• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.562-570
• /
• 1997

In Direct Sequence Code Division Multiple Access(DS/CDMA) communication systems, it is important to contraol the power of reverse link channel evenly for overall channel capacity. To control the reverse link powers efficiently, it is necessary to estimate signal quality of each reverse link channel. In this paper, we discuss a method to estimate the signal-to-noise ratio(SNR) for each channel by measuring the powers of pilot and noises. Computer simulations are done to show the effectiveness of the scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.759-764
• /
• 2004

This paper proposes a method that estimates MIMO channel characteristics analytically using a 3D ray tracing propagation model. We calculate the discrete spatial correlation between sub-channels by considering phase differences of paths, and using this, estimate the mean capacity upper bound of MIMO channel by Jensen's inequality. This analysis model is a deterministic model that do not approach stochastically through measurement nor approach statistically through Monte-Carlo simulations, so this model has high efficiency for time and cost. And based on the electromagnetic theory, this model may analyze quantitatively the parameters which can affect the channel capacity - antenna pattern, polarization mutual coupling, antenna structure and etc. This model may be used for the development of an optimal antenna structure for MIMO systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.1075-1082
• /
• 1997

In this paper, we propose a channel assignment scheme for reducing call blocking rate in a base station(BS) of DS-CDMA cellular systems. The proposed scheme can e applied to the case where the capacity of reverse radio link is enough, but not are the available traffic channels performing the digital modulation and demodulation functions between a mobile station and the base station. The proposed scheme takes advantage of the feature of soft handoff in which a mobile station keeps its communication link even if one of the two communication links is released. The scheme estimates the mean and variance of the received power level measured at the base station before assigning a traffic channel for a new call request. The BS makes decision based on the estimated balues whether the new call request will be accepted or not. If it is decided that the capacity of reverse radio link is enough, but all traffic channels are not available, then the BS increases the soft handoff parameter T_DROP to release the traffic channels of mobile stations loactedin soft handoff area. The BS assigns the released traffic channel to anew call or a handoff call. The performance of the proposed channel assignment scheme is evaluated by computer simulation. The results show that the call blocking rate for new calls and handoff calls is reduced.

• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.456-462
• /
• 2011

This paper investigates the outage behavior of peak interference power limited cognitive radio (CR) networks with multiple transmit antennas. In CR-multi-input single-output (MISO) channel, the total transmit power is distributed over the transmitantennas. First, we use the orthogonal space-time codes (STC) to achieve the transmit diversity at CR-receiver (rx) and investigate the effect of the power distribution on the interference power received at the primary-receiver (P-rx). Then, we investigate the transmit antenna selection (TAS) scheme in which the CR system selects the best transmit antenna and allocates all the power to the selected best antenna. Two transmit antenna selection strategies are proposed depending on if feedback channel is available or not. We derive the closed form expressions of outage probability and outage capacity of all schemes with arbitrary number of transmit-antennas. We show that the proposed schemes significantly improve the outage capacity over the single antenna systems in Rayleigh fading environment. We also show that TAS based scheme outperforms the STC based scheme when peak interference power constraint is imposed on the P-rx only if a feedback channel from CR-rx to CR-transmitter is available.

• Steel and Composite Structures
• /
• v.42 no.3
• /
• pp.315-323
• /
• 2022

Shear connectors are key elements that ensure integrity in a composite system. The primary purpose of a shear connector is to bring a high degree of interaction between composite elements. A wide variety of connectors are available for hot-rolled composite construction, connected to the beam through welding. However, with cold-formed members being very thin, welding of shear connectors is not desirable in cold-formed composite constructions. Shear connectors for cold-formed elements are limited in studies as well as in the market. Hence in this study, three different types of shear connectors, namely, single-channel, double channel, and self-tapping screw, were considered, and their performance assessed by the Push-out test as per Eurocode 4. The connection between channel shear connectors and the beam was made using self-tapping screws to avoid welding. The performance of the connectors was analyzed based on their ultimate capacity, characteristic capacity, ductility, and slippage during loading. Strength to weight ratio was also carried out to understand the proposed connectors' suitability for conventional ones. The results showed relatively higher initial stiffness and ductility for double channel connectors than other connectors. Also, self-tapping screws had a higher strength to weight ratio with low ductility.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.1
• /
• pp.85-92
• /
• 2000

Channel management is critical in designing a cellular mobile system that offers high capacity and high quality. In this paper, an integrated channel management scheme is proposed, which consists of a dynamic channel allocation scheme and an admission control scheme. The dynamic channel allocation scheme allocates a call request the channel which minimizes the impact on its interfering cell, and consists of two types of channel allocation strategies : nominal channel allocation strategy and non-nominal channel allocation strategy. The admission control scheme named the variable cutoff priority scheme reserves some frequency channels for handoff cells in each cell the number of which varies according to the blocking probability of handoff class in that cell. Computationl tests are performed to evaluate the performance of the proposed scheme in terms of overall blocking probability, defined by the weighted value of the blocking probabilities of new calls and handoff calls. The results show that the proposed scheme yields better performance than other compared schemes.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.294-300
• /
• 2013

In this paper, we present performance analysis results of parametric array communication system in terms of theoretical BER and channel capacity of MIMO in underwater AWGN channel by using simplified SNR of difference frequency. The SNR of the difference frequency is calculated by using transmission loss, noise level, and source level of difference frequency in which nonlinear effect is considered. By assuming primary frequencies as 210 kHz and 190 kHz, difference frequency as 20 kHz, transducer diameter as 0.1 m, and noise level as 50 dB and the requested BER as $10^{-4}$, we obtain parametric array communication range gains over the communication system using primary frequency of 59.11 km in fresh water and 5 km in sea water, respectively. Also we obtain range gains of 38.84 km and 46.38 km in fresh water, and 3.88 km and 4.38 km in sea water when we use SISO and $2{\times}2$ MIMO parametric array communications for the channel capacity of 10 bps/Hz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10A
• /
• pp.1065-1071
• /
• 2007

In this paper, in order to research spectrum usage efficiency in urban canyon environment at the microwave band, measurement and channel capacity analysis of multi-antenna technology is described. The measurement data obtained from 3 - 4 stories building area used and the propagation characteristics at the 3.7 and 8GHz band are analysed and compared. In case of $2{\times}2$ MIMO, channel capacities of 3.7 and 8 GHz band are calculated to 9.1 bps/Hz and S bps/Hz and in case of $4{\times}4$ MIMO, 21 bps/Hz and 12.5 bps/Hz respectively. Considering the coverage, SNR and channel capacity in urban environment, MIMO propagation characteristics of 3.7 GHz are more predominate than those of 8 GHz.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.446-453
• /
• 2016

Structural capacity of water channel fabricated of concrete including blast furnace slag were investigated in this paper. An experimental study was consisted of materials test and structural test of concrete water channel. The mechanical properties of concrete including blast furnace slag were investigated. Ordinary Portland cement (OPC) was used as basic binder and the effect of the replacement of blast furnace slag for OPC was investigated. Experiments were performed to measure mechanical properties including compressive strength, elastic modulus and modulus of rupture. Test results show that the compressive strengths and modulus of ruptures of mixtures containing blast furnace slag were equivalent to those of OPC concrete. In addition, the structural capacity of concrete water channel with up to the replacement ratio of blast furnace slag of 45% was greater than the required strength in KS specification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.45-54
• /
• 2010

This paper studies the design of a multiuser multiple-input multiple-output (MIMO) system, where a base station (BS) transmits independent messages to multiple users. The remarkable "dirty paper coding (DPC)" result was first presented by Costa that the capacity does not change if the Gaussian interference is known at the transmitter noncausally. While several implementable DPC schemes have been proposed recently for single-user dirty-paper channels, DPC is still difficult to implement directly in practical multiuser MIMO channels. In this paper, we propose a network channel matrix triangulation (NMT) algorithm for utilizing interference known at the transmitter. The NMT algorithm decomposes a multiuser MIMO channel into a set of parallel, single-input single-output dirty-paper subchannels and then successively employs the DPC to each subchannel. This approach allows us to extend practical single-user DPC techniques to multiuser MIMO downlink cases. We present the sum rate analysis for the proposed scheme. Simulation results show that the proposed schemes approach the sum rate capacity of the multiuser MIMO downlink at moderate signal-to-noise ratio (SNR) values.