 전계강도 및 코로나 전류밀도, 공간전하 밀도를 계산하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.97-101
• /
• 2009

A new approach was applied to examine the charge generation and transport in organic photoconductive devices by Monte‐Carlo simulation utilizing multiple site interactions of carriers with all other charges within Coulomb radius. Stepwise generation frame was considered first by a charge separation process that was counted in two separate transactions, i.e., hopping against physical decay and dissociation against recombination. Thereafter, diffusion/ drifting process of free carriers was counted to follow. This method enables to examine readily the photocurrent generated alongside the charge generation efficiency. The field and temperature dependences of the efficiency and photocurrent were obtained comparable to Onsager’s and experimental data.

• 한국시뮬레이션학회논문지
• /
• 제28권1호
• /
• pp.11-21
• /
• 2019

무기효과 산출을 위해 모델링 및 시뮬레이션 방법을 많이 사용하고 있다. 포병탄에 대한 무기효과 산출도 일부 진행되었으나, 장약의 선택에 따른 영향에 관한 연구는 부족하였다. 따라서 본 논문에서는 장약에 기반한 포병탄 EFD 산출모형을 제시하고, 장약의 선택에 따른 3차원 건물표적에 대한 무기효과의 차이를 확인하고자 한다. 우선 산출모형의 입력데이터를 수집하고, 제시한 모형을 이용하여 요망효과 달성을 위한 발사탄수를 산출하였다. 마지막으로 제시된 모형의 검증을 위해 대응표본 t-검정을 실시하였다.

• 대한기계학회논문집B
• /
• 제26권2호
• /
• pp.227-237
• /
• 2002

A numerical technique for simulating the aggregation of charged particles was presented with a Brownian dynamic simulation in the free molecular regime. The Langevin equation was used for tracking each particle making up an aggregate. A periodic boundary condition was used for calculation of the aggregation process in each cell with 500 primary particles of 16 nm in diameter. We considered the thermal force and the electrostatic force for the calculation of the particle motion. The electrostatic force on a particle in the simulation cell was considered as a sum of electrostatic forces from other particles in the original cell and its replicate cells. We assumed that the electric charges accumulated on an aggregate were located on its center of mass, and aggregates were only charged with pre-charged primary particles. The morphological shape of aggregates was described in terms of the fractal dimension. In the simulation, the fractal dimension for the uncharged aggregate was D$\_$f/ = 1.761. The fractal dimension changed slightly for the various amounts of bipolar charge. However, in case of unipolar charge, the fractal dimension decreased from 1.641 to 1.537 with the increase of the average number of charges on the particles from 0.2 to 0.3 in initial states. In the bipolar charge state, the average sizes of aggregates were larger than that of the uncharged state in the early and middle stages of aggregation process, but were almost the same as the case of the uncharged state in the final stage. On the other hand, in the unipolar charge state, the average size of aggregates and the dispersion of particle volume decreased with the increasing of the charge quantities.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.138-142
• /
• 2019

As the NAND flash memory goes to 3D vertical Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) structure, the lateral charge migration can be critical in the reliability performance. Even more, with miniaturization of flash memory cell device, just a little movement of trapped charge can cause reliability problems. In this paper, we propose a method of predicting the trapped charge profile in the retention mode. Charge diffusivity in the charge trapping layer (Si₃N₄) was extracted experimentally, and the effect on the trapped charge profile was demonstrated by the simulation and experiment.

• 한국정보통신학회논문지
• /
• 제16권2호
• /
• pp.319-324
• /
• 2012

본 논문에서는 개선된 charge pump 회로를 이용하여 구성한 2-dimensional 터치스크린 패널 드라이버를 소개한다. 개선된 전정 센싱 회로는 charge pump 회로의 중간노드 전하 축적을 제거하여 출력 전압 표류 현상을 효과적으로 없앤다. 터치 패널 드라이버는 터치를 감지하는 아날로그 센싱 부분과 감지된 신호를 처리하는 디지털 신호 처리 부분으로 이루어진다. 제안된 터치스크린 드라이버의 동작을 확인하기 위하여 혼성 모드로 회로를 구성하고 Cadence Spectre를 이용하여 그 동작을 검증하였다. 디지털 회로 부분은 Verilog-A로 모델링하여 아날로그 회로와 인터페이스가 가능하게 하여 전체 회로 동작을 검증함으로써 혼성모드 회로 동작의 신뢰성을 확보하였고 시뮬레이션 시간을 단축할 수 있었다. 시뮬레이션 결과 개선된 전정 센싱 회로를 이용한 제안된 구조의 터치 패널 드라이버의 안정적인 동작을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1788-1790
• /
• 1997

It is necessary to know the accurate field distribution around the high power apparatus, in designing it. To calculate the field around electrodes, we use the Charge Simulation Method(CSM) among several numerical methods and develop the new "Field Analysis System", by which we can draw the shape of electrodes, save the drawing in ascii code and apply CSM on the data. In the Field Analysis System, we try several rules for arrangement of simulation charge on CSM and consider their accuracy.