• 제목/요약/키워드: characteristics of mind

검색결과 486건 처리시간 0.03초

청소년 성교육을 위한 성성(性性)의 재개념화 커리큘럼 모색 : N번방 시대, 여성신학적 관점에서 '몸'과 '성'을 새롭게 이야기하다 (Searching for a Curriculum to Reconceptualize Sexuality for Youth Sex Education : Nth Room Era, New Talk of 'Body' and 'Sex' from a Feminist Theological Point of View)

  • 이주아
    • 기독교교육논총
    • /
    • 제67권
    • /
    • pp.301-337
    • /
    • 2021
  • 연구자는 현대 한국 사회에 큰 충격을 던져주었던 N번방 사건을 계기로 한국 청소년성교육을 둘러싼 각종 논쟁들과 시각의 차이를 살펴보았다. 한국 청소년 성교육은 학교 성교육과 및 청소년성문화센터를 통해 이루어지는 공적 성교육과 보수적·전통적 개신교 성교육으로 나누어질 수 있다. 공적 성교육은 여성주의 성윤리 및 해외의 포괄적 성교육의 영향을 일부 받아 성인지 감수성 및 성적 자기 결정권을 기본으로 성희롱, 성매매, 성폭력, 가정폭력 예방의 4가지 예방을 주요 사업으로 실시 중이다. 단, 학교 성교육표준안은 성역할 고정관념 및 성차별적 내용, 성폭력에 대한 왜곡된 통념 강화 및 성적 다양성과 다양한 가족 형태의 배제 등으로 비판받았으며, 청소년성문화센터 교육의 일부 내용 역시 마찬가지의 비판을 받고 있다. 보수적·전통적 개신교는 양성에 의한 결혼 등의 정상 가족 이데올로기와 혼전순결주의, 결혼 관계 안에서만 인정되는 성관계 윤리 등을 기본으로 하여 청소년들에게 피임법을 성에 대한 생물학적이고 의학적 지식을 가르치는 것-피임법 등-에 대해 강하게 반대하면서 공적 성교육과 대치하는 형태를 이루고 있다. 연구자는 한국 청소년 성교육을 위한 커리큘럼을 구성하면서 먼저 공적 성교육, 보수적·전통적 개신교 성윤리와 성교육, 여성주의 성윤리와 성교육, 해외 청소년성교육의 특징을 각각 분석하였다. 그리고 청소년 성교육의 보다 근본적인 해결책으로 금욕주의나 혼전순결주의, 성인지 감수성과 성적 자기결정권 교육으로는 한계가 있음을 지적하면서 이의 대안을 여성신학에서 말하는 몸과 성 개념에서 찾았다. 연구자는 다양한 여성신학자의 연구를 중심으로 왜곡된 성인식과 성문화는 이원론적 성과 몸 이해가 가장 근본적인 원인이라는 인식 하에 몸과 성에 대한 재개념화가 필요하다고 지적하며 이를 통전적 성, 타인과의 관계 속에서 이해되는 상호연대적인 성, 전 지구적인 공동체로 확장되는 영성으로서의 성 개념의 세 가지로 개념화하였다. 그리고 각각의 영역을 위한 교육과정으로 1)통전적 성: 호흡하기, 내러티브, 자신의 몸과 마음의 형태를 만들어보기 2)타인과의 관계성 안에서 이해되어지는 상호연대적인 성: 다른 사람의 호흡 느껴보기, 의식화를 통한 미디어 리터러시, 선한 바람 보내기 3)전 지구적 관심으로 확장되는 영성으로서의 성: 자연에 주의를 기울이고 공동 경작하기, 지구의 신음을 듣고 새로운 삶의 형식 만들어가기, 지구 및 동료 생명체들과 함께 하는 기도문 작성하기로 제안하였다.

동양성 기반의 디자인 교육의 새로운 플랫폼 (New Platform of Orientalism-Based Design Education)

  • 최경란
    • 한국과학예술포럼
    • /
    • 제20권
    • /
    • pp.455-464
    • /
    • 2015
  • 최근 미래 사회의 창조적 인재를 양성해야할 한국의 디자인 교육의 발전에 대한 인식이 확대되면서 다양한 지원 및 육성전략이 제시되고 있다. 본 연구는 창의적 인재양성을 위한 디자인 교육의 동양성 기반의 새로운 디자인 교육 플랫폼을 제안한다. 창의적 인재 양성의 경쟁력을 갖기 위해서는, 창의적인 인재상을 양성할 수 있는 시스템 및 교육 프로그램의 지원이 필요하다. 본 연구의 목적은 디자인 교육의 방향전환을 위한 새로운 플랫폼을 제시하고, 그 구체적인 방안을 모색하는 것이다. 연구방법은 다음과 같은 순서로 기술한다. 첫째, 연구의 배경 및 범위에 관해 기술하였다. 문헌조사와 한국디자인 교육의 위기의 현황을 (한국 산업 통계 조사)를 기초로 현재 현황과 특성을 기술하였다. 둘째, 정보화 시대에 사라지게 될 교육 및 디자인 교육방향 전환과 새로운 플랫폼에 관해 기술하였다. 현재는 지식기반 산업 성장전략을 우선시하는 전략으로 변화됨을 기술하였다. 셋째, 6가지 미래 인재의 조건과 아시아적 사고와 가치지향으로 바뀌는 상황에서 미래 디자인 교육이 동양성 기반의 창의력이 중심이 되어야 하고, 그를 위해서 어떠한 방안을 모색해야 할지를 서술하였다. 대학의 교육의 방향과 프로그램의 구성안을 구체적인 방안을 모색함을 중심으로 제안하였다. 넷째, 본 연구에서 기술한 내용을 중심으로 디자인 클러스터의 네트워크를 통한 실천방향을 종합적으로 기술하고 시사점을 도출하였다. 결론적으로 최근 동양성 기반의 정신을 중심으로 한국 디자인교육의 스스로의 정체성을 찾고 디자인 교육프로그램에서 경쟁력을 확보할 수 있는 방안을 제시하였다. 확보방안은 네트워크의 통합적인 시스템 혁신이다. 디자인 클러스터, 대학, 디자이너, 스튜디오, 정책 기관, 디자인 단체, 기업, 미디어, 페어를 적극적으로 활용하여 지속가능한 교육시스템 및 실천적 방법을 제시한다.

민담 '주인집을 망하게 한 하인'의 분석심리학적 이해: 트릭스터 원형을 중심으로 (An Interpretation of the Folktale 'the Servant Who Ruined the Master's House' from the Perspective of Analytical Psychology: Centering on the Trickster Archetype)

  • 노명선
    • 심성연구
    • /
    • 제37권2호
    • /
    • pp.184-254
    • /
    • 2022
  • 본 논문을 통해 한국 민담 '주인집을 망하게 한 하인'의 심리학적 의미를 고찰하였다. 민담 속 주인과 하인의 대립은 보편적인 인간 정신의 문제로, 경화된 기존의 집단적 의식과 이를 보상하고 갱신하려는 새로운 의식의 대립으로 볼 수 있다. 다른 각도에서 설명해보자면 인간의 정신적인 측면과 본능적인 측면 사이의 혹은 의식과 무의식 사이의 대립이며, 자아와 그림자 사이의 대립이라고도 할 수 있다. 민담 속 주인은 애먹이는 막내 하인을 없애버리려 여러 차례 시도하지만, 하인은 꾀와 속임수를 써서 주인으로부터 음식과 말(馬), 막내 누이, 전 재산, 마침내 목숨까지 빼앗아 버리고, 이야기는 막내 하인과 막내 누이의 혼인 생활로 끝을 맺는다. 주인이 죽고 하인이 새로운 주인이 되는 대극반전(enantiodromia)은 낡은 집단적 의식이 파괴되고 집단적 무의식으로부터 올라온 새로운 의식이 지배적 위치에 서게 되는 것으로, 개인의 심리적 상황에서는 기존의 자아의 태도가 해소되고 새로운 태도로 변환되는 것으로 이해해볼 수 있다. 이야기의 중간 과정에서 하인은 그를 죽이려고 주인이 써준 등편지를 순박한 사람들을 이용해 새롭게 바꿔 써서 막내 누이와 혼인한다. 이 모습은 집단적 의식의 도덕관념에서는 부정적으로 이해될 수 있으나, 아낙네, 꿀장수, 배고픈 중으로 상징되는 조선 시대 집단적 의식에서 무시되어오던 정신요소를 통합하는 과정으로 볼 수 있다. 하인으로 대변되는 새로운 의식성은 기존의 틀에 구속받지 않는 트릭스터적 특성을 갖기에 집단적 의식에서 무시되어온 정신적 내용을 통합하여 조선 후기 집단적 의식에 대한 보상과 대안으로서 제시하는 요소라고 할 수 있다. 주인은 다시 하인을 죽이려고 하인을 가죽 부대에 넣어 나무에 매다는데, 가죽 부대 속에 들어가 매달렸더니 눈을 떴다는 하인의 속임수에 넘어간 소경이 대신 매달려 죽고 하인은 달아나게 된다. 주인과 하인의 대극 문제가 마침내 나무로 상징되는 전체 정신(Self)에 맡겨지자 소경이 제거되는 것은 트릭스터에 포함되어있는 맹목성, 어리석음, 탐욕적 요소를 구분하고 정화하려는 자기(Self)의 의도로 이해해볼 수 있다. 이런 과정들을 거쳐 집단적 의식의 새로운 변화 혹은 새로운 자아의 태도를 상징하는 하인은 기존의 문제들을 해결하고 주인의 자리에 서게 된다. 그러나 꾀 많은 하인의 활약상을 들으며 청중들은 유쾌함과 해방감을 느끼는 한편, 소경이 대신 죽고 주인집 식구가 몰살되고 하인이 주인이 되는 부분에서는 하인의 위험성과 통제 불가능에 대한 우려와 두려움의 감정을 경험하기도 한다. 해외 유화들에 등장하는 트릭스터들 역시 철저히 이기적이고 오직 욕구를 채우고 위험에서 빠져나가기 위해 무고한 존재들을 속이거나 죽게 만드는데, 이들 트릭스터를 처단하거나 교화하려는 노력은 허사로 돌아가고 그들은 달아나버린다. 그러므로 본 민담 역시 이런 원형적 그림자가 매우 위험하다는 것, 그리고 의식이 통제하거나 의식에 동화될 수 없다는 것을 알게 해주고, 그것을 외경하고 관조하도록 하는 목적 의미도 있다고 볼 수 있다. 트릭스터는 기존의 구조와 질서가 경화되었을 때 보상작용으로서 무의식으로부터 올라오는 재생시키는(revivifying) 자연 에너지의 비합리적 발현 양상이다. 그 현상은 기존의 집단적 정신의 입장에서는 파괴적이고 비도덕적일 수 있으나, 도덕적으로 규정할 수 없는 보다 근원적 정신인 집단적 무의식의 기능이라고 보아야 한다. 트릭스터 원형상으로 볼 수 있는 하인은 변환을 가져오는 존재로 파괴성과 창조성이라는 양면성과 모순성을 지니고 있다. 본 민담의 유화들의 결말은 여러 갈래인데 이는 트릭스터의 양면성으로 인해 청중의 마음 반응이 그만큼 다양하다는 것을 반영하며, 트릭스터 문제에 대한 무의식의 다양한 반응을 제시하는 것이기도 하다. 또한 트릭스터란 그만큼 결론이 안 나고 논란을 일으키는 모순덩어리 존재로 의식적 합리적 태도로 통제할 수 없다는 것, 우리 안의 트릭스터 원형에 대해 진지하게 관조할 수 있을 뿐이라는 것을 보여준다.

'도죽장, 부채, 거문고'를 통해 본 서경덕의 선비적 풍모와 기철학적 특징 (Exploring the characteristics of Seo Kyung-duk's a man of virtue and Ki(氣) philosophy through 'the dojookjang[bamboo cane], the buchae[fan], and the k?mungo[Korean lute])

  • 황광욱
    • 한국철학논집
    • /
    • 제59호
    • /
    • pp.261-286
    • /
    • 2018
  • 동양적 전통에서는 다양한 문체로 사물과 대화할 수 있지만 특히 시(詩), 명(銘), 부(賦)가 그런 경향이 두드러진다. 말은 입이 하는 것이 아니라 마음, 영혼이 하는 것이다. 따라서 어떤 사물과 함께 있는지가 그 사람을 규정하는 겉이라면, 사물과 어떤 대화를 했는지는 그 사람의 속이다. 겉과 속은 분명 다르지만, 그렇다고 속없이 겉이 없고, 겉이 없이 속도 없다. 그래서 그 사람이 어떤 사물과 함께 했는지를 알면 그의 겉을 상상할 수 있고, 사물과 어떤 대화를 했는지를 알면 속에 들어가 볼 수 있다. 빈한한 삶을 살았던 서경덕이지만 사물 없이 살 수는 없기에 그의 사물이 전무하지는 않다. 서경덕은 여러 사물 가운데 도죽장, 부채, 거문고에 대해 특별하게 기록해 두었다. 부채를 든 서경덕, 도죽장을 짚은 서경덕, 거문고를 품고 있는 서경덕. 우리가 상상해볼 수 있는 그림들이다. 도죽장에 투영된 서경덕은 백성의 곤궁과 험한 세상을 구제해야 한다는 현실 참여적 모습을 보이고 있다. 부채에 비춰지는 서경덕은 백성의 어려움을 씻어줘야 하는 현실적 선비의 모습과 함께 존재의 근원을 탐구하는 철학자이다. 거문고에서 찾을 수 있는 서경덕은 현상과 근원, 체와 용, 형이상과 형이하, 유형과 무형을 일기(一氣)로 파악하는 기철학자이다. 도죽장, 부채, 거문고를 통해 본 서경덕은 세상의 아픔을 걱정하고 좋은 세상을 이루어야 한다는 현실감을 지닌 선비이고, 존재의 근원을 파고드는 철학자이며, 기(氣)의 논리로 요순의 통치가 이루어질 수 있음을 확신하는 이상가이기도 한다.

동무공(東武公)의 형상관(形象觀)과 사상의학(四象醫學)의 형상의학정신(形象醫學精神) (The Morpho-Imaganary Viewpoints of Lee Je-ma and the Morpho-Imaganary recognitions of Sasang Constitutional Medicine)

  • 송일병
    • 사상체질의학회지
    • /
    • 제11권1호
    • /
    • pp.1-13
    • /
    • 1999
  • 1. 연구목적 동무(東武) 이제마공(李濟馬公)은 그의 의학 연원을 사상인(四象人)의 직복성리(職服性理)와 외형(外形)을 얻어 의학을 완성하게 되었음을 밝히고 체질변중(體質辨證)에 체형기상(體形氣像)과 용모사기(容貌詞氣)의 취상변증(取象辨證) 방법을 제시하며 형증(形證)을 이용한 기(氣)의 상태를 제시하고 있어 동무공(東武公)의 형상관(形象觀)을 정확히 이해하고 사상의학(四象醫學)에서 형상의학정신(形象醫學精神)을 파악하는 것이 본 논고의 목적이다. 2. 연구방법 동무 철학의 바탕이 되는 사심신물논적(事心身物論的) 형상관(形象觀)은 "周易(주역)"의 형(形)과 상(象)에 대한 인식과 유학에서 "시경(詩經)"의 유물유칙(有物有則)의 정신과 "중용(中庸)"의 성(誠)과 물(物)에 대한 위물불이(爲物不二)의 인식에서 비롯되었다고 보고 동무공(東武公)의 형상관(形象觀)의 배경을 "주역(周易)", "시경(詩經)", "중용(中庸)", "주자전서(周子全書)", "격치고(格致藁)", "동무유고(東武遺藁)", "동의수세보원사상초본권(東醫壽世保元四象草本卷)", "동의수세보원(東醫壽世保元)"을 통해 살펴보기로 한다. 또한 "내경(內東)". "동의보감(東醫寶鑑)"의 형상의학정신(形象醫學精神)과 사상의학(四象醫學)의 형상의학정신(形象醫學精神)을 비교해 보고자 한다. 3. 연구결과 및 결론 위의 고찰을 통해 다음과 같은 연구 결과를 얻었다. 1. 동무공(東武公)의 형상관(形象觀)은 "주역(周易)"의 유교적(儒敎的) 해석(解析)의 도입과정(導入過程)에서 나왔고 "중용(中庸)"에 나타난 복물(覆物), 재물(載物), 성물(成物)에 대한 사상적(四象的) 확대 해석과 "주역(周易)"의 취상(取象) 정신과 "중용(中庸)"의 '위물불무(爲物不武)'의 정신을 발전시킨 인성인형(人性人形)의 배경에서 이루어진 사물에 대한 새로운 인식체계이다. 2. "주역(周易)"은 천지인(天地人)을 음양(陰陽)으로 해석하여 수리(數理), 괘상(卦象)을 통해 사물(事物)의 변화(變化)와 길흉(吉凶)을 인식하는 음양적(陰陽的) 형상관(形象觀)이나 동무공(東武公)은 이이표상(裡理表象)의 사상적(四象的) 요약정신(要約精神)으로 사물(事物)을 설명하는 사상적(四象的) 형상관(形象觀)이다. 3. "중용(中庸)"은 인성(人性)을 성(誠)으로 보고 이를 물성(物性)까지 확대하여 인간과 우주를 설명하는데 동무공(東武公)은 이를 발전시켜 인성인형(人性人形)의 형상관(形象觀)을 완성하고 인성(人性)을 직부성리(職腑性理)로 발전시켜 인간의 몸과 우주의 본체를 이해하고자 하였다. 4. 동무공(東武公)의 형상관(形象觀) 요약 정신에는 대소원근(大小遠近)의 차별 정신과 구조(構造)와 기능(機能)의 요약 정신이 있으며, 이이(裡理)의 성리(性理)나 표상(表象)의 물상(物象)에서도 사심신물적(事心身物的) 구조와 기능의 요약정신이 존재(存在)한다. 5. "내경(內經)"의 형상의학정신(形象醫學精神)은 음양논적(陰陽論的) 인식 방법을 통해 기(氣)와 형(形)을 인식하며 기상형표(氣喪形表)를 언급하나 이를 체계화하지는 못했으며 인(人)의 구분에서도 음양(陰陽)과 기혈(氣血)의 다소(多少)를 통한 인식방법과 오행(五行)에 근거한 오태인론적(五態人論的) 인식 방법을 제시하고 있다. 6. "동의보감(東醫寶鑑)"의 형상의학정신(形象醫學精神)은 "황정경(黃庭經)"의 영향을 받은 도가적(道家的) 시각에 근거한 형(形)과 기(氣)중심의 "신형편(身形篇)" 정신(精神)이 있고 상한(傷寒)의 병증(病證)과 기타 병증(病證)에서 형증병증(形證病證) 개념의 도입을 시도하였다. 7. 이제마는 사심신물적 형상관(形象觀)을 의학(醫學)에 도입하여 형상의학을 완성하였고 체질(體質)과 체질병증(體質病證)을 기능(機能)과 구조(構造)의 발현적 정신으로 설명하고 병리에 대한 동출일속(同出一屬)의 원인적(原因的) 속성과 병증(病證)의 경중완급(輕重緩急)에 대한 객관적 변정동화(變靜動化)를 직관적(直觀的) 방법으로 설명하고자 하였다. 8. 동무공(東武公)의 형상관(形象觀)은 기존 음양론(陰陽論)의 이분법적(二分法的) 설명 방법의 한계를 극복하기 위해 이이(裡理)와 표상(表象)에서 모두 사심신물(事心身物)의 사상적(四象的) 요약(要約) 정신(精神)으로 사물(事物)을 인식하는 새로운 방법을 제시하였다.

  • PDF

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하;최재갑
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.17-48
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

  • PDF

『동의수세보원(東醫壽世保元)』 태소음양인(太少陰陽人)의 「병증론(病證論)」에 관(關)한 연구(硏究) (The Study about 「The Discourse on the Constitutional Symptoms and Diseases」 of Sasangin on the 『Dongyi Suse Bowon』)

  • 이수경;송일병
    • 사상체질의학회지
    • /
    • 제11권2호
    • /
    • pp.1-26
    • /
    • 1999
  • 1. 연구 목적 사상의학(四象醫學)의 체질증(體質證)과 체질병증(體質病證)의 접근에는 기존 증치의학(證治醫學)과는 다른 통증(痛症)에 대한 시각을 제시하고, 사상의학(四象醫學) 고유 술어로 병리(病理)나 병증(病證)을 설명하여 기존 개념과 혼돈되며, "성명론(性命論)", "사단론(四端論)", "확윤론(擴允論)", "장부론(臟腑論)"을 통해 제시한 인간관(人間觀)과 세계관(世界觀). 이들 간의 조직 원리가 "병증론(病證論)"을 통해 몸에 구현되므로 사상의학(四象醫學)의 병증용약(病證用藥)에 어려움을 느끼게 된다. 그러나 사상의학(四象醫學)도 기존의 증치의학(證治醫學)을 바탕으로 하고 있어 기존의 의학에서 사상의학(四象醫學)이 성립되는 과정과 이제마(李濟馬)의 인간관으로 "병증론(病證論)"을 접근하여 사상의학(四象醫學)의 체질증(體質證)과 체질병증(體質病證)에 대한 정확한 이해를 돕고자 하였다. 2. 연구 방법 문헌적 구로 태소음양인(太少陰陽人)의 병증(病證)을 설명하기 위해 "상한론(傷寒論)", "활인서(活人書)" 등 인용 원서의 병증(病證) 인식(認識)과 이를 인용한 "동의보감(東醫寶鑑)"에서의 병증(病證)을 비교하고 이것이 태소음양인(太少陰陽人)의 체질증(體質證)과 체질병증(體質病證)으로 자리매김되는 과정을 파악하고 그 병리(病理)와 병증(病證)을 "동의수세보원(東醫壽世保元)"의 "성명론(性命論)", "사단론(四端論)", "확윤론(擴允論)", "장부론(臟腑論)"을 통해 드러나는 인간관의 체계로 파악하고자 하였다. 3. 결론 태소음양인의 병증론을 통해 표리병증의 인식 배경과 변화 과정 표리병증의 특징, 체질증과 체질병증의 출발점인 소증의 인식, 기존 의학과 다른 체질병증, 태소음양인의 병증의 특징 등을 살펴 사상의학 체질병증에 대한 결론을 얻어 보고하는 바이다.

  • PDF

칠곡 심원정원림의 공간구성과 경관특성 - '심원정 25영(心遠亭 二十五詠)'과 「심원정수석기(心遠亭水石記)」를 중심으로 - (Spatial Composition and Landscape Characteristics of Shimwon-Pavilion Garden in Chilgok - Focusing on 'Shimwon-pavilion Poem of 25 Sceneries' and 「Shimwon-pavilion Soosukgi(心遠亭水石記)」 -)

  • 김화옥;박율진;노재현;신상섭;조호현
    • 한국전통조경학회지
    • /
    • 제34권2호
    • /
    • pp.27-34
    • /
    • 2016
  • "기헌(寄軒)집"에 실린 "심원정수석기(心遠亭水石記)"의 '심원정 25영'을 바탕으로, 일제강점기인 1937년에 기헌 조병선에 의해 조성되고 향유된 칠곡 심원정원림의 공간구성과 경관특성을 고찰한 본 연구의 결과는 다음과 같다. 1. 심원정원림은 북쪽으로는 송림이 있는 '임수형(林藪型)'이자 원림 내부로 구야천이 흐르는 '계류형 별서원림'의 입지 특성을 공유하며 본제(本第)와는 직선거리로 약 400m 이격되어 있다. 2. 북쪽에는 가산(假山)인 학림산을, 동쪽과 서쪽에는 만경류를 올린 취병(翠屛)을, 남쪽으로는 구야천변의 석벽(隱屛)을 포치시키는 등 사방에 '가림'시설을 조성함으로써 위요공간 속에 은일을 추구한 기헌의 정신을 표출하고 있다. 3. 심성을 수양하는 선비의 소우주이자 거처로 조성되고 향유된 심원정원림은 송림사의 경역 내에 위치함으로써 불교사상을 수용하며, 도연명의 전원사상과 시선(詩仙)이라 불리는 이백의 낭만주적 감성을 통한 도가적 삶의 추구 그리고 주자의 성리학적 가치를 실현하는 통섭(統攝)의 장으로서의 면모를 엿볼 수 있다. 4. 심원정 25영 중 5영은 정운루 암수실 위류재 이열당 등의 용도가 다른 부속실과 이를 아우르는 정각인 '장수지소(藏修之所)' 심원정에 의탁되었으며 외원에 부여된 20영은 자연에 이름을 붙인 것 9개, 조성한 것 11개로 나뉘며, 자연에서 얻은 9영은 "석경기"에 기술된 바를 바위에 각인시켰다. 5. 현존하는 실내경물 4영은 편액으로, 원림내 경물 중 5개소는 바위글씨로 그리고 8개소는 표지석으로 각 경물이 인식되도록 의도했으나, 8개 영의 표식은 유실 및 훼철 등으로 확인되지 않는다. 6. 심원정 25영 중 '괴강(槐岡)'에는 학자수를 상징하는 회화나무, '유제(柳堤)'에는 도연명과 줄기찬 생명력을 상징하는 버드나무, '기천(杞泉)'에는 '가족의 단란함'을 상징하는 구기자나무 그리고 '동 서취병(東 西翠屛)'과 '방원(芳園)'에는 만경류와 초본류 등 다채로운 의미를 담는 식물경관이 등장한다. 또한 폭포(은폭(隱瀑)), 소(군자소(君子沼)), 못(양지(湯池)), 샘(기천(杞泉)), 바위를 가운데 두고 갈라 흐르는 물(반타석(盤陀石)) 그리고 바위 사이로 흐르는 물(수구암(水口巖)) 등 다채로운 수경관이 기도되었다. 7. 심원정원림은 수계 인접형 원림임에도 불구하고 11개 영을 직접 조성하는 등의 적극적인 개입이 두드러진다. 기존의 여타 정자원림이 가깝고 먼 곳에 자연 중심의 경(景)과 곡(曲)의 경물 설정에 충실한 곳이었다면, 심원정원림은 정자를 시점으로 의미 강화된 경물을 취경(聚景)하도록 유도된 적극적인 수경(修景)이 두드러진다.

서비스제공자와 사용자의 인식차이 분석을 통한 소셜커머스 핵심성공요인에 대한 연구: 한국의 티켓몬스터 중심으로 (A Study on the Critical Success Factors of Social Commerce through the Analysis of the Perception Gap between the Service Providers and the Users: Focused on Ticket Monster in Korea)

  • 김일중;이대철;임규건
    • Asia pacific journal of information systems
    • /
    • 제24권2호
    • /
    • pp.211-232
    • /
    • 2014
  • Recently, there is a growing interest toward social commerce using SNS(Social Networking Service), and the size of its market is also expanding due to popularization of smart phones, tablet PCs and other smart devices. Accordingly, various studies have been attempted but it is shown that most of the previous studies have been conducted from perspectives of the users. The purpose of this study is to derive user-centered CSF(Critical Success Factor) of social commerce from the previous studies and analyze the CSF perception gap between social commerce service providers and users. The CSF perception gap between two groups shows that there is a difference between ideal images the service providers hope for and the actual image the service users have on social commerce companies. This study provides effective improvement directions for social commerce companies by presenting current business problems and its solution plans. For this, This study selected Korea's representative social commerce business Ticket Monster, which is dominant in sales and staff size together with its excellent funding power through M&A by stock exchange with the US social commerce business Living Social with Amazon.com as a shareholder in August, 2011, as a target group of social commerce service provider. we have gathered questionnaires from both service providers and the users from October 22, 2012 until October 31, 2012 to conduct an empirical analysis. We surveyed 160 service providers of Ticket Monster We also surveyed 160 social commerce users who have experienced in using Ticket Monster service. Out of 320 surveys, 20 questionaries which were unfit or undependable were discarded. Consequently the remaining 300(service provider 150, user 150)were used for this empirical study. The statistics were analyzed using SPSS 12.0. Implications of the empirical analysis result of this study are as follows: First of all, There are order differences in the importance of social commerce CSF between two groups. While service providers regard Price Economic as the most important CSF influencing purchasing intention, the users regard 'Trust' as the most important CSF influencing purchasing intention. This means that the service providers have to utilize the unique strong point of social commerce which make the customers be trusted rathe than just focusing on selling product at a discounted price. It means that service Providers need to enhance effective communication skills by using SNS and play a vital role as a trusted adviser who provides curation services and explains the value of products through information filtering. Also, they need to pay attention to preventing consumer damages from deceptive and false advertising. service providers have to create the detailed reward system in case of a consumer damages caused by above problems. It can make strong ties with customers. Second, both service providers and users tend to consider that social commerce CSF influencing purchasing intention are Price Economic, Utility, Trust, and Word of Mouth Effect. Accordingly, it can be learned that users are expecting the benefit from the aspect of prices and economy when using social commerce, and service providers should be able to suggest the individualized discount benefit through diverse methods using social network service. Looking into it from the aspect of usefulness, service providers are required to get users to be cognizant of time-saving, efficiency, and convenience when they are using social commerce. Therefore, it is necessary to increase the usefulness of social commerce through the introduction of a new management strategy, such as intensification of search engine of the Website, facilitation in payment through shopping basket, and package distribution. Trust, as mentioned before, is the most important variable in consumers' mind, so it should definitely be managed for sustainable management. If the trust in social commerce should fall due to consumers' damage case due to false and puffery advertising forgeries, it could have a negative influence on the image of the social commerce industry in general. Instead of advertising with famous celebrities and using a bombastic amount of money on marketing expenses, the social commerce industry should be able to use the word of mouth effect between users by making use of the social network service, the major marketing method of initial social commerce. The word of mouth effect occurring from consumers' spontaneous self-marketer's duty performance can bring not only reduction effect in advertising cost to a service provider but it can also prepare the basis of discounted price suggestion to consumers; in this context, the word of mouth effect should be managed as the CSF of social commerce. Third, Trade safety was not derived as one of the CSF. Recently, with e-commerce like social commerce and Internet shopping increasing in a variety of methods, the importance of trade safety on the Internet also increases, but in this study result, trade safety wasn't evaluated as CSF of social commerce by both groups. This study judges that it's because both service provider groups and user group are perceiving that there is a reliable PG(Payment Gateway) which acts for e-payment of Internet transaction. Accordingly, it is understood that both two groups feel that social commerce can have a corporate identity by website and differentiation in products and services in sales, but don't feel a big difference by business in case of e-payment system. In other words, trade safety should be perceived as natural, basic universal service. Fourth, it's necessary that service providers should intensify the communication with users by making use of social network service which is the major marketing method of social commerce and should be able to use the word of mouth effect between users. The word of mouth effect occurring from consumers' spontaneous self- marketer's duty performance can bring not only reduction effect in advertising cost to a service provider but it can also prepare the basis of discounted price suggestion to consumers. in this context, it is judged that the word of mouth effect should be managed as CSF of social commerce. In this paper, the characteristics of social commerce are limited as five independent variables, however, if an additional study is proceeded with more various independent variables, more in-depth study results will be derived. In addition, this research targets social commerce service providers and the users, however, in the consideration of the fact that social commerce is a two-sided market, drawing CSF through an analysis of perception gap between social commerce service providers and its advertisement clients would be worth to be dealt with in a follow-up study.