• Tribology and Lubricants
• /
• 제26권5호
• /
• pp.297-302
• /
• 2010

This study is focused on the resin layer formation of UV imprinting process by changing imprinting pressure and period. The mold shape is made for the process of window open over the pattern transfer area and the imprinting period is assigned as the time just before the UV light curing. The residual layer is measured by changing the imprinting period and pressure magnitude, and the measured data of residual layer provides useful information for the design of the process conditions of imprinting processes.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.940-952
• /
• 2007

It is found that there are many serious errors in deriving the existing governing equations of motion for a wheel-axle set negotiating an arbitrarily changing radius curve by Vijay K. Garg and Rao V. Dukkipati. Among other things, despite the hypothesis on arbitrarily changing radius of curve, there had been no taking a time derivative of the radius R in the first half of the derivation. Even if the D'lambert force arising from the centrifugal acceleration of vehicle body or bogie was appropriately taken into account while calculating cant deficiency, it is unnecessarily duplicated in the force vectors of governing equations. The graphical model given in Fig. 5.15 is not enough to follow those developed expressions from both physical and structural points of view. Besides, there are some blunders in assigning plus or minus sign not to be regarded as simple typographic ones and similar mistakes are committed in deriving creep force expressions as in the case of a wheel-axle set on a tangent track.

• Journal of information and communication convergence engineering
• /
• 제5권3호
• /
• pp.269-272
• /
• 2007

The shortcut shot detection based on MPEG compressed video bitstream is presented in this paper. The detection algorithm is used the video picture frame from MPEG compressed video directly not to be decompressed the original image. For shortcut detection, I and P frame of MPEG video bitstream are classified. The changing scene cuts at I pictures are detected by the decompressed DC image and scene cuts at P picture frame by monitoring the percentage of intra-macroblocks per P picture are detected. Experimental results using test video bitstream QVGA results in average 92% detection rate, searching time is taken around 4.5 times faster in comparison with changing scene shot detection algorithm which is decompressed the compressed bitstream.

• 드라이브 ㆍ 컨트롤
• /
• 제19권3호
• /
• pp.47-52
• /
• 2022

The C-ITS (Cooperative-intelligent Transport System) is a driver assistance system that prevents car accidents and enhances traffic conditions, via sharing traffic information between vehicles and roadway infrastructures. A CLAS (changing lane assistance system) for unprotected left-turn, is a C-ITS that assists a driver with safely changing lanes. This system addresses a driver's critical gap, that enables the system to express a driver's uncertainty. A driver's critical gap is a time that can be used in a threshold, to change a lane or not. Unfortunately, a driver's critical gap is difficult to use in a CLAS directly. This paper addresses a driver's critical gap, and how it can be applied in a CLAS for an unprotected left-turn.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 추계 종합학술대회 논문집
• /
• pp.853-855
• /
• 2006

현재 출판계는 'U-출판', 라틴어로는 '유비쿼터스(Ubiquitous)출판' 시대를 맞이하였다. 책의 개념이 전통적인 종이책(paper media book) 개념에서, e-북 개념을 넘어 U-북 개념으로 발전하고 있다. 그러나 시대에 따라 매체에 따라 책의 개념이 바뀌어도 변하는 디자인적 가치와 변하지 않은 디자인적인 가치가 있다. 이러한 관점을 즉시(the immediate)와 항상적(the ultimate)가치라고 할 수 있다. 즉시(the immediate)는 시대정신을 표현하는 현시대의 가치를 의미하고, 항상적인 가치는 디자인을 전달하는 매체의 차이에도 불구하고 시대를 초월하여 변하지 않는 것을 의미한다. 본 연구에서는 2005년부터 시작된 U-북 개념의 디자인을 즉시와 항상적인 가치의 관점에서 연구하고자 한다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.537-542
• /
• 2000

Wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of STD-11 in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension. The deflection is the smallest at the speed of wire of 10.6m/min and the water specific resistivity of 5k$\Omega$.cm. The deflection is found to be decreased as increasing dwell time. But if the water pressure is high, it is found not to be changed after the vibration of 4sec. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, is observed for rough wire-cutting EDM of STD-11. This phenomena is found to be similar in spite of the change of EDM energy level. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• 상하수도학회지
• /
• 제29권1호
• /
• pp.107-122
• /
• 2015

The purpose of this study is to analyze the structural stability of pavement due to water infiltration at the road with infiltration trench as using the FEM(finite element analysis). Five cases for FEM is divided considering the amount of rainfall and rain duration time. The results of FEM show that the more rainfall in a short period time is faster the change of moisture content. Also, it is the proportional relationship between and changing area of moisture content of more than 40% due to rainfall. Case 3 and 4 are necessary to check the installation of infiltration trench because of moisture content of more than 40%, recovery time of initial moisture content, and changing area of more than 40%. Case 1,2, and 5 have no a significant effect on road pavement structure due to lower moisture content and shorter duration time of higher moisture content.

• 한국군사과학기술학회지
• /
• 제16권2호
• /
• pp.169-174
• /
• 2013

In counterfire warfare, it is important to detect and attack enemy targets faster than the enemy using sensing The grided environmental data is usually provided by the numerical simulation coupled with a data assimilation technique and various inter- or extrapolation algorithms, both of which are based on the observation spanning from simple equipments to satellites. In order to employ the gridded environmental data in the M&S system frequently cutting area and changing its resolution, interpolation algorithms such as linear, cubic spline, IDW, and Kriging methods are necessary to apply. These methods, however, require much time in the M&S system. This paper introduces a technic to reduce time to change the resolution of data. using the binary search method, which finds a point to interpolate quickly and interpolate data in the vicinity of. We also show the efficiency of proposed methods by way of measuring the respective elapsed times.

• 한국연소학회지
• /
• 제21권4호
• /
• pp.16-22
• /
• 2016

Pressure and temperature variations in a shock tube have been studied numerically by changing the diameter ratio of a driven part to a driver part. There are five cases where the adopted diameter ratios are 40%, 50%, 60%, 80%, and 100% respectively. The diameter of the driver part remains unchanged meanwhile the shock tube driven part diameter increases from 40% to 100% of the driver part. In the 100% ratio case, the driver part and driven parts have the same diameter of 66.9 mm. As the diameter ratio decreases, the pressure in the shock tube and available test time are increased.

• 한국실내디자인학회논문집
• /
• 제14호
• /
• pp.63-73
• /
• 1998

The aim of this study is to understand and redefine the nature of architectural environment within the paradigm of natural science. The chaos theory non-equilibrium thermodynamics theory self-organization of modern physics offer new insights to explain not only natural phenomena but also to define creative and dynamic architectural environment. First natural laws in modern physics like the arrow of time but is related not only with certainty but also possibility so nature is understood as a constantly changing process of evolution. Second the new architectural environment is defined as a kind of fluid and irreducible organic biosytem that cannot be fully understood by modernist idea of architecture. It is conceived of as a fluid constantly changing self-oraganizing system that consists of different situations events movements and programs in uncertain and irreducible time frame. Third insights and implications of natural science offer new language and strategy for design and the two disciplines can be understood as interdependent and co-evolving