• Journal of the Mineralogical Society of Korea
• /
• v.9 no.2
• /
• pp.64-70
• /
• 1996

Early weathering products of anorthosite were investigated by using scanning electron microscopy in order to trace the development of halloysite particles and aggregates. Tiny short tubes or spheres precipitate on the plagioclase surface in the initial stage of weathering and form the compact globular aggregates. With continued growth, several globules are coalesced into wrinkled halloysite aggregates, and short tubes or spheres in globules grow into long tubes forming sheaf-like aggregates. Particle shape of halloysite varies with changing supersaturation degree of weathering solution, and determines the morphology of halloysite aggregates.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.505-507
• /
• 2001

자바의 벡터는 크기가 스스로 확장되는 배열 기능을 가지는 클래스이다. [9] 벡터는 그 사용상의 편려함 때문에 자바 프로그램에서 자주 쓰인다. [2] 그러나 벡터는 제공하는 두 가지 크기 확장방식이 성능면에서 각각 지나치게 시간 흑은 공간 소비적이라는 문제점을 가진다. 이를 해결하기 위해 제안하는 새로운 두개의 벡터 생성자는 확장에 사용되는 확장배수를 사용자가 임으로 조절할 수 있게 해준다. 이를 통하여 사용자는 벡터의 크기확장 시 기존에 많이 사용되는 지나친 공간 소비적 방식을 시간, 공간의 병행적인 소비 방식으로 바꿀 수 있으므로 각각 상황에 알맞은 벡터의 확장방식을 선택하여 사용할 수 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.26-26
• /
• 2009

Vertically aligned arrays of mm-long multi-walled carbon nanotubes (MWCNTs) on Si substrates have been synthesized by water-assisted thermal chemical vapor deposition (CVD). The growth of CNTs was investigated by changing the experimental parameters such as growth temperature, growth time, gas composition, annealing time, catalyst thickness, and Al underlayer thickness. The 0.5-nm-thick Fe served as catalyst, underneath which Al was coated as a catalyst support as well as a diffusion barrier on the Si substrate. We grew CNTs by adding a little amount of water vapor to enhance the activity and the lifetime of the catalyst. Al was very good at producing the nm-size catalyst particles by preventing "Ostwald ripening". The Al underlayer was varied over the range of 15~40 nm in thickness. The optimum conditions for the synthesis parameters were as follows: pressure of 95 torr, growth temperature of $815^{\circ}C$, growth for 30 min, 60 sccm Ar + 60 sccm $H_2$ + 20 sccm $C_2H_2$. The water vapor also had a great effect on the growth of CNTs. CNTs grew 5.03 mm long for 30 min with the water vapor added while CNTs were 1.73 mm long without water vapor at the same condition. As-grown CNTs were characterized by using scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), and Raman spectroscopy. High-resolution transmission electron microscopy showed that the as-grown CNTs were of ~3 graphitic walls and ~6.6 nm in diameter.

• Advances in materials Research
• /
• v.3 no.3
• /
• pp.163-174
• /
• 2014

In this study, fatigue properties and crack growth characteristics of a polycarbonate (PC) were examined during cyclic loading at various mean stress (${\sigma}_{amp}$) and stress amplitude (${\sigma}_{mean}$) conditions. Different S vs. N and da/dN vs. ${\Delta}K$ relations were obtained depending on the loading condition. The higher fatigue strength and the higher resistance of crack growth are seen for the PC samples cyclically loaded at the higher mean stress and lower stress amplitude due to the low crack driving force. Non-linear S - N relationship was detected in the examination of the fatigue properties with changing the mean stress. This is attributed to the different crack growth rate (longer fatigue life): the sample loaded at the high mean stress with lower stress amplitude. Even if the higher stress amplitude, the low fatigue properties are obtained for the sample loaded at the higher mean stress. This was due to the accumulated strain energy to the sample, where severe plastic deformation occurs instead of crack growth (plasticity-induced crack closure). Shear bands and discontinuous crack growth band (DGB) are observed clearly on the fracture surfaces of the sample cyclically loaded at the high stress amplitude, where the lower the ${\sigma}_{mean}$, the narrower the shear band and DGB. On the other hand, final fracture occurred instantly immediately after the short crack growth occurs in the PC sample loaded at the high mean with the low ${\sigma}_{amp}$, i.e., tear fracture, in which the shear bands and DGB are not seen clearly.

• Journal of Environmental Science International
• /
• v.31 no.9
• /
• pp.793-801
• /
• 2022

This study was carried out to provide basic data for logical forest management by developing a site index curve reflecting the current growth characteristics of Cryptomeria japonica stands in Korea. The height growth model was developed using the Chapman-Richards, Schumacher, Gompertz, and Weibull algebraic difference equations, which are widely used in growth estimation, for data collected from 119 plots through the 7th National Forest Inventory and stand survey. The Chapman-Richards equation, with the highest model fit, was selected as the best equation for the height growth model, and a site index curve was developed using the guide curve method. To compare the developed site index curve with that on the yield table, paired T-tests with a significance level of 5% were performed. The results indicated that there were no significant differences between the site index curve values at all ages, and the p-value was smaller after the reference age than before. Therefore, the site index curve developed through this study reflects the characteristics of the changing growth environment of C. japonica stands and can be used in accordance with the site index curve on the current yield table. Thus, this information can be considered valuable as basic data for reasonable forest management.

• Journal of Korea Foundry Society
• /
• v.11 no.3
• /
• pp.236-244
• /
• 1991

This paper describes a study of the nucleation and growth of graphite crystal of levitation melted high purity Fe-C-Si alloys with emphasis on hypereutectic composition. Spherulitic graphite was observed to form at high purity alloy and converted to compacted by changing the starting iron from ultra-pure zone refined iron to 99.95 pct electrolitic iron. Residual C-C clusters might be acting as an effective nucleation site for graphite, and sulphur was the element to prevent graphite from nucleating. The graphite morphology changed from compacted to spherulitic as the sulphur content decreased.

• Journal of Integrative Natural Science
• /
• v.5 no.4
• /
• pp.211-215
• /
• 2012

Single-crystalline silicon nanowire arrays (SiNWAs) using electroless metal-assisted etchings of p-type silicon were successfully fabricated. Ag nanoparticle deposition on silicon wafers in HF solution acted as a localized micro-electrochemical redox reaction process in which both anodic and cathodic process took place simultaneously at the silicon surface to give SiNWAs. The growth effect of SiNWs was investigated by changing of etching times. The morphologies of SiNWAs were obtained by SEM observation. Well-aligned nanowire arrays perpendicular to the surface of the silicon substrate were produced. Optical characteristics of SiNWs were measured by FT-IR spectroscopy and indicated that the surface of SiNWs are terminated with hydrogen. The thicknesses and lengths of SiNWs are typically 150-250 nm and 2 to 5 microns, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.410-410
• /
• 2012

The continuous monolayer graphene was synthesized on electro-polished copper foil. Electro-polishing sticks off the coating layer of copper foil, which prevents the continuous graphene growth. The quality of continuous graphene is dependent on roughness of copper foil. Copper foil roughness could be controlled by changing polishing condition. The effects of working voltage (4-6 V) and time (30-70 sec) for electro-polishing were systematically examined. The change of surface roughness was checked with AFM.

• World Technopolis Review
• /
• v.1 no.3
• /
• pp.186-191
• /
• 2012

To understand South Korea's economic success several contending paradigms have emerged, ranging from a neo-classical explanation to a statist perspective, and Schumpeterian structuralism. The Korean miracle can be seen as a product of multiple factors involving the strategic choice of export-led growth, timely and active human-capital investment, business activism, and individual innovative ideas. However, South Korea needs more complex and innovative ideas to continue its both economic growth and S&T Development. The ideas of Schumpeterian structuralist needs to be more emphasized. Changing state-society relations and subsequent policy choice are greatly influenced by the industrial life cycle. The industrial life cycle is closely related to the historical sequencing and diffusion of technology. The complex mixture of statist-market-Schumpeterian structuralist perspectives could lead more technologically advanced society in South Korea.

• International Commerce and Information Review
• /
• v.11 no.4
• /
• pp.313-344
• /
• 2009

Corporate Social Responsibility(CSR) is considered recently a key factor for the firm's success and sustainable growth in today's changing business environments. Discussions on CSR are extensively unfolding in various sectors, public, civil society and business organizations, across the world. Consumer in foreign markets have been insisted that multinational corporations and foreign supplier need to adapt their business activities to not only the economic, but also social needs of the consumer. Therefore Korean companies operating in global markets need their global CSR strategy, which will contribute to the improvement of their international competitiveness and long term growth. Thus, the purpose of this study is to report on the strategy of corporate social responsibility through the literature review and illustration of CSR activities of the leading companies in global market. In addition, this paper is aimed to provide Korean firms the insight in reinforcement of global competitiveness in relation of strategic CSR.