• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.12
• /
• pp.1691-1701
• /
• 1998

Fly ash produced in coal combustion is a fine-grained material consisting mostly of spherical, glassy, and porous particles. A study on the formation mechanism of the fly ash from coal particles in the pulverized coal power plant is investigated with a physical, morphological, and chemical characteristic analysis of fly ash collected from the Samchonpo power plant. This study may contribute to the data base of domestic fly ash, the improvement of combustion efficiency, fouling phenomena and ash collection in the electrostatic precipitator. The physical property of fly ash is determined using a particle counter for the measurement of ash size distribution. Morphological characteristic of fly ash is performed using a scanning electron micrograph. The chemical components of fly ash are determined using an inductively coupled plasma emission spectrometry(ICP). The distribution of fly ash size was bi-modal and ranged from 12 to $19{\mu}m$ in mass median diameter. Exposure conditions of flue gas temperature and duration within the combustion zone of the boiler played an important role on the morphological properties of the fly ash such as shape, particle size and chemical components. The evolution of ash formation during pulverized coal combustion has revealed three major mechanisms by large particle formation due to break-up process, gas to particle conversion and growth by coagulation and agglomeration.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.689-696
• /
• 1989

In this experimental study, relative particle size distribution was measureed at the inlet and outlet of the slit impactor using the particle sizer. The imployed measuring method of the size distribution was different from the conventional method. This measurement system has the advantage of obtaining the particle collection efficiency for various particle size easily and at once compared with other methods. The effects of jet to plate distance and Reynolds number on the characteristic impactor efficiency curves have been studied. In the results of this experiment, the increment of collection efficiency was observed as Reynolds number increases in the case of S/W = 1/2 but was very slight. The influence of S/W is more remarkable than that of Reynolds number on the particle collection efficiency.

• Korean Journal of Radiology
• /
• v.21 no.11
• /
• pp.1248-1255
• /
• 2020

Objective: To analyze long-term follow-up sonographic findings of intrathyroidal thymus in children. Materials and Methods: Among 1259 patients with congenital hypothyroidism under 15 years of age who underwent thyroid ultrasonography (US), 41 patients were diagnosed with an intrathyroidal thymus based on US criteria, i.e., hypoechoic solid lesion with punctate and linear echogenicity. In 26 patients aged one to 14 years old, the last follow-up US was performed after 6 to 132 months and compared with the initial US. The lesion was considered to decrease in size if there was a change of more than 2 mm in any dimension. The margin change was divided into well-defined and indistinct, blurred. When the echogenicity changed to a hyperechoic from a characteristic thymic echogenicity pattern, the pattern was considered a hyperechogenic. The changes in size were compared with the changes in shape, margin, and echogenicity pattern. The changes in size, shape, margin, and echogenicity were analyzed the association with the age of last follow-up. Statistical analysis was conducted using the chi-squared test and logistic regression. Results: Fifteen (57.7%) cases were stable in size, and 11 (42.3%) decreased in size, including one that disappeared. Ten (38.5%) cases changed to indistinct margins from initially well-defined margins including one case of initially indistinct margin. Six (23.1%) changed to hyperechogenic, from initially characteristic thymic echogenicity patterns. When follow-up change was compared, decreases in size were significantly associated with lesion changes to indistinct margins (p = 0.004). The age at last follow-up was significantly associated with change to hyperechogenicity (odd ratio, 2.141; 95% confidence interval, 1.144-4.010, p = 0.017). Conclusion: On follow-up US, an intrathyroidal thymus may be decreased in size, with indistinct margins, or show changes to a hyperechoic mass. Decreases in size may be associated with changing to indistinct margins, and changes to hyperechogenicity may be associated with increasing age.

• Elastomers and Composites
• /
• v.58 no.4
• /
• pp.179-190
• /
• 2023

The effect of the particle size and silica structure on the wear behavior of Silica/Styrene-Butadiene Rubber (SBR) compounds was investigated using a blade-type abrader and the findings were compared with those obtained with an Akron abrader. The compensated characteristic parameter (Ψ_c), which was the contributory factor of the combined effect of the particle size and filler structure, was introduced. This parameter was found to exhibit a linear relationship with the Young's modulus. The Young's modulus correlated more with Ψ_c than the uncompensated characteristic parameter (Ψ) modeled for carbon black. The wear rate and volume loss measured using a blade-type abrader and Akron abrader were respectively observed to be inversely proportional to Ψ_c, that is, the wear resistance of Silica/SBR compound improved as the particle size became smaller and the silica structure became intricate. The coefficient of determination (R²) obtained from the linear relationship between Ψ_c and wear rate was higher than those between Ψ_c and volume loss for the Silica/SBR compound. Thus, the blade-type abrader exhibited high potential to be used for accurately evaluating the effect of particle size and structural properties of silica on the wear behavior of SBR compounds.

• Journal of the Korean Statistical Society
• /
• v.36 no.4
• /
• pp.479-488
• /
• 2007

The elliptic random field is an extension to the Gaussian random field. We proved a theorem which characterizes the elliptic random field. We proposed a heuristic approach to derive an approximation to the distribution of the size of one connected component of its excursion set above a high threshold. We used this approximation to approximate the distribution of the largest cluster size. We used simulation to compare the approximation with the exact distribution.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.679-683
• /
• 2005

In this study, we investigate the characteristic of the poly-Si grain and morphology influenced by XeCl excimer laser system. The stable laser beam source is basic requested; the irradiation beam through optical lens module is more important which limit the grain size smaller than $0.5{\mu}m$. The homogenization lens designs control the poly-Si grain size; so we hardly get enlarge grain size by one laser irradiation scan.

• Geomechanics and Engineering
• /
• v.15 no.3
• /
• pp.811-822
• /
• 2018

Chip size distribution can be used to evaluate the cutting efficiency and to characterize the cutting behavior of rock during cutting and fragmentation process. In this study, a series of linear cutting tests was performed to investigate the effect of cutting conditions (specifically cut spacing and penetration depth) on the production and size distribution of rock chips. Linyi sandstone from China was used in the linear cutting tests. After each run of linear cutting machine test, the rock chips were collected and their size distribution was analyzed using a sieving test and image processing. Image processing can rapidly and cost-effectively provide useful information of size distribution. Rosin-Rammer distribution pamameters, the coarseness index and the coefficients of uniformity and curvature were determined by image processing for different cutting conditions. The size of the rock chips was greatest at the optimum cut spacing, and the size distribution parameters were highly correlated with cutter forces and specific energy.

• Korean Journal of Human Ecology
• /
• v.18 no.6
• /
• pp.1303-1314
• /
• 2009

The purpose of this study lies in examining the characteristics of differentiated body types for plus-size women and obtaining basic data for the wide-ranging choices of ready-made clothing in a consumer's place. The results of this study displayed no significant differences for subjects in their 30s and 40s in comparison to standards by ages but showed a significant difference with subjects in their 50s when compared with the data from Size Korea (2004). Research data in the height and length categories were lower, and the majority of data from the other categories were higher. In order to analyze the characteristics of a plus-size woman's body, 4 factors were differentiated into 3 types with 17 categories: Factor 1 was the element of the thickness of the trunk, factor 2 was the element of the thickness of the lower body and legs, factor 3 was the element of shoulder size and factor 4 was the element of the upper body length. The accumulation rate was shown to be 74.47%. The characteristics for each type were as follows: Type 1 is a body type with a relatively thin waist, small width and girth of upper body and curvy lower body, type 2 is the average body type, and type 3 is a body type with big breasts and abdominal obesity. The standard body type belonged to type 2. According to the correspondency test between age and type, the characteristics of type 1 corresponded relatively close to the measures of subjects in their 40s and relatively far from subjects in their 30s to 50s while type 2 and type 3 appeared to be similar to subjects in their 50s.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1321-1328
• /
• 2009

In this paper, an electromagnetic force driving actuator (EMFA) and three-link mechanism are proposed as a driving mechanism and connection device for low voltage air circuit breaker (ACB). As the result of dynamic characteristic analysis, the actuator and link mechanism are designed from the simulation and manufactured. The magneitc field of the EMFA is analyzed using the finite element method (FEM). The dynamic characteristic analysis with calculation of the circuit equation and kinetical equation is performed by the time difference method (TDM). Also, the result of the analysis is verified through the experiment of the fabrication model. In this paper, the EMFA size is smaller than the actuator for high voltage circuit breaker. Thus, the dynamic characteristic is analyzed with end-winding inductance that is calculated by the same method which is applied on the circle type end-winding of motors. The designed model for 1600 ampere-frame ACB and the three-link mechanism for connecting contact part with actuating part are manufactured. It is confirmed that the three-link mechanism is possible for improving the circuit breaker efficiency and reducing the size of the EMFA. It is proved that the improved 2-D analysis is more accurate than established method.

• Proceedings of the KIEE Conference
• /
• 1999.11a
• /
• pp.1-3
• /
• 1999

EM (ElectroMagnetic) pump is used for the purpose of transporting liquid sodium coolant with electrical conductivity in the LMR(Liquid Metal Reactor). (In the present study, pilot EM pump has been designed by using of equivalent circuit method which is commonly employed to analyze linear induction machines for the test of removal of residual heat. The length and diameter of the pump have fixed values of 840 mm and 101.6 mm each by taking account of geometrical size of circulation loop for the installation of EM pump. Flowrate versus developing pressure is related from Laithwaite's standard design formula and the characteristic analyses of developing force and efficiency are carried out according to change of input frequency. From the characteristic curve, input frequency of 13 Hz is determined as the design frequency. On the other hand, The annular air gap size of 6.05 mm is selected not to bring about too much hydraulic loss. Resultantly design analysis makes pump have the electrical input of 604 VA and the hydrodynamical capacity of 1.3 bars and 40 l/min.