DOI QR코드

DOI QR Code

A Numerical Study on Pressure Variation in a Shock Tube by Changing the Diameter Ratio of Low-Pressure (Driven) to High-Pressure (Driver) Part

충격파관 저압실/고압실 직경비에 따른 압력변동에 대한 수치해석

  • Wang, YuanGang (Department of Mechanical Engineering, Sejong University) ;
  • Kim, Chul Jin (Department of Mechanical Engineering, Sejong University) ;
  • Sohn, Chae Hoon (Department of Mechanical Engineering, Sejong University) ;
  • Jeung, In-Seuck (Department of Aerospace Engineering, Seoul National University)
  • Received : 2016.09.01
  • Accepted : 2016.10.12
  • Published : 2016.12.30

Abstract

Pressure and temperature variations in a shock tube have been studied numerically by changing the diameter ratio of a driven part to a driver part. There are five cases where the adopted diameter ratios are 40%, 50%, 60%, 80%, and 100% respectively. The diameter of the driver part remains unchanged meanwhile the shock tube driven part diameter increases from 40% to 100% of the driver part. In the 100% ratio case, the driver part and driven parts have the same diameter of 66.9 mm. As the diameter ratio decreases, the pressure in the shock tube and available test time are increased.

Keywords

References

  1. Phipippe Dagaut, On the kinetics of hydroncarbons oxidation from natural gas to kerosene and diesel fuel, Phys. Chem. Chem. Phys, 2002, 2079-2094.
  2. NanBei, The Development of High Pressure Shock Tube and Experimental Study on Ignition Delay of Hydrocarbon, Shanghai jiaotong University, Master's thesis, 2011, 2-7.
  3. Tae Hyung Kim, Oh Boong Kwon, Jeong Park, Sang-In Keel, Jin-Han Yun and Jong Ho Park, A Study on Flame Extinction in Oxymethane Combustion, J. Korean Soc. Combust., 20 (2015), 34-41. https://doi.org/10.15231/jksc.2015.20.4.034
  4. Robert S. Tranter, Binod R. Giri and John H. Kiefer, Shock tube/time-of-flight mass spectrometer for high temperature kinetic studies, Review of scientific instruments, 78 (2007), No. 034101. https://doi.org/10.1063/1.2437150
  5. A. E.L. Bakali, P. Dagaut, L. Pillier and P. Meunier, Experimental and modeling study of the oxidation of natural gas in a premixed flame, shock tube, and jet-stirred reactor, Combustion and Flame, 137 (2004), 109-128. https://doi.org/10.1016/j.combustflame.2004.01.004
  6. William Adolph Crede, The design and construction of a shock tube facility, Missouri university of science and technology, Master's thesis, 1965.
  7. Amrollah Moradi, Fata Mohammadi Fard, Mahmoud Mani, Mohamadali Ranjbar, Mobin Mottaghipour, "Experimental and numerical investigation of AUT shock tube", European Journal of Experimental Biology, 2 (2012), 1820-1826.
  8. ANSYS Inc., ANSYS Fluent Theory Guide, 2015.
  9. Y. Bartosiewicz, Zine Aidoun, P. Desevaux, Y ves Mercadier, Numerical and experimental investigations on supersonic ejectors, International Journal of Heat and Fluid Flow, 26 (2005), 56-70. https://doi.org/10.1016/j.ijheatfluidflow.2004.07.003
  10. Ronald K. Hanson, Shock Tube Techniques, Lecture Note 11, Combution Energy Frontier Research Center of Princeton University, 2013.
  11. Subith S. Vasu, David F. Davidson, Ronald K. Hanson, Jet fuel ignition delay times: Shock tube experiments over wide conditions and surrogate model predictions, Combustion and Flame, 152 (2008), 125-143. https://doi.org/10.1016/j.combustflame.2007.06.019
  12. Sandeep Gowdagiri, Weijing Wang, Matthew A. Oehlschlaeger, A shock tube ignition delay study of conventional diesel fuel and hydroprocessed renewable diesel fuel from algal oil, Fuel, 128 (2014), 21-29. https://doi.org/10.1016/j.fuel.2014.02.064
  13. Subith S. Vasu, David F. Davidson, Ronald K. Hanson, Jet fuel ignition delay times: Shock tube experiments over wide conditions and surrogate model predictions, Combustion and flame, 1522008, 21-29.

Cited by

  1. 충격파관을 이용한 메탄/산소 혼합기의 점화지연시간 측정 vol.22, pp.1, 2016, https://doi.org/10.15231/jksc.2017.22.1.008
  2. A Numerical Study on Gas Mixing Time in a Low-Pressure (Driven) Section of a Shock Tube vol.22, pp.3, 2016, https://doi.org/10.15231/jksc.2017.22.3.023