• Journal of Digital Contents Society
• /
• v.6 no.2
• /
• pp.101-106
• /
• 2005

In this paper, performance evaluation of mobile access layer for multiple-input multiple-output (MIMO) MultiCarrier(MC)/CDMA 16 QAM system is considered to mitigate multiple access interference and enhance system channel capacity in Rayleigh wireless fading channel. Traditionally, multi-path is viewed as an undesirable feature of wireless communications. Therefore, diversity and adaptive array schemes are proposed to mitigate its effects. Recently, to increase the spectrum efficiency and the link reliability, MIMO schemes is devised to exploit multi-path in a scattering wireless channel. In particular, the channel capacity of MIMO-MC/CDMA 16 QAM system is evaluated according to Eb/No, Mc, p. From the results, in order to improve the channel capacity, the signals at various elements must be uncorrelated. And if the paths are correlated due to inappropriate spacing or mutual coupling effects, the channel capacity of MIMO-MC/CDMA 16 QAM system becomes substantially smaller.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.408-414
• /
• 1999

In this paper, we propose the method using coherent detection with time division multiple pilot signal for each users I reverse CDMA channel as the structure of reverse CDMA channel to apply CDMA to upstream channel of bidirectional LMDS. By using coherent detection with pilot signal in reverse CDMA channel, capacity can be improved when compared with noncoherent detection, but it is required to allocate pilot signal for all user. And then interference is increased due to allocate continuously the pilot signals. In this case channel capacity is decreased. The method f pilot allocation is needed that reduce this interference and keep synchronization effect using coherent detection, In the reverse link, the pilot allocated to each users at different time and not overlapped is possible solution for it. this pilot is proposed and analyzed its performance and capacity. The result is that proposed method has more increased capacity compared wit others.

• Structural Engineering and Mechanics
• /
• v.70 no.4
• /
• pp.499-511
• /
• 2019

In this study, the axial compressive behavior of novel quadruple C-channel built-up cold-formed steel columns with different slenderness ratio was investigated, using the experimental and numerical analysis. The axial compressive capacity and failure modes of the columns were obtained and analyzed. The finite element models considering the geometry, material and contact nonlinearity were developed to simulate and analyze the structural behavior of the columns further. There was a great correlation between the numerical analyses and test results, which indicated that the finite element model was reasonable and accurate. Then influence of, slenderness ratio, flange width-to-thickness ratio and screw spacing on the mechanical behavior of the columns were studied, respectively. The tests and numerical results show that due to small slenderness ratio, the failure modes of the specimens are generally local buckling and distortional buckling. The axial compressive strength and stiffness of the quadruple C-channel built-up cold-formed steel columns decrease with the increase of maximum slenderness ratio. When the screw spacing is ranging from 150mm to 450mm, the axial compressive strength and stiffness of the quadruple C-channel built-up cold-formed steel columns change little. The axial compressive capacity of quadruple C-channel built-up cold-formed steel columns increases with the decrease of flange width-thickness ratio. A modified effective length factor is proposed to quantify the axial compressive capacity of the quadruple C-channel built-up cold-formed steel columns with U-shaped track in the ends.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.362-374
• /
• 2000

In this paper, trellis coded 16 QAM Multi-Carrior CDMA system is proposed, Using the equivalent signal-to-noise plus interference Power ratio (SNIR) of Multi-Carrier CDMA system in the reverse link, capacity and BER performance of trellis coded 16 QAM Multi-Carrier CDMA system are analyzed taking into account the number of multi-carrier, the number of multiple access user, the number of SC/MRC diversity branch, and Rician fading parameter in multiuser interference and Rician fading channel. And the capacity and the BER performance of trellis coded 16 QAM Multi-Carrier CDMA system using selection combining (SC) and maximal ratio cabining (MRC) diversity are numerically compared. Obtained results show that the capacity of proposed system depends on the number of multi-carrier. ti is found that the trellis coded 16 QAM Multi-Carrier CDMA system with SC/MRC antenna diversity scheme is efficient to combat multipath fading and to increase the maximum number of users in high speed data communication. With the results of analysis. MRC diversity technique provides the performance fro high speed data communications. Finally, we present a numerical approach to derive the capacity and the BER performance and to find the maximum number of multiple access user for Multi-Carrier system in multiuser interference and Rician fading channel.

• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.78-83
• /
• 2004

The channel-type lining board that partial welded on many partition frames is used to normal servicing lining board type. On this study is to investigate existing channel-type lining board's capacity by using the static loading test. From this study, to develop new-type lining board which reflect well cross section area and sectional modulus of existing channel-type lining board. Six types FEM model are adopted. The accumulated test results of stress conditions and deflections by section shapes will be used to analyzed the relation between the capacity and the section shape. With the comparing the results of static loading test and FEM analysis.

• ETRI Journal
• /
• v.28 no.5
• /
• pp.688-691
• /
• 2006

This letter addresses the superimposed pilot aided multiuser channel estimation for the uplinks of multi-input multi-output orthogonal frequency-division multiplexing systems. To mitigate the embedded-data effects on the performance of channel estimation, a novel combining algorithm is proposed. Optimal pilot symbols are developed with respect to the least square channel estimate's mean square error. The averaged sum-capacity lower bound is derived and simulated. Simulation results show that on a low signal-to-noise ratio regime, our proposed scheme achieves better performance and higher capacity than the conventional pilot aided approach.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1992.06a
• /
• pp.684-687
• /
• 1992

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.117-124
• /
• 2015

Recently an opportunistic incremental relaying (OIR) system has been studied for improving the performance degradation in fading channel. However there are few studies on power control in the system, and the studies are assumed perfect knowledge of the all channels at transmitters. The assumption that the source know all channel information is difficult in practical channels. Therefore, in this paper we assume that the source knows partial channel information and propose a modified truncated channel inversion (TCI) power control scheme for the OIR system. We derive the channel capacity of the proposed system and perform Monte Carlo simulation. It is noticed that the proposed OIR system has better capacity than that of the power controlled system with direct path only, and the capacity increases with the number of relays. The power controlled OIR system gained more capacity of 29.7%, 32.7%, and 33.5% than that of the system with direct path only for the number of relays of 1, 3, and 5, respectively. The results from this paper can be applied to the estimation of a theoretical capacity for the currently operating cellular systems when they adopt the IOR system.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.3
• /
• pp.341-345
• /
• 2010

WMN is one of efficient solutions to provide Internet services for users by forming wireless backbone networks with wireless links. The dominant technology for WMNs is the IEEE 802.11, which provides multi-channel and multi-rate capabilities. One of important issues in WMNs is the network capacity and it is essential to design a multi-channel protocol that leverages the network capacity. However, when wireless links that use different data rates operate on the common channel, the performance of high-rate links is severely degraded by the presence of the low-rate links, which is often referred as performance anomaly. In this paper, we propose a Tree-based Channel Assignment (TreeCA) protocol to mitigate the performance anomaly problem by distributing data rates over multiple channels. TreeCA performs channel assignments based on the tree WMN architecture to accommodate the Internet traffics efficiently. Parent nodes on the tree distribute their child nodes over multiple channels so that the performance anomaly is reduced. Through simulations, we observed that the proposed TreeCA outperforms the existing multi-channel protocols for WMNs.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.723-729
• /
• 2011

In this paper, we simulate and evaluate the performance of MIMO systems adopting MMSE-OSUC receiver algorithm under Rayleigh fading channel environment. In the simulation, BPSK, QPSK, 16QAM, and 64QAM modulation is used with frame length of 100 symbols. First, the concept of MIMO is introduced by the analytical basis of the channel capacity of MIMO system. From the performance analysis results, the channel capacity is identified by the function of channel and it is affected by the channel characteristic. Next, based on this approach, the algorithm for performance evaluation over MIMO channel was analyzed. From the performance analysis results, it is found that MMSE-OSUC receiver algorithm generally outperform conventional ZF-OUSC receiver algorithm in performance but the performance difference between the two algorithms is reduced as modulation scheme with larger constellation point is used.