• Tribology and Lubricants
• /
• v.26 no.5
• /
• pp.297-302
• /
• 2010

This study is focused on the resin layer formation of UV imprinting process by changing imprinting pressure and period. The mold shape is made for the process of window open over the pattern transfer area and the imprinting period is assigned as the time just before the UV light curing. The residual layer is measured by changing the imprinting period and pressure magnitude, and the measured data of residual layer provides useful information for the design of the process conditions of imprinting processes.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.940-952
• /
• 2007

It is found that there are many serious errors in deriving the existing governing equations of motion for a wheel-axle set negotiating an arbitrarily changing radius curve by Vijay K. Garg and Rao V. Dukkipati. Among other things, despite the hypothesis on arbitrarily changing radius of curve, there had been no taking a time derivative of the radius R in the first half of the derivation. Even if the D'lambert force arising from the centrifugal acceleration of vehicle body or bogie was appropriately taken into account while calculating cant deficiency, it is unnecessarily duplicated in the force vectors of governing equations. The graphical model given in Fig. 5.15 is not enough to follow those developed expressions from both physical and structural points of view. Besides, there are some blunders in assigning plus or minus sign not to be regarded as simple typographic ones and similar mistakes are committed in deriving creep force expressions as in the case of a wheel-axle set on a tangent track.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.269-272
• /
• 2007

The shortcut shot detection based on MPEG compressed video bitstream is presented in this paper. The detection algorithm is used the video picture frame from MPEG compressed video directly not to be decompressed the original image. For shortcut detection, I and P frame of MPEG video bitstream are classified. The changing scene cuts at I pictures are detected by the decompressed DC image and scene cuts at P picture frame by monitoring the percentage of intra-macroblocks per P picture are detected. Experimental results using test video bitstream QVGA results in average 92% detection rate, searching time is taken around 4.5 times faster in comparison with changing scene shot detection algorithm which is decompressed the compressed bitstream.

• Journal of Drive and Control
• /
• v.19 no.3
• /
• pp.47-52
• /
• 2022

The C-ITS (Cooperative-intelligent Transport System) is a driver assistance system that prevents car accidents and enhances traffic conditions, via sharing traffic information between vehicles and roadway infrastructures. A CLAS (changing lane assistance system) for unprotected left-turn, is a C-ITS that assists a driver with safely changing lanes. This system addresses a driver's critical gap, that enables the system to express a driver's uncertainty. A driver's critical gap is a time that can be used in a threshold, to change a lane or not. Unfortunately, a driver's critical gap is difficult to use in a CLAS directly. This paper addresses a driver's critical gap, and how it can be applied in a CLAS for an unprotected left-turn.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.853-855
• /
• 2006

Today, the Publishing world goes to meet 'U-Publishing' which means the time of 'Ubiquitous Publishing 'in the Latin language. The concept of book evolves into the concept of U-Book beyond the concept of e-book from the concept of paper media book of the past Although the concept of book changes according to the times and media, there are design values which is changing and which isn't changing. We can regard these points of views as the immediate and the ultimate value. The immediate value means the values of the present time which explains the sprit of the time, and the ultimate value means what will not change beyond the time in spite of the difference of media which delivers design. This paper deals with the design of U-book concept which has been appear since 2n5 from the standpoint of the immediate and the ultimate value.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.537-542
• /
• 2000

Wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of STD-11 in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension. The deflection is the smallest at the speed of wire of 10.6m/min and the water specific resistivity of 5k$\Omega$.cm. The deflection is found to be decreased as increasing dwell time. But if the water pressure is high, it is found not to be changed after the vibration of 4sec. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, is observed for rough wire-cutting EDM of STD-11. This phenomena is found to be similar in spite of the change of EDM energy level. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.1
• /
• pp.107-122
• /
• 2015

The purpose of this study is to analyze the structural stability of pavement due to water infiltration at the road with infiltration trench as using the FEM(finite element analysis). Five cases for FEM is divided considering the amount of rainfall and rain duration time. The results of FEM show that the more rainfall in a short period time is faster the change of moisture content. Also, it is the proportional relationship between and changing area of moisture content of more than 40% due to rainfall. Case 3 and 4 are necessary to check the installation of infiltration trench because of moisture content of more than 40%, recovery time of initial moisture content, and changing area of more than 40%. Case 1,2, and 5 have no a significant effect on road pavement structure due to lower moisture content and shorter duration time of higher moisture content.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.169-174
• /
• 2013

In counterfire warfare, it is important to detect and attack enemy targets faster than the enemy using sensing The grided environmental data is usually provided by the numerical simulation coupled with a data assimilation technique and various inter- or extrapolation algorithms, both of which are based on the observation spanning from simple equipments to satellites. In order to employ the gridded environmental data in the M&S system frequently cutting area and changing its resolution, interpolation algorithms such as linear, cubic spline, IDW, and Kriging methods are necessary to apply. These methods, however, require much time in the M&S system. This paper introduces a technic to reduce time to change the resolution of data. using the binary search method, which finds a point to interpolate quickly and interpolate data in the vicinity of. We also show the efficiency of proposed methods by way of measuring the respective elapsed times.

• Journal of the Korean Society of Combustion
• /
• v.21 no.4
• /
• pp.16-22
• /
• 2016

Pressure and temperature variations in a shock tube have been studied numerically by changing the diameter ratio of a driven part to a driver part. There are five cases where the adopted diameter ratios are 40%, 50%, 60%, 80%, and 100% respectively. The diameter of the driver part remains unchanged meanwhile the shock tube driven part diameter increases from 40% to 100% of the driver part. In the 100% ratio case, the driver part and driven parts have the same diameter of 66.9 mm. As the diameter ratio decreases, the pressure in the shock tube and available test time are increased.

• Korean Institute of Interior Design Journal
• /
• no.14
• /
• pp.63-73
• /
• 1998

The aim of this study is to understand and redefine the nature of architectural environment within the paradigm of natural science. The chaos theory non-equilibrium thermodynamics theory self-organization of modern physics offer new insights to explain not only natural phenomena but also to define creative and dynamic architectural environment. First natural laws in modern physics like the arrow of time but is related not only with certainty but also possibility so nature is understood as a constantly changing process of evolution. Second the new architectural environment is defined as a kind of fluid and irreducible organic biosytem that cannot be fully understood by modernist idea of architecture. It is conceived of as a fluid constantly changing self-oraganizing system that consists of different situations events movements and programs in uncertain and irreducible time frame. Third insights and implications of natural science offer new language and strategy for design and the two disciplines can be understood as interdependent and co-evolving