• Structural Engineering and Mechanics
• /
• 제76권6호
• /
• pp.737-749
• /
• 2020

A hybrid bridge deck is proposed, which includes steel bars, concrete and glass-fiber-reinforced-polymer (GFRP) plates with channel sections. The steel bar in the negative moment region can increase the flexural stiffness, improve the ductility, and reduce the GFRP ratio. Three continuous decks with different steel bar ratios and a simply supported deck were fabricated and tested to study the mechanical performance. The failure mode, deflection, strain distribution, cracks and support reaction were tested and discussed. The steel bar improves the mechanical performance of continuous decks, and a theoretical method is proposed to predict the deformation and the shear capacity. The experimental results show that all specimens failed with shear failure in the positive moment region. The increase of steel bar ratio in the negative moment region can achieve an enhancement in the flexural stiffness and reduce the deflection without increasing GFRP. Moreover, the continuous deck can achieve a yield load, and the negative moment can be carried by GFRP plates after the steel bar yields. Finally, a nonlinear analytical method for the deflection calculation was proposed and verified, with considering the moment redistribution, non-cracked sections and nonlinearity of material. In addition, a simplified calculation method was proposed to predict the shear capacity of GFRP-concrete decks.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.61-67
• /
• 2016

OBJECTIVES : The objective of this study is to detect road cavities using multi-channel 3D ground penetrating radar (GPR) tests owned by the Seoul Metropolitan Government. METHODS : Ground-penetrating radar tests were conducted on 204 road-cavity test sections, and the GPR signal patterns were analyzed to classify signal shape, amplitude, and phase change. RESULTS : The shapes of the GPR signals of road-cavity sections were circular or ellipsoidal in the plane image of the 3D GPR results. However, in the longitudinal or transverse direction, the signals showed mostly unsymmetrical (or symmetrical in some cases) parabolic shapes. The amplitude of the GPR signals reflected from road cavities was stronger than that from other media. No particular pattern of the amplitude was found because of nonuniform medium and utilities nearby. In many cases where road cavities extended to the bottom of the asphalt concrete layer, the signal phase was reversed. However, no reversed signal was found in subbase, subgrade, or deeper locations. CONCLUSIONS : For detecting road cavities, the results of the GPR signal-pattern analysis can be applied. In general, GPR signals on road cavity-sections had unsymmetrical hyperbolic shape, relatively stronger amplitude, and reversed phase. Owing to the uncertainties of underground materials, utilities, and road cavities, GPR signal interpretation was difficult. To perform quantitative analysis for road cavity detection, additional GPR tests and signal pattern analysis need to be conducted.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2868-2875
• /
• 2015

개수로의 흐름 특성을 결정짓는 중요한 요소 중 하나는 흐름의 저항을 나타내는 마찰속도와 마찰계수이다. 하지만 개수로 흐름에서는 그 중요성에도 불구하고 자유수면과 단면의 복잡함, 다양한 수리변수들에 의해서 완벽한 해석이 매우 어렵다. 마찰계수에 대한 연구는 경험적 실험결과에 의존하고 있으므로 손쉬운 적용이 쉽지 않다. 따라서 본 연구에서는 엔트로피 개념을 활용하여 새로운 마찰계수 산정 공식을 제안하고 공식의 정확성을 증명하기 위해서 사다리꼴과 사각단면을 가진 개수로 실험 자료를 사용하였다. 본 공식의 장점은 무엇보다도 개수로에서 정확한 값을 알기 어려운 에너지 경사 항을 사용하지 않는 것에 있다. 그리고 이론적 배경을 바탕으로 높은 정확성을 가진 마찰계수 f의 산정이 가능함을 보여주었다.

• 물과 미래
• /
• 제15권1호
• /
• pp.33-42
• /
• 1982

하천부지의 이용, 개간사업 및 하천을 공학적 측면에서 지속관리해야 된다는 이론이 활발해 짐에 따라 하천형태학의 연구가 주목을 받게 되었다. 그 가운데서도 하천의 사행에 관한 문제는 가장 중요함을 인정받았다. 그러므로 사행특성의 분석에서 많은 이상적인 모델을 사용하였는데 이와 같은 이상적이 모델에 의해 얻어진 자료나 기하학적 변수의 결정방법은 개인의 선호에 의해 달라지는 수가 많다. 본 연구에서는 수로형태의 모델화에 의한 부합리를 제거하기 위하여 통계적인 방법을 사용하였으며 새로운 사행특성 분석방법인 선형 일반화 알고리즘에 의한 수로모델을 사행특성 분석에 사용하였다. 그 결과 곡율의 분산정도가 사행밀도를 판별해주는 지수가 됨을 알았고, 첨연도는 임의수로 내에서 직선수로의 특성을 표시하는 척도가 됨을 알 수 있었다. 특히 선형 일반화 알고리즘에 의한 수로모델은 사행특성을 분석하는데 좋은 모델이 됨을 나타내 주었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.136-141
• /
• 2000

A study of counter-current two-phase flow in narrow rectangular channels has been performed. Two-phase flow regimes were experimentally studied in 760 mm long and 100 mm wide test sections with 2.0 and 3.0mm gaps. The resulting data have been compared to previous transition models. For the transition from bubbly to slug flow the superficial velocity of gas increased as the gap width increased. The comparison of experimental data to the transition model developed by Taitel and Barnea showed relatively good agreement for the bubbly-to-slug transition in the case of 2mm gap width. For the criteria of Mishima and Ishii to be applicable to the slug-to-churn transition the distribution parameter should be well defined for narrow channels. Even though the gap width of narrow channels increased the superficial gas velocity did not change for the transition form chum to annular flow regime. For the chum-to-annular transition the model of Taitel and Barnea showed discrepancies with experimental data, especially in the channel with larger gap.

• 물과 미래
• /
• 제18권1호
• /
• pp.57-65
• /
• 1985

하천부지의 사용과 개간사업 및 하천을 공학적인 측면에서 유지관리해야 된다는 것이 활발해짐에 따라 하천형태학의 연구가 주목을 받게 되었다. 그 가운데서도 하천의 사행에 관한 문제는 가장 중요하다 할 것이다. 사행특성의 분석에는 여러 가지의 이상적인 모델을 사용하여 왔으나 이와같은 이상적인 모델에서 얻어진 자료나 기하학적 변수의 결정방법은 개인의 선호에 따라 많은 다름을 보아왔다. 본 연구에서는 최근의 새로운 방법인 선형일반화 알고리즘에 의한 수로모델을 사행특성분석에 사용하였으며, 또한 수로형태의 모델화에서의 불합리함을 최대한 제거하기 위하여 통계적인 방법을 사용하였다. 그 결과 곡율의 분산정도는 사행밀도를 판별할 수 있는 지수가 될 수 있고 첨예도는 어떤 수로내에 직선 수로의특성을 표시하는 척도가 됨을 알 수 있었다.

• 대한안전경영과학회지
• /
• 제15권2호
• /
• pp.129-134
• /
• 2013

In this study, the heat flow analysis compatible commercial code CFX 11 was used to develop the structure inside PCB circuit board devices, which could stable radiant heat as well as the cooling device within it. In case of modifying the arrangement of electronic parts on the PCB inside the multi channel temperature measurement board devices, radiant heat effects did not show a rising tendency, whereas the overall temperature went down in case of installing the vents in the outer case of PCB circuit board devices. In terms of installation location, it was the most appropriate to install it on the electronic parts with no heat. Besides, in case of mounting the fan as a cooling device by considering various user environments for multi channel temperature measurement board devices, the radiant heat effects were shown higher than in case of installing the vents, and the middle sections were the most appropriate to its installation location. In case of changing the wind quantity of the fan from its selected installation location, the best radiant heat effects were shown at high speed as expected.

• 한국통신학회논문지
• /
• 제30권1A호
• /
• pp.1-9
• /
• 2005

표준 단일모드 광섬유를 전송선으로 사용하고, Raman 증폭기 없이 EDFA 증폭기만을 사용하여, 각 채널당 10 Gb/s의 파장다중화된 40개 채널신호들을 장거리 전송하는 경제적인 광 링크를 구성한 뒤, 이 링크의 전송 성능 최적화를 위해 분산 맵 구조의 차이에 따른 성능 차이를 분석하였다. 이 링크의 분산 맵은 전치분산보상, 구간분산보상 그리고 후치분산보상으로 나누어지는데 이들의 다양한 조합을 통해 15 가지의 다양한 분산 맵들을 구성한 뒤 각각의 경우를 분석하여 링크 성능을 크게 향상시키는 최적화된 분산맵 구조를 구하였다. 또한, 이 최적화된 분산 조건이, 단일모드 광섬유와 분산보상 광섬유가 가지는 파장에 따른 분산 기울기의 불일치로 인해 받게 되는 영향을 조사하였고, 이 영향이 링크의 성능에 미치는 효과가 무시될 수 있는 분산 기울기의 허용 가능한 불일치 범위를 구했다.

• Journal of Ginseng Research
• /
• 제36권4호
• /
• pp.469-476
• /
• 2012

Raw ginseng root of Panax ginseng is graded according to its shape and the quality of its internal tissue. A variety of grades are sold with prices according to grade. If an inferior raw ginseng is purchased, the consumer experience an economic loss. This research was conducted in order to explore the possibility of developing a noninvasive method for investigating raw ginseng's internal tissue. It has been determined that computed tomography (CT) scanner images agreed with actual cross-sections of raw ginseng. CT images were obtained to assess the internal portions of raw ginseng, and CT scans of raw ginseng were thoroughly measured using the Hounsfield unit (HU) system, since it allows for a more detailed analysis compared to nuclear magnetic resonance imaging. HU is a measure of attenuation used for CT images, with each pixel being assigned a value using a scale on which air is defined as -1000, water as 0 and compact bone as +1000. It takes about one second to process are slice and produce an image of the raw ginseng by a one channel CT scanner. An image good enough to discriminate the internal tissues can be obtained in 1/24 seconds with a one-channel CT scanner. Using this method, images of raw ginseng can be obtained and the characteristics of the internal tissues can be observed in a short time.

• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.17-24
• /
• 2015

In this paper, we investigated the output polarization of a Lyot-type optical fiber comb filter based on a polarization-diversity loop structure. It was found that the output state of polarization (SOP) of the filter made a wavelength-dependent evolution, and the spectral periods of the output SOP variation in flat-top and lossy flat-top band modes were the channel separation of the filter and its half, respectively. For a certain input SOP, the filter could pass or reject specific spectral sections by adding and controlling an output analyzer. In particular, it was theoretically anticipated that the filter with the output polarizer could provide the fine continuous tuning of its pass band center in a wavelength range corresponding to the ${\pm}9.5%$ of channel spacing(0.8nm) when the input SOP was properly adjusted. It is expected that this tuning function can be effectively applied to suppress unwanted spectral portions in modulated optical signals.