• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.35-41
• /
• 2014

Real-life time series characteristic data has significant amount of non-stationary components, especially periodic components in nature. Extracting such components has required many ad-hoc techniques with external parameters set by users in a case-by-case manner. In this study, we used Empirical Mode Decomposition Method from Hilbert-Huang Transform to extract them in a systematic manner with least number of ad-hoc parameters set by users. After the periodic components are removed, the remaining time-series data can be analyzed with traditional methods such as ARIMA model. Then we suggest a different way of setting control chart limits for characteristic data with periodic components in addition to ARIMA components.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.75-77
• /
• 1994

This paper presents a method of obtaining transmission network equivalents from the network's driving-point admittance characteristic. Proposed method is based on modal decomposition representation for the large-scale interconnected system. As a result, Norton-type of discrete-time filter model can be generated. It can reproduce the driving-point admittance characteristic of the network. Furthermore proposed model can be implemented into the EMTP in a direct manner. The simulation results with the full system representation and the developed equivalent system showed a good agreement.

• 방사성폐기물학회지
• /
• 제5권3호
• /
• pp.221-227
• /
• 2007

음이온교환수지인 IRN-78및 IRN-77과의 혼합 수지를 액체 상태로 직접 분해 처리하기 위하여 Fenton 시약을 이용하였다. 개선된 분해방법의 특징은 수지를 먼저 건조시키고 $FeSO_4$ 용액을 수지에 완전히 흡수시킨 후 일정량의 $H_2O_2$를 첨가하여 분해반응을 유도하는 방법을 적용하였다. 촉매로서 $CuSO_4,\;Cu(NO_3)_2$ 및 IRN-77 수지의 분해시 사용한 $FeSO_4$를 각각 사용하여 각 이온교환수지의 단독 및 혼합수지의 분해에 필요한 적절한 촉매와 그의 농도 및 $H_2O_2$의 소요량을 측정하였다. IRN-78 수지에 대해 $CuSO_4$ 촉매를 사용한 경우, 초기 분해반응을 유도하기 위해 $40^{\circ}C$까지 가열이 필요하였으며, 반응유도시간은 촉매의 적정온도에서 약 20분 이내 개시되는 것으로 나타났다. 동 수지에 $FeSO_4$를 사용한 경우에는 가열 없이 즉시 분해반응이 진행되었으며 분해율도 수% 높게 나타났다. 결론적으로 IRN-78 및 IRN-77과의 혼합수지의 분해를 위한 최적 촉매는 $FeSO_4$로 나타났으며 가열하지 않고 상온에서 반응유도시간 없이 각 수지를 단독으로 분해한 경우보다 적은 양의 $H_2O_2$로 완전히 액상으로 분해시킬 수 있는 좋은 결과를 얻었다. 또한 이들 각각의 수지 및 혼합수지에 대한 적절한 촉매 및 적정 농도와 완전분해에 필요한 $H_2O_2$의 양을 제시하였다.

• 한국패류학회지
• /
• 제29권4호
• /
• pp.291-301
• /
• 2013

This study researched and compared the sedimentation environment and photosynthetic pigments at Gomso (GS) -bay, Yoja (YJ) -bay and KangJin (KJ) -bay in May, 2012. It was shown that KJ-bay consist of C (clay) and M (mud), and GS-bay consists of Zs (silty sand) and Sz (sandy silt). Averagely, IL of YJ-bay was 4.98%, KJ-bay 6.10%, and GS-bay 1.45%. As for COD concentration, there were no places that exceeded Japanese sediment contamination standard 20 mg/g-dry. As for AVS concentration, in case of KJ-bay, two places exceeded Japanese sediment contamination standard 0.2 mg/g-dry. If we look into the average C/N ratio of bays, YJ-bay showed 8.50, KJ-bay 6.60, and GS-bay 5.52, thus all of them showed the characteristic of oceanic origin. As for the plankton make-up classified by photosynthetic pigments, diatom was dominant, and both ratios of pigment and C/chlorophyll. a showed the relatively lower distribution at GS-bay than at KJ-bay and YJ-bay. It is judged that this is related to the characteristic of flow-in, and it implies that predation process and decomposition by organic matters actively occurs at YJ-bay and KJ-bay.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.687-690
• /
• 1999

Many high-resolution algorithms based on the eigen-decomposition analysis of observed covariance matrix, such as MVE, MUSIC, and EVM, have been proposed. However, the resolution of spectral estimates for these algorithms is severely degraded when Signal-to-Noise Ratio (SNR) is low and arrival angles of signal are close to each other. And EVM and MUSIC is powerful for the characteristic of SNR. But have the limitation that the number of signals presented is known. While MVE is bad the characteristic of SNR. In this study, we propose a modified MVE to enhance the resolution for Direction-Of-Arrival (DOA) estimation of underwater acoustic signal. This is to remove the limitation that existing algorithms should know the information for the number of signals. Because the algorithms founded on the eigen value estimate DOA with only the noise subspace, they have the high-resolution characteristic. And then, with the method reducing the effect of the signal subspace, we are to reduce the degradation because of complementary relationship between the signal subspace and the noise subspace. This paper, with using the simulation data, we have estimated the proposed algorithms, compared it with other high-resolution algorithms. The simulation results show that the modified MVE proposed is accurate and has a better resolution even though SNR is low, under the same condition.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1786-1795
• /
• 2015

It is common practice to identify the insulation faults of GIS through monitor the contents of SF₆ decomposed components. Partial discharges (PD) could lead to the decomposition of SF₆ dielectric, so new reactions usually occur in the mixture of the newly decomposed components including traces of H₂O and O₂. The new reactions also cause the decomposed components to differ due to the different amounts of H₂O and O₂ even under the same strength of PD. Thus, the accuracy of assessing the insulation faults is definitely influenced when using the concentration and corresponding change of decomposed components. In the present research, a needle-plate electrode was employed to simulate the PD event of a metal protrusion insulation fault for two main characteristic components SO₂F₂ and SOF₂, and to carry out influence analysis of trace H₂O and O₂ on the characteristic components. The research shows that trace H₂O has the capability of catching an F atom, which inhibits low-sulfide SF_x from recombining into high-sulfide SF₆. Thus, the amount of SOF₂ strongly correlates to the amount of trace H₂O, whereas the amount of SO₂F₂ is weakly related to trace H₂O. Furthermore, the dilution effect of trace O₂ on SOF₂ obviously exceeds that of SO₂F₂.

• Journal of Welding and Joining
• /
• 제13권3호
• /
• pp.106-115
• /
• 1995

To know the bonding phenomena of Ti/Cu brazed joint, a characteristic of microstructures in bonding interlayer of vacuum brazed pure Ti to Cu has been studied in the temperature range from 1088 to 1133K for various bonding times using Ag-28wt%Cu filler metal. Also intermediate phases formed in bonded interlayer and behavior of layer growth have been investigated. The obtained results in this study are as follows: 1) Liquid insert metal width at the each brazing temperature was proportional to the square root of brazing time, and it was considered that the liquid insert metal width was controlled by the diffusion rate process of primary .alpha.-Cu formed at the Ti side. 2) Intermediate phases formed near the Ti interface were .betha.-Ti and intermetallic compounds TiCu, Ti$_{2}$Cu, Ti$_{3}$Cu, and TiCu. 3) .betha.-Ti formed in Ti base metal durig brazing transformed to lamellar structure, .alpha.-Ti + Ti$_{2}$Cu. The structure came from the eutectoil decomposition reaction in cooling. And the width of .betha.-Ti layer was proportional to the square root of brazing time, and it was considered that the growth of .betha.-Ti layer was controlled by interdiffusion rate process in .betha.-Ti. 4) The layer growth of TiCu, Ti$_{3}$Cu$_{4}$ and TiCu, phases formed near the Ti interface was linerface was linearly proportional to the brazing time, and it was considered that the layer growth of these phases was controlled by the chemical reaction rate at the interface.

• Elastomers and Composites
• /
• 제42권1호
• /
• pp.55-58
• /
• 2007

TG/DTG 열분석법을 이용하여 EPDM/IIR 고무 블렌드의 열적 성질을 각각의 EPDM 및 IIR 샘플과 비교하여 시험하고 그 들 상호간의 상용성을 연구하였다. 실험에서 EPDM/IIR 고무 블렌드 샘플의 TGA 열분석곡선은 EPDM 및 IIR의 고유한 열분해 특성을 동시에 반영하는 모습을 나타내었다. 각각의 샘플에 대한 DTG 곡선을 구하여 본 결과, 블렌드의 DTG 곡선은 EPDM과 IIR 의 DTG peak 특성을 각각 나타내는 두 개의 peak로 분리되어 나타났으며, 특히 IIR의 특성 peak는 원래 IIR peak보다 약 $25\;^{\circ}C$ 정도 고온으로 이동하여 나타난 반면 EPDM의 특성 peak는 약 $15\;^{\circ}C$ 정도 저온으로 이동하여 나타났다. 이러한 결과로부터 EPDM이 IIR에 비해 상대적으로 열적 안정성이 더 큰 것으로 생각되었으며, 또한 EPDM과 IIR의 블렌드는 부분적으로 상용성이 있는 것으로 판단되었다. 또한 미리 결정된 EPDM/IIR 블렌드의 조성비에 따른 DTG 곡선과의 관계를 미리 준비해 두게 되면, 본 실험에서와 같이 비교적 간단한 TGA 실험을 통하여 미지의 EPDM/IIR 블렌드에 대한 조성비도 다른 고무 블렌드에서와 마찬가지로 정량적인 정보를 얻어 낼 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.645-648
• /
• 2011

단일 추진제로써 널리 사용되는 하이드라진은 높은 성능을 가지나 그 맹독성으로 인해 하이드라진을 대체할 새로운 친환경 추진제가 연구되고 있다. 친환경 추진제의 후보군들 중 이온성 액체 추진제는 하이드라진에 비해 낮은 독성과 더불어 높은 비추력, 밀도를 가진다. 이온성 액체 추진제중 하나인 Hydroxylamine Nitrate (HAN)을 사용한 추력기를 설계하기 위해서는 주어진 추진제 유량을 충분히 분해시킬 수 있는 촉매 베드 크기를 구할 필요가 있다. 본 연구에서는 HAN 추진제를 사용한 소형 추력기를 설계하고 추력기의 추진제 분해성능을 특성속도 효율 등으로 평가함으로써 HAN 추력기 설계에 있어 기준점을 제시하고자 한다.

• Ocean Systems Engineering
• /
• 제6권3호
• /
• pp.217-231
• /
• 2016

This paper presents a new approach for underwater image analysis using the bi-dimensional empirical mode decomposition (BEMD) technique and the phase congruency information. The BEMD algorithm, fully unsupervised, it is mainly applied to texture extraction and image filtering, which are widely recognized as a difficult and challenging machine vision problem. The phase information is the very stability feature of image. Recent developments in analysis methods on the phase congruency information have received large attention by the image researchers. In this paper, the proposed method is called the EP model that inherits the advantages of the first two algorithms, so this model is suitable for processing underwater image. Moreover, the receiver operating characteristic (ROC) curve is presented in this paper to solve the problem that the threshold is greatly affected by personal experience when underwater image edge detection is performed using the EP model. The EP images are computed using combinations of the Canny detector parameters, and the binaryzation image results are generated accordingly. The ideal EP edge feature extractive maps are estimated using correspondence threshold which is optimized by ROC analysis. The experimental results show that the proposed algorithm is able to avoid the operation error caused by manual setting of the detection threshold, and to adaptively set the image feature detection threshold. The proposed method has been proved to be accuracy and effectiveness by the underwater image processing examples.