• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제24권11호
• /
• pp.1497-1505
• /
• 2000

A numerical study is made on the ice-formation for a laminar flow in a curved channel. When the water flows through the curved channel with the walls specified below the freezing temperature, the ice layer has been formed on the curved surface, different from that of a straight channel. The fluctuation of ice layer has been predicted, considering the variation of velocity and temperature near the curved portion of channel. The study also takes into account the interaction existing between the laminar flow and the curved channel. In the solution strategy, the present study is substantially different from the existing works in that the complete set of governing equations in both the solid and liquid regions are resolved. The results from this study have been mainly presented, focusing on the variation of ice layer close to the curved portion. Numerical results have been obtained parametrically by varying the curved angle and the radius of curvature of channel, in addition to the variation of Reynolds numbers and wall temperatures of channel. The results show that the curved shape of channel has the great effect on the thickness of the solidification layer. The wave of ice layer thickness appears in the vicinity of curved portion. This behavior of ice layer has been amplified as is the increasing of curved angle and the radius of curvature of channel. In addition, the ice layer becomes thin as Reynolds numbers in increasing. And also, as the wall temperature of channel increases, the width of channel becomes to be shrunk due to the growth of ice layers in the upper and lower wall of channel.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제44권10호
• /
• pp.110-118
• /
• 2007

In multi-hop wireless network, multi-channel makes it possible to enhance network performance because it reduces channel interferences md contentions. Recently several schemes have been proposed in the literatures to use multi-channel. Especially, MCR(Multi channel routing protocol), which utilize hybrid interface assignment, is a prominent routing protocol. MCR uses simple way to change channel but efficiently reduce channel interferences. In this paper, we propose a load-aware channel selection algorithm called LCS that enhances the channel switching algerian used in MCR protocol. In LCS, channel of a node is assigned based on collected information about queue length of neighbors. Moreover this paper evaluates the performance of in by using simulation test and testbed demonstration. Test results show that the MCR with LCS outperforms the naive MCR.

• Journal of the Korea Society of Computer and Information
• /
• 제16권2호
• /
• pp.207-215
• /
• 2011

Due to the increasing availability and popularity of digital television (DTV), the numbers of TV channels and programs that can be selected by consumers are also increasing rapidly. Therefore, searching for interesting channels and program via remote controls or channel guide maps can be frustrating and slow. In this paper, in order to better satisfy consumers, we propose a dynamic channel surfing scheme that reduces the channel seek distance in DTV. The proposed scheme dynamically rearranges the channel sequences according to the channel currently being watched to reduce the channel seek distance. The results of a simulation experiment demonstrate that the proposed dynamic channel surfing scheme reduces the channel seek distance for DTV channel navigation when up-down channel selection interfaces are used.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.269-274
• /
• 2011

A CFD analysis was performed to examine the inner channel blockage of dual-cooled fuel which has being developed for the power uprate of a pressurized water reactor (PWR). The dual-cooled fuel consists of an annular fuel pellet($UO_2$) and dual claddings as well as internal and external cooling channels. The dual-cooled annular fuel is different from a conventional solid 려el by employing an internal cooling channel for each fuel pellet as well as an external cooling channel. One of the key issues is the hypothetical event of inner channel blockage because the inner channel is an isolated flow channel without the coolant mixing between the neighboring flow channels. The inner channel blockage could cause the Departure from Nucleate Boiling (DNB) in the inner channel that eventually causes a fuel failure. This paper presents the CFD simulation of the flow through the side holes of the bottom end plug for the complete entrance blockage of the inner channel. Since the amount of coolant supply to the inner channel depends on largely the pressure loss at the side hole, the pressure loss coefficient of the side hole was estimated by the CFD analysis. The CFD prediction of the loss coefficient showed a reasonable agreement with an experimental data for the complete blockage of both the inner channel entrance and the outer channel. The CFD predictions also showed the decrease of the loss coefficient as the outer channel blockage increases.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제19권1호
• /
• pp.114-120
• /
• 2020

In this study, the process of freezing around two consecutively arranged channel tubes used for evaporator heat exchange was numerically investigated. Numerical results confirmed that the vortex occurred between the front channel and the rear channel and also that the vortex occurred due to the rapid change of the channel at the rear of the rear channel. These vortices were found to play a role in reducing the ice layer to some extent by the growth of the ice layer at the front and rear of the channel tube. The freezing layer showed a tendency to gradually increase as it passed through the channel pipe. As the wall temperature in the channel pipe decreased, the thickness of the freezing layer increased. As the flow rate of water slowed, the thickness of the freezing layer became thicker. In particular, in the case of a slow flow rate of 0.03 m/s, the freezing layers of the front channel pipe and the rear channel pipe were connected to each other. The narrower the channel, the thinner the freezing layer was in both the front and rear channel tubes. It is found that these thin freezing layers are caused by the low thickness of the temperature boundary layer formed around the channel tube.

• Asia Marketing Journal
• /
• 제15권2호
• /
• pp.29-47
• /
• 2013

Distribution channel decisions involve long-term commitments with other firms that are very difficult to change or replace. In particular, marketing channel decisions in emerging markets are much more complicated due to unfamiliar conditions and problems such as lack of market data and distribution systems. Therefore, when a company considers changing or introducing a marketing channel in an area, it is much more difficult to judge its effectiveness in an emerging market than in a developed market. In this study, we investigate the development process of a new direct marketing channel of Hongfu Fertilizer Company (hereafter Hongfu), a medium-sized Chinese fertilizer manufacturer, and propose an approach to test the feasibility of this new marketing channel in the Chinese rural market. We measure the effectiveness of Hongfu's new marketing channel from two perspectives: i) from customers' perspective through direct responses of farmers, which showed that a new channel can increase the convenience and lower the purchasing costs for the farmers, and ii) from the company's perspective, by calculating the incremental profit of the company using the expansion factor (T/Q) method, which suggested that the execution of Hongfu's strategy to expand a new marketing channel will result in an increase in profits. The results of this study contribute to the development of a methodology to test the feasibility of a new direct marketing channel in the emerging markets such as the Chinese rural market. Traditional and indirect distribution channels in emerging markets are generally not very efficient and difficult to change. Especially, in emerging markets, like the Chinese rural market, the methods of testing channel feasibility must be different from that of developed markets. Considering market situations, market experiments can be more effective then systematic market surveys in testing channel feasibility in emerging markets. This study implies that managers must learn to cope with a transition from the traditional marketing channels in emerging markets. With the development in farmers' understanding of marketing concept, the transition from traditional marketing channel is unavoidable for all firms. Farmers in China are generally very conservative, however, their buying behaviors are changing. Therefore, fertilizer companies should try to adjust in accordance with farmers' demand characteristics that the efforts to meet the economic needs of farmers with new marketing channels as well as trust building are critical in the near future.

• ETRI Journal
• /
• 제9권1호
• /
• pp.118-124
• /
• 1987

Short channel n-MOSFET의 드레인-소오스 사이의 breakdown은 단순한 접합 breakdown이 아닌 avalanche-induced breakdown으로 p-MOSFET, long channel n-MOSFET의 breakdown 전압보다 훨씬 작은 값을 갖는다. Short channel n-MOSFET의 breakdown의 특징은 current-controlled 부저항 특성(snapback)이 나타나고, 게이트 전압에 따라 breakdown 전압보다 작은 sustainning 전압이 존재한다. 이와 같은 sustainning 전압은 short channel n-MOSFET의 안정한 동작에 또 하나의 제한 요소가 될 수 있다. 따라서 공정 및 회로 시뮬레이션을 위해, short channel n-MOSFET의 avalanche breakdown 현상에 대한 정확한 분석이 요구된다. Short channel n -MOSFET의 avalanche breakdown 현상을 분석하기 위해서Parasitic bipolar transistor를 도입한 분석적 모델을 이용하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 2012년도 한국컴퓨터종합학술대회논문집 Vol.39 No.1(D)
• /
• pp.187-189
• /
• 2012

The medium access control (MAC) protocol is designed only for single channel in the IEEE 802.11 standard. That means the throughput of the network is limited by the bandwidth of the single channel. The multiple channels can be exploited to get more concurrent transmission. In this paper, we propose a novel Multi-channel MAC that utilizes the channel more efficiently than other Multi-channel MAC protocols.

• East Asian mathematical journal
• /
• 제29권1호
• /
• pp.101-107
• /
• 2013

We consider a cognitive network with a primary and a secondary channel. Primary users have higher priority on the usage of the primary channel, and secondary users are allowed to opportunistically access the primary channel at times when the channel is not occupied by primary users. The secondary channel is dedicated only to secondary users. An analytical model is presented to obtain the performance of an opportunistic spectrum access using both the primary and secondary channels, and is validated by simulations.

• ETRI Journal
• /
• 제37권1호
• /
• pp.11-20
• /
• 2015

This paper deals with optimal power allocation for channel estimation of orthogonal frequency-division multiplexing uplinks in time-varying channels. In the existing literature, the estimation of time-varying channel response in an uplink environment can be accomplished by estimating the corresponding channel parameters. Accordingly, the optimal power allocation studied in the literature has been in terms of minimizing the mean square error of the channel estimation. However, the final goal for channel estimation is to enable the application of coherent detection, which usually means high spectral efficiency. Therefore, it is more meaningful to optimize the power allocation in terms of capacity. In this paper, we investigate capacity with imperfect channel estimation. By exploiting the derived capacity expression, an optimal power allocation strategy is developed. With this developed power allocation strategy, improved performance can be observed, as demonstrated by the numerical results.