• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.4
• /
• pp.1-14
• /
• 2012

A river is defined as the watercourse flowing through its channel, and the mapping tasks of a river plays an important role for the research on the topographic changes in the riparian zones and the research on the monitoring of flooding in its floodplain. However, the utilization of the ground surveying technologies is not efficient for the mapping tasks of a river due to the irregular surfaces of the riparian zones and the dynamic changes of water level of a river. Recently, the spatial information data sets are widely used for the coastal mapping tasks due to the acquisition of the topographic information without human accessibility. In this research, we tried to extract a river from the RapidEye imagery by using the ISODATA(Iterative Self_Organizing Data Analysis) classification algorithm with the two different parameters(NIR (Near Infra-Red) band and NDVI(Normalized Difference Vegetation Index)). First, the two different images(the NIR band image and the NDVI image) were generated from the RapidEye imagery. Second, the ISODATA algorithm were applied to each image and each river was generated in each image through the post-processing steps. River boundaries were also extracted from each classified image using the Sobel edge detection algorithm. Ground truths determined by the experienced expert are used for the assessment of the accuracy of an each generated river. Statistical results show that the extracted river using the NIR band has higher accuracies than the extracted river using the NDVI.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.643-648
• /
• 2010

Portable fuel cells are commonly operated in the dead-end mode because of such as high fuel utilization. However, the performance of such systems deteriorates continuously with an increase in the amount of by-products such as water vapor and nitrogen. In this study, to verify the effect of water vapor on Proton Exchange Membrane Fuel Cells (PEMFCs), constant-load experiments were carried out for a current density of 600 mA/cm2 and a voltage of 0.4 V, respectively. The performance of the cell was more stable under constant voltage conditions than under constant current density conditions. Condensed water accumulated in the anode channel near the cell outlet. The experimental results show how the relative humidity (RH = 0.15, 0.4 and 0.75) of air at the cathode side affect the performance of PEMFCs with dead-end anode. At RH values higher than 0.15, the mean power density increased by up to 51% and the mean purge duration decreased by up to 25% compared to the corresponding initial values.

• Journal of Wetlands Research
• /
• v.21 no.spc
• /
• pp.1-8
• /
• 2019

River works for water utilization have substantially altered the natural flow regime, and it has resulted in deformation of healthy river ecosystems. In Korea, river restoration projects have conducted actively since 1990's. Major purposes of the river restoration are the rehabilitation of modified river channel, improvement of water quality, and creation of aquatic habitats as well as recreational spaces using natural material for river work. However, there have been little interests about the restoration of flow regime which influences to most aspects of river ecosystems. The restoration of natural flow regime has received much attention in preservation of aquatic ecosystems. It should be needed to explore the relationship between flow regime and river ecosystems, and the restoring flow regime is essential. This paper introduce the concept of environmental flow through the interrelation between flow regime and river ecosystem. It provides rolls of flow regime and addresses the method of establishing target flow regime using the RVA(Range of Variability Approach) that suggested by Richter et al.(1997) through analysis of altered flow pattern case of Han river basin.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.493-502
• /
• 2007

In this paper, we propose a handoff-aware DiffServ scheduler which intends to guarantee various QoS requirements of multimedia services for mobile nodes in TDD/CDMA based wireless networks. TDD is widely used duplexing mechanism in wireless communications. Unlike FDD, TDD allows a node to symmetrically communicate with a base station by using a single frequency band, resulting in high utilization of wireless resources. DiffServ is regarded as a relatively simple QoS support mechanism and thus it is easy to be extended. This is because DiffServ is not a per-flow based mechanisms and it does not require any signaling protocol. However, previously proposed DiffServ schedulers for wired networks can not be deployed directly into wireless networks since they do not consider properties of wireless networks. As a solution to the problem, DSS(DiffServ Supporting Scheduler) was proposed. DSS uses uplink channel, which is originally used for a node to require a base station to transmit packets, to support QoS efficiently. However, QoS does not consider handoff so that it can not support QoS for moving nodes from one cell to the other cell. Therefor. the proposed handoff support QoS mechanism is necessary for TCC/CDMA networks. The proposed scheme allows a mobile node to achieve seamless service without QoS degradation even for the handoff duration.

• The KIPS Transactions:PartC
• /
• v.14C no.4
• /
• pp.349-358
• /
• 2007

Ethernet Passive Optical Network(EPON), which is one of PON technologies for realizing FTTx(Fiber-To-The-Curb/Home/Office), can cost-effectively construct optical access networks. In addition, EPON can provide high transmission rate up to 10Gbps and it is compatible with existing customer devices equipped with Ethernet card. To effectively control frame transmission from ONUs to OLT EPON can use Multi-Point Control Protocol(MPCP) with additional control functions in addition to Media Access Control(MAC) protocol function. For EPON, many researches on intra- and inter-ONU scheduling algorithms have been performed. Among the inter-ONU scheduling algorithms, IPS(Interleaved Polling with Stop) based on polling scheme is efficient because OLT assigns available time portion to each ONU given the request information from all ONUs. Since the IPS needs an idle time period on uplink between two consecutive frame transmission periods, it wastes time without frame transmissions. In this paper, we propose a dynamic bandwidth allocation algorithm to increase the channel utilization on uplink and evaluate its performance using simulations. The simulation results show that the proposed Two-phase Cycle Danamic Bandwidth Allocation(TCDBA) algorithm improves the throughput about 15%, compared with the IPS and Fast Gate Dynamic Bandwidth Allocation(FGDBA). Also, the average transmission time of the proposed algorithm is lower than those of other schemes.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.2
• /
• pp.191-195
• /
• 2008

This paper proposes a technique for improving IEEE 802.11e EDCA's performance by dynamically adjusting each class's contention window size based on each class's traffic amount. For providing differentiated service differently from 802.11, 802.11e EDCA maintains four classes each of which specifies different static minimum and maximum contention window sizes. Since the initial window sites significantly affect the 802.11e performance, several window adjustment schemes have been proposed. One of the schemes known as CWminAS (CWmin Adaptation Scheme) dynamically and synchronously determines the four windows' site based on the periodically measured collision rate. This method, however, can lower the send probability of high priority classes since it can't differentiate their collisions from those of low priority classes, leading to the channel underutilization. For solving this problem, we propose ACATICT(Adaptive Contention-window Adjustment Technique based on Individual Class Traffic) algorithm which adapts each class window size based on each individual collision rate rather than one average collision rate. Our simulation experiments show that ACATICT achieves better utilization by around 10% at maximum.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.48-57
• /
• 2013

Smartphones provide users with environment for communication and sharing information and at the same time play an important role of mobile technology and mobile art development. Smartphone technology-related researches are being accelerated especially with the advent of mobile Augmented Reality(AR) age, but the studies on user participation that is essential for AR content industry were insufficient. In that regard, the assistance from mobile art area that has already developed these characteristics is essential. Thus, this article is to classify mobile art that has not been studied a lot domestically into feature phone usage and smartphone usage and to analyze each example case with the three most used methods. The usage of feature phones which use the sound and images of mobile devices can be divided into three: installation and performing methods, single channel video art method and five senses communication method. On the other hand, the usage of smartphones that use sensors, cameras, GPS and AR can be divided into location-based AR, marker-based AR and markerless AR. Also, as a result of examining mobile AR content utilization technology by industries, combined methods are utilized; tourism and game-related industries use location-based AR, education and medicine-related industries use marker-based AR, and shopping-related industries use markerless AR. The development of AR content industry is expected to be accelerated with mobile art that makes use of combined technology method and constant communication method through active participation of users. The future development direction of mobile AR industry is predicted to have minimized HMD, integration of hologram technology and artificial intelligence and make the most of big data and social network so that we could overcome the technological limitation of AR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7B
• /
• pp.585-597
• /
• 2004

In this paper, we propose the functional models of optical burst switching (OBS) routers to apply GMPLS (Generalized Multiprotocol Label Switching) to optical networks based on OBS. In addition, we introduce a connection admission control (CAC) algorithms which are operated in this models and can accommodate the required QoS. Firstly, the characteristics of current GMPLS and OBS for the optical Internet are basically considered. With this consideration, the models are proposed to accept OBS features which include the recognition of data boundary with control information and the statistical multiplexing in terms of bursts. Secondly, we use an offset time decision (OTD) algorithm on behalf of controlling the connection admission with taking QoS parameters such as burst loss rate(BLR) and service-differentiation ratio(SDR) into consideration. The proposed CAC algorithms use the offered load of LSP (Label Switched Path), wavelength information, and QoS parameters as inputs of OTD algorithm. A call setup request will be accepted when the offset time decided by OTD algorithm is reasonable for guaranteeing its requested QoS. Simulation is used for performance evaluation. Results show the proposed schemes can guarantee the required QoS and those are better than the previous one in terms of channel utilization.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.435-445
• /
• 2007

Snoop protocol is one of the efficient schemes to compensate TCP packet loss and enhance TCP throughput in wired-cum-wireless networks. However, Snoop protocol has a problem: it cannot perform local retransmission efficiently under the bursty-error prone wireless link. To solve this problem, SACK-Aware-Snoop and SNACK mechanism have been proposed. These approaches improve the performance by using SACK option field between base station and mobile host. However in the wireless channel with high packet loss rate, SACK-Aware-Snoop and SNACK mechanism do not work well because of two reason: (a) end-to-end performance is degraded because duplicate ACKs themself can be lost in the presence of bursty error, (b) energy of mobile device and bandwidth utilization in the wireless link are wasted unnecessarily because of SACK option field in the wireless link. In this paper, we propose a new local retransmission scheme based on Cross-layer approach, called Cross-layer Snoop(C-Snoop) protocol, to solve the limitation of previous localized link layer schemes. C-Snoop protocol includes caching lost TCP data and performing local retransmission based on a few policies dealing with MAC-layer's timeout and local retransmission timeout. From the simulation result, we could see more improved TCP throughput and energy efficiency than previous mechanisms.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.299-313
• /
• 2002

Recently, the demand for mobile communications and multimedia services has rapidly increased so that conventional cellular system cannot fulfill the requirement of users (capacity and QoS) any more. Therefore, the hierarchical cellular system has been suggested in order to guarantee the QoS and to admit large population of users. IMT-2000 adopts the hierarchical cellular structure, which requires a call control algorithm capable of manipulating and utilizing the complicated structure of hierarchical cellular structure with handiness and efficiency. In this thesis, as an improvement of conventional combined algorithm, a new call control algorithm considering the moving speed of terminal and bandwidth is suggested. This algorithm employs buffers and guard channels to reduce the failure rate. Also, this algorithm considers the moving speed of terminal and bandwidth to elevate the efficiency. Furthermore, calls are handled separately according to the moving speeds of terminal and bandwidths to improve the QoS and reduce the handover rate. As an evaluation of the suggested algorithm, a model hierarchical cellular system is constructed and simulations are conducted with various types of traffic. As the result of the simulations, such indices as block rate, drop rate, channel utilization, and the number of inter layer handovers are examined to demonstrate the excellency fo the suggested algorithm.