• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.2
• /
• pp.303-311
• /
• 2004

The purposes of this study were to investigate characteristic changes on nonwoven fabric by the charcoal printing. It separate grind charcoal as two different size of particles 45-52${\mu}{\textrm}{m}$ and 53-65${\mu}{\textrm}{m}$ for hand screen printing on three kind of nonwoven fabrics. To examine the effect of charcoal printing on nonwoven fabric were to obselve surface changes by a scanning electron microscope, dyeability by using spectrophotometer, moisture regain by oven method, air permeability, anion property, deodoriration and antibacterial activity. The results were as follows： When charcoal powder concentration increased from 3 to 9％, K/S value also increased from 3.06 to 8.55. When charcoal concentration increased, moisture regain also increased. In same concentration, moisture regain occurred higher as particle of small size. Air permeability decreased when the charcoal printing concentration increased. Anion occurrence appeared 140-160ion/cc from three different kinds of nonwoven fabrics in 3％ and 9％ charcoal concentration. Therefore, occurred anion ineffectively. In concentration of 3％, rate of deodorization measured as 89％, 83％ and 87％, and 9％ concentration caused 96％, 86％ and 93％ of high deodorization. Antibacterial activity examination in nonfinished nonwoven fabric resulted range of 60％, however, 3％ and 9％ concentration finished nonwoven fabric resulted 99.9％ of excellent antibacterial activity.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.1
• /
• pp.8-18
• /
• 2005

Adsorption capacity for the charcoal were tasted in this study to verify the performance of them for the use of the sampling media in industrial hygiene field. Two set of experiments were conducted. The first experiment was to test performance of the tested charcoal tube that were assembled in the laboratory with the use of the GR grade charcoal. The other tests were investigate the adsorption capacity of the charcoal tested in this study and charcoals embedded in the commercial charcoal tubes. Known air concentration samples for benzene, toluene, and o-xylene were prepared by the dynamic chamber. 1. At low air concentration levels (0.1${\times}$TLV), there was no significant differences between the tested charcoal tubes and the SKC charcoal tubes. This implies that there is no defect with the adsorption capacity of the charcoal. 2. At high concentration with 60 minutes sampling, the breakthrough were found only in the tested charcoal while no breakthrough were shown in the SKC charcoal. 3. From the breakthrough tests for the charcoal, the micropore volume(Wo) were calculated by the curve fitting with the use of Dubinin/Radushkevich(D/R) adsorption isotherm equation. The calculated values were 0.687cc/g for SKC, 0.504cc/g for Sensidyne, and 0.419cc/g for the tested charcoal(Aldrich). 4. Adsorption capacities were obtained from the isotherm curves shown adsorption capacities at several levels of the challenge concentration. All range of the air concentration concerned in industrial hygiene, the SKC charcoal showed approximately two times of adsorption capacity compared to the tested charcoal.

• Safety and Health at Work
• /
• v.9 no.4
• /
• pp.416-420
• /
• 2018

Background: Urinary 1-hydroxypyrene (1-OHP) has been widely used as a biomarker of polycyclic aromatic hydrocarbons (PAHs) in occupationally exposed workers. The objective of this study is to investigate the concentration of urinary 1-OHP among charcoal workers as subjects and non-charcoal workers as controls. Methods: Early morning urine samples were collected from 68 persons (25 charcoal workers in Igbo-Ora, 20 charcoal workers in Alabata, and 23 non-charcoal workers) who volunteered to participate in this study. 1-OHP determination in urine samples was carried out using high performance liquid chromatography after hydrolysis. Descriptive and inferential statistics were used for data analysis at p < 0.05. Results: The mean urinary 1-OHP concentration (${\mu}mol/mol$ creatinine) among charcoal workers at Igbo-Ora and Alabata and non-charcoal workers were $2.22{\pm}1.27$, $1.32{\pm}0.65$, and $0.32{\pm}0.26$ (p < 0.01). There existed a relationship between respondent type and 1-OHP concentration. Charcoal workers were 3.14 times more at risk of having 1-OHP concentrations that exceed the American Conference of Governmental Industrial Hygienists guideline of $0.49{\mu}mol/mol$ creatinine than non-charcoal workers (relative risk = 3.14, 95% confidence interval: 1.7-5.8, p < 0.01). Conclusion: Charcoal workers are exposed to PAHs during charcoal production and are at risk of experiencing deleterious effects of PAH exposure. Routine air quality assessment should be carried out in communities where charcoal production takes place. Assessment of urinary 1-OHP concentration and use of personal protective equipment should also be encouraged among charcoal workers.

• Korean Journal of Plant Resources
• /
• v.15 no.1
• /
• pp.57-61
• /
• 2002

This study was conducted to investigate the effect of activated charcoal on growth and yield of medicinal plants in different degree of activated charcoal concentration. The results obtained are summarized as follows. Stem length was shown the longest in activated charcoal of 20%, but shorter in control. Also stem diameter was shown the thickest in activated charcoal of 20%, but thinner in control. Length and thickness of main root and thickness of main root were good in activated charcoal of 20%. Quality and yield of medicinal plants were the highest in activated charcoal of 20%. Therefore, optimum consistency of activated charcoal was 20%.

• The Research Journal of the Costume Culture
• /
• v.12 no.6 s.53
• /
• pp.1010-1020
• /
• 2004

The purposes of this study were to investigate characteristic changes on nonwoven fabric by the charcoal and the yellow soil printing. It separate the grind charcoal and the yellow soil as two different size of particles $45{\sim}52{\mu}m\;and\;53{\sim}65{\mu}m$ for hand screen printing on three kind of nonwoven fabrics. To examine the effect of the charcoal and the yellow soil printing on nonwoven fabric were to observe surface changes by a scanning electron microscope, dyeability by using spectrophotometer, moisture regain by oven method, deodorization and antibacterial activity. The results were as follows: When the charcoal and the yellow soil powder concentration increased from 3 to $9\%$ or from 5 to $10\%$, K/S value also increased from 3.06 to 8.55 or from 1.14 to 1.80. The charcoal and the yellow soil moisture regain also increased. In same concentration, moisture regain occurred higher as particle of small size. In concentration of charcoal $3\%$, rate of deodorization measured as $89\%,\;83\%\;and\;87\%,\;and\;9\%$ concentration caused $96\%,\;86\%\;and\;93\%$ of high deodorization. In concentration of 5, $10\%$ of yellow soil, rate of deodorization measured as $85\%$ over. Antibacterial activity examination in nonfinished nonwoven fabric resulted range of $60\%$, however, $3\%\;and\;9\%$ concentration finished nonwoven fabric resulted $99.9\%$ of excellent antibacterial activity. Also $5\%,\;10\%$ yellow soil concentration was appeared same resoult.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.1
• /
• pp.95-100
• /
• 2014

Objectives : The purpose of the present study was to investigate the effect of bamboo charcoal on Streptococcus mutans which is one of the most important causative agents of dental caries. Methods : S. mutans was incubated with or without bamboo charcoal and then changes were observed in its cell viability and antibacterial effect. Oral epithelial cells viabillity(human gingival fibroblast, HGF) was performed using MTT assay. Antibacterial effect was analyzed using a dilution plating method and agar diffusion method. Results : Oral epithelial cells, human gingival fibroblast (HGF) showed a tendency to increase in bamboo charcoal treatment solution concentrations(0.5, 1, 2, 3, 5, 10%). The bamboo charcoal had an antibacterial effect on S. mutans. Antibacterial effect of bamboo charcoal for the bacterium was 58%. Charcoal concentration of 2% and 5% in the inhibition zone showed a minimal growth, but the concentration of 10% bamboo charcoal in inhibition zone revealed a conspicuous antibacterial activity. Conclusions : Overall results suggested that the bamboo charcoal proved to be bactericidal effect on S. mutans.

• Fashion & Textile Research Journal
• /
• v.18 no.4
• /
• pp.531-539
• /
• 2016

Charcoal dyed fabrics have been widely used in home textiles and functional clothing due to their anti-statics, antibacterial, deodorization, far infrared emitting and anion releasing. Soybean fiber were regenerated from soybean. Soybean fiber have biodegradable, microbiocidal, non-allergic, and anti-ageing properties. The purpose of this study is to investigate the dyeing characteristics of soybean fabric using charcoal as colorants. Soybean fabrics were dyed with charcoal solution according to concentration of charcoal, dyeing temperature, and dyeing time. To improve washing fastness and investigate mordanting condition, soybean fabric and dyed soybean fabric with charcoal were mordanted by mordanting agents such as $CH_3COOH$(acetic acid), NaCl(sodium chloride) and $AlK(SO_4)_2{\cdot}12H_2O$(Aluminium Potassium Sulfate). Dyeability and color characteristics of charcoal dyed soybean fabric were obtained by computer color matching and SEM morphology analysis. Particle size of charcoal and color fastness were also investigated. The results obtained were as follows; Mean average diameter of charcoal was $1.39{\mu}m$. The dyeability of soybean fabric using charcoal as colorants was increased gradually with increasing concentration of charcoal dyeing solution and saturated at about 8%(o.w.b.). The optimum dyeing temperature and dyeing time were $90{\sim}105^{\circ}C$ and 60~90 minutes respectively. The overall wash fastness at dyeing concentration 2~4%(o.w.b.) and 6~10%(o.w.b.) were 4 degree and 3-4 degree respectively. The fastness to washing according to mordanting method indicated good grade result as more than 4 degree in all conditions. On the other hand, the staining of adjacent fabrics, i.e. PET, Acryl, Wool, Acetate, Nylon and Cotton was found to be of grade 4 or 4-5 in all conditions.

• Journal of the Korea Furniture Society
• /
• v.22 no.1
• /
• pp.13-17
• /
• 2011

Recently, interest in indoor air quality is increasing. Especially, radon radioactivity among the indoor air is a well-known risk factor for lung cancer because of ionizing radiation in the form of ${\alpha}$-particles. This study was carried out to investigate effect of black charcoal and activated carbon for reduction of radon radiation that emitted from building materials. Black charcoal and activated carbon were used as a barrier which was against the infiltration of radon. The source of radon was gypsum board. Two types of charcoal barrier were powder- and board-type with 5 mm, 10 mm thickness respectively. The method for this determination is evaluated radon concentration in chamber. The measurements were performed with radon detector, SARAD3120. Results of this study are as following: Black charcoal and activated carbon confirmed the highly efficient barrier. Radon concentration was reduced from 72% to 85% as compared the control chamber. Radon reduction capability, however, was no difference as barrier's types. Results obtained in ventilation condition, radon concentration shows 5.93 pCi/L on average in the closed condition and shows 2.69 pCi/L in the opened condition.

• Journal of Environmental Health Sciences
• /
• v.37 no.1
• /
• pp.50-56
• /
• 2011

The adsorption capacity of charcoal is a function of the airborne concentration of the target chemical. To evaluate the adsorption capacity of charcoal packed in the cartridges of air purifying respirators, breakthrough tests were conducted with carbon tetrachloride for three commercial cartridges (3M models #7251, #6000 and AX) at 25, 50, 100, 250 and 500 ppm. Adsorption capacities were calculated using a mass transfer balance equation derived from the curve fitting to the breakthrough curves obtained experimentally. Carbon micropore volumes were estimated by iteration to fit the Dubinin/Radushkevich (D/R) adsorption isotherm. They were 0.6566, 0.5727 and 0.3087 g/cc for #7251, #6000 and the AX cartridge, respectively. Above 100 ppm (at high challenge concentrations), #7251 and #6000 showed higher adsorption capacities. However, as the challenge concentration decreased, the adsorption capacities of #7251 and #6000 sharply dropped. On the other hand, the adsorption capacity of the AX cartridge showed little change with the decrease of the challenge concentration. Thus, the AX showed a higher adsorption capacity than #7251 and #6000 at the 5-50 ppm level. It is concluded that service-life tests of cartridges and adsorption capacity tests of charcoal should be conducted at challenge concentration levels reflecting actual working environmental conditions. Alternatively, it is recommended to use the D/R adsorption isotherm to extrapolate adsorption capacity at low concentration levels from the high concentration levels at which breakthrough tests are conducted, at a minimum of two different concentration levels.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.803-809
• /
• 2004

In order to activate the characteristics of charcoal in fiber systems, this was carried out to experiment with the particle size from two micrometers to ten micrometers of charcoal powders on cotton fabrics. The results obtained were as follows; The fabrics were dyed with gray colors by charcoal. The K/S values, that were indicative of the dye affinity, became higher as the increase of dyeing temperature, dyeing time, and dyeing concentration. Also it was confirmed the morphology of the fiber surfaces adsorbed with the particle size from two micrometers to four micrometers of charcoal powder by scanning electronmicronscope. The cotton fabrics dyed by charcoals generally recorded 3-4 degree of wash fastness, 4-5 degree of dry-cleaning fastness, 4-5 degree acidic and alkaline perspirations and water fastness. In connection with the functional properties, cotton fabrics dyed with charcoal appeared that antibacterial, deodorization, far infrared emissivity were improved. Especially the deodorization was improved greatly by using charcoal.