• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.261-271
• /
• 1997

This paper presents the design process and characteristic test results of tension sensors for measuring the ultimate tension forces of surgical wires. Three types of sensor were designed and tested for calibration. The first two types which transfer the wire tension to the sensing element by direct contact have too much hysterisis errors due to the firctional effect. This error can be considerably reduced in the modified structure, where a cover and a loading button is used to transfer force and moment to the sensing element. The strains predicted by theoretical equations agree well with those by finite element calculations neglecting friction and the strains by finite element analysis considering friction are in good agreement with those measured by four strain gages. The modified ring type tension sensor developed in this paper is expected to be useful for measuring the tension of surgical wires with nonlinearity of 1.31%FS, hysterisis of 5.74%FS and repeatability of 0.19%FS.

• Composites Research
• /
• 제24권4호
• /
• pp.29-35
• /
• 2011

전통적인 특성길이 방법을 이용하여 원공이 있는 복합재 적층판의 강도를 예측하기 위해서는 원공이 있는 적층뿐만 아니라 원공이 없는 적층판에 대한 시험 결과와 유한요소해석이 필요하였다. 본 논문에서는 응력집중계수와 재료상수를 이용하여 유한요소해석 없이 복합재 적층판 원공 주위의 응력분포 및 인장특성길이를 추정하고, 이를 바탕으로 원공이 있는 복합재 적층판의 인장강도를 예측할 수 있는 방법을 제안하였다. 또한 새로운 방법에서는 재료의 효과가 변수로 고려되므로 다양한 재료에 대한 적용이 가능하며 원공이 있는 복합재 적층판에 대한 시험도 생략할 수 있다. 적층판 주위의 응력분포는 유한요소해석과의 비교를 통해 검증하였고, 최종적으로는 USN125 탄소/에폭시 적층판을 제작하여 파손하중 예측 결과와 시험 결과를 비교하였다. 원공이 있는 다양한 형상의 복합재 적층판의 파손강도 예측 결과는 최대 8% 이내의 오차로 시험 결과와 잘 일치함을 확인하였다.

• 자원환경지질
• /
• 제28권5호
• /
• pp.503-512
• /
• 1995

2차원 불연속 절리 모델 (Discrete Fracture Model)을 사용하여 절리망 내에서 지하수 흐름을 시뮬레이션하였다. 불연속 절리 모델에서는 지하수가 오직 절리망을 통해서 흐른다고 가정한다. 이와 같은 분석은 결정질암 같이 지질 매체의 투수율이 매우 낮은 경우에 유용하다. 하지만 불연속 절리망을 완벽하게 구현하는 것이 불가능하므로, 이에 접근하는 방법으로 확률 통계적 모델이 제안되었다. 확률-통계적 모텔은 특성인자(밀도, 방향, 길이, 틈새두께 등)가 특별한 분포 유형을 갖는다고 가정한다. 확률-통계적 모델은 가정된 분포를 따르도록 특성인자를 생성한다. 이 후 본 모델을 통해 분석된 몇몇 특성인자를 가지고 절리망을 생성한다. 절리망을 생성한 이 후 지하수의 유통을 계산하기 위해 유한요소법을 적용하였다. 이 때 일차원 선요소가 유한요소망의 주요 요소이다. 시뮬레이션 결과는 절리망 내의 주요 흐름 경로를 통해 보여진다. 절리망 내의 지하수 속도를 비교하여 주요 흐름 경로를 찾아낸다. 본 연구에서 개발된 모델은 절리망 내의 지하수 흐름에 특성인자들이 미치는 영향을 평가할 수 있는 방법을 제공한다. 이를 위하여 30번의 생성을 하는 몬테카를로 시뮬레이션을 통해서 여러 특성 인자들이 지하수 흐름에 미치는 영향을 평가하였다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.41-42
• /
• 2018

• Structural Engineering and Mechanics
• /
• 제16권6호
• /
• pp.655-674
• /
• 2003

Investigated in this study are the natural vibration characteristics of the coaxial cylindrical shells coupled with a fluid. Theoretical method is developed to find the natural frequencies of the shell using the finite Fourier series expansion, and their results are compared with those of finite element method to verify the validation of the method developed. The effect of the fluid-filled annulus and the boundary conditions on the modal characteristics of the coaxial shells is investigated using a finite element modeling.

• Computers and Concrete
• /
• 제9권1호
• /
• pp.35-50
• /
• 2012

The 2D representative volume element (RVE) for softening quasi-brittle materials like concrete is determined. Two alternative methods are presented to determine a size of RVE in concrete subjected to uniaxial tension by taking into account strain localization. Concrete is described as a heterogeneous three-phase material composed of aggregate, cement matrix and bond. The plane strain FE calculations of strain localization at meso-scale are carried out with an isotropic damage model with non-local softening.

• Structural Engineering and Mechanics
• /
• 제14권1호
• /
• pp.1-20
• /
• 2002

Investigated in this study are the modal characteristics of the eccentric cylindrical shells with fluid-filled annulus. Theoretical method is developed to find the natural frequencies of the shell using the finite Fourier expansion, and their results are compared with those of finite element method to verify the validation of the method developed. The effect of eccentricity on the modal characteristics of the shells is investigated using a finite element modeling.

• 터널과지하공간
• /
• 제7권1호
• /
• pp.20-30
• /
• 1997

A discrete joint finite element with joint surface degradation was developed to investigate the shear behavior of rough rock joint. Isoparametric formulation was used for facilitating the implementation of the element in existing Finite Element Codes. The elasto-plastic joint deformation model with the discontinuity constitutive law proposed by Plesha was applied to the element. The reliability of the developed finite element code was successfully testified through numerical direct shear tests conducted under both constant normal stress and constant normal displacement conditions. The result of the numerical direct shear test showed that the code can capture characteristic deformation features envisaged in the direct shear test of rough rock joint.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.59-66
• /
• 2001

The post-peak analysis of concrete structures is carried out using a nine-node Reissner-Mindlin(RM) shell element which is formulated by using degenerated solid concepts. In order to avoid element deficiencies inherited in the standard RM shell element, assumed strains are adopted in the present shell element. A microscopic material model is adopted to represent the inelastic characteristic of concrete material. In particular, a concrete softening model is introduced to this material model. The arc-length control method is used to trace the post-peak behaviour of concrete structures. From the numerical test of the single-edge-notched beam, the present shell element shows a reasonable agreement with experimental data.

• 한국전산구조공학회논문집
• /
• 제23권6호
• /
• pp.593-606
• /
• 2010

This paper presents a formulation to include the prestressing effects in available numerical models for the nonlinear material, instantaneous and long-term analysis of prestressed concrete shell structures, based on the displacement formulation of the finite element method. A four-node flat shell element is adopted for nonlinear analysis of prestressed concrete shells. This element was incorporated into an existing general-purpose finite element analysis program. A distinctive characteristic of the element is its capability to simulate the behavior of shells subjected to a variety of types of loading and drilling rotational stiffness. Consequently, the response of prestressed concrete shell structures can be predicted accurately using the proposed nonlinear finite element procedure.