• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.622-624
• /
• 2015

As uncertain factors are latent in a construction project by nature, a change order occurs frequently. The occurrence of change orders in construction projects conducted during construction phase is known to cause unexpected negative impacts such as cost overrun, schedule delay, quality problem, and claims in the post-process. Thus, an efficient management method is necessary to prevent and minimize change orders during construction phase when they occur frequently. This paper analyzed the causes of change orders and the impact factors that occur during the construction phase of a construction project and suggested a direction for change order database building.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.365-366
• /
• 2023

The purpose of this study is to prevent dispute due to change orders in construction projects and to handle change orders smoothly. For this purpose, this study analyzed arbitration cases caused by change order handled by the Korea Commercial Arbitration Board. Based on this, dispute factors were analyzed and change order management factors and management plans were presented. Change order management factors were derived from responsibility, contract, design, process, construction cost, and schedule management, and a detailed management plan according to the relevant factor was presented.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.188-195
• /
• 2022

Although issuing change orders is a common practice in the construction phase of any project, non-structural utility subcontractors are struggling and seek to find a way to reduce change orders. Therefore, this paper presents the analysis results on change orders to cultivate possible suggestions and solutions on how to reduce or minimize change orders in mechanical, electrical, and plumbing (MEP) works. Change orders in non-structural utility works are analyzed based on six categories such as rerouting and change of location, changes in weight, rejected design by Office of Statewide Health Planning and Development, District Structural Engineer, or the Structural Engineer of Record, unforeseen conditions, changed equipment, and owner-initiated change. The analysis findings showed that rerouting and changing location is the most significant cause, followed by unforeseen conditions. The results not only contribute to the existing body of knowledge on change order research area, but also help MEP contractors reduce the time and cost of change orders.

• 문화기술의 융합
• /
• 제7권4호
• /
• pp.879-892
• /
• 2021

수주생산 환경에서 제조업체의 견적정보는 다양한 고객요구에 대응하여, 프로젝트의 입찰, 수주, 그리고 생산할 제품의 기초정보로 사용하는 중요한 정보이다. 이 견적정보는 고객요구, 제품생산 환경의 변화, 기술제휴사의 도면정보 변경, 그리고 제품의 기술 개선 등의 여러 요인에 의해 변경된다. 이러한 변경으로 인하여, 제조사가 고객의 요구사항을 반영하여 작성중인 견적정보에 다양한 변경이 발생한다. 이러한 다양한 변경요인에 따른 견적정보의 변경은 수주생산 기업의 입장에서 견적관리업무에 많은 부담을 주고 있다. 특히, 견적의 변경요인으로 인한 견적정보 변경은 고객중심의 주문생산 환경에서 고객의 요구사항에 의해 불가피하고 빈번하게 발생한다. 본 논문에서는 견적생성 프로세스를 기준으로 견적변경 프로세스를 제시하고, 일관적이고 효율적인 견적변경처리 방안을 제시하고자 한다. 이를 위하여, 견적의 변경이 발생하는 요인을 정의하고, 각 요인에 대한 변경유형을 정의하였다. 그리고 견적변경에 대한 발생 요인별 사례를 통하여 견적변경 프로세스가 견적관리시스템에 적용되는 과정을 보여준다. 또한 제안된 견적변경 요인, 견적변경 유형, 견적변경 프로세스, 그리고 견적체계 관리의 유용성을 보여주기 위하여, 고객 중심의 수주생산기업인 'H'사의 선박엔진 부문의 통합 견적관리시스템에서의 견적변경처리 기능 및 절차에 적용하였다. 그 결과, 견적변경 요인에 따른 견적변경 처리 및 관리가 효율적으로 수행됨을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.155-158
• /
• 2009

During the construction project period, a lot of change orders happen in the design and construction stage Especially, The change order during construction stage causes the huge construction cost increase and duration delay. Accordingly, research on the change order of the construction stage is being progressed relatively active in the design stage, but the design changes are rarely made. In the design stage, the owner has to pay a design addition cost when change order due to the demands of owner happens. However Korea has not the specific standard about design additional cost in design stage. Therefore, this study analyzes problems of design additional cost estimation methods through the case study, and then indicates the method that the ratio distributes to details dividing design tasks and the method of the PM(Project Management). Eventually, this study expects to minimize claim related the design additional cost in design stage.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.371-375
• /
• 2015

Design-Build (DB) has gained in popularity in roadway projects due to its defining advantage to improve communication and fast-track project delivery. However, very little is known about the impact of change order frequency and occurrence timing pertaining to DB projects. The study analyzes their impacts on project time and cost performance by conducting a rigorous numerical analysis drawing on 530 3R (rehabilitation, reconstruction, and resurfacing) projects completed between 2002 and 2011 in Florida by using a multiple linear regression. The results indicate that DB outperformed Design-Bid-Build in project cost as well as time. Critically, the regression analysis signifies that earlier change order occurrence caused more unfavorable impacts on schedule and cost. The proposed analyses and models will lead to the improved ability of agencies to quickly and more reliably estimate the potential change order impacts on schedule and cost.

• 대한인간공학회지
• /
• 제30권6호
• /
• pp.757-764
• /
• 2011

Objective: The aim of this study was to provide a method to improve the compliance and reduce the time by reducing the workload during the model change work. Background: The enterprises are constructing the small quantity batch production system by increasing the number of model change and reducing model-changing. However, the compliance is low because the work is strenuous and high skills are needed, so the system management is facing with many difficulties. Method: After classifying the model change work according to the purposes(preparation, change and adjustment) with the target of mascara filling machine, element tasks time were measured and the motion analysis(therblig symbol) and REBA analysis were performed. The study incorporated 3 independent variables as the number of motion, REBA score and the element time. The dependent variable is the type of element work as preparation, change and adjustment. The statistical test was performed by one-way ANOVA(${\alpha}$ < 0.05). Results: For the preparation, the number of motions appeared in the order of Use(U), Transport Loaded(TL), and Position(P). The order appeared in change is Use(U), Release Load(RL), and Grasp (G). The adjustment appeared in the order of Position(P) and Use(U). The results of average motion time as the element work times divided by the number of motion appeared in the order of adjustment(1.85sec/motion), preparation(1.11sec/motion), and change(0.62sec/motion). The results of REBA showed that the average risk level of change and adjustment were medium, but 53.1% of change and 42.9% of adjustment were evaluated as high. Conclusion: Reducing the avoidance and improving the compliance of work could be expected if the job autonomy were improved by improving the working postures with high risk level. Application: It is expected to solve the problem of reducing the time of model change work in the small quantity batch production system. The future work is to carry out the improvement directions found in the results and compare the results after improvement.

• 한국의류산업학회지
• /
• 제13권4호
• /
• pp.523-530
• /
• 2011

This study aims to make a comparison between variables influencing female college students' body shame and appearance change intention in individualist culture(Germany) and collectivist culture(Korea, China), that which variable among individual's physical character(BMI), psychological character(public self-image), and sociocultural pressure has the biggest influence in each culture. The findings of the research are as follows. 1. The German group of female college students had the highest BMI, and there were no difference between Korean and Chinese group. Public self-consciousness, sociocultural pressure, ideal appearance attitude, body shame, and appearance change intention were highest in Korea and lowest in Germany. 2. The variables that affected body shame were powerful in the order of sociocultural pressure, appearance internalization, BMI, and appearance awareness in the Korean group of female college students. In the Chinese group, the order was sociocultural pressure, appearance internalization, and public self-consciousness. On the contrary, in the German group the order was appearance internalization, appearance awareness, sociocultural pressure, and public self-consciousness. 3. The variables that affected appearance change intention were powerful in the order of sociocultural pressure, body shame, and appearance awareness in the Korean group of female college students. In the Chinese group, the order was sociocultural pressure, body shame, and appearance awareness, and in the German group, the order was appearance internalization, body shame, and BMI.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.129-130
• /
• 2012

Although the order of Design-Build is being expanded by increasing construction scale and demanding hybrid function, the suitable regulation of the contracts is not settled. Design-Build is way by government because there are big construction of much government leading in contract relation high position occupy. So, case that prebendary's claim institution develops by litigation is very rare. But, recently Design-Build is magnified. So, these dispute factors is becoming visualization gradually. The contract system is needed to be consistent by international standard to deal with the problem. This study suggests the useful solutions in detail concerned with the main factor of change order claim by each Design-Build phases through practical sorting and analysis of the causes of Change Order-Claim.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 추계학술대회
• /
• pp.129-142
• /
• 2003

The SCM is that Supply Chain Network is Promptly and Voluntarily Optimized in Unstable Market Change Environment. The Cash flow Efficiency of Hole Supply Chain Network is Improved by Changing the Information and Changing the Foundation of Business Processes. The Role of WMS has been Changing Importantly with the Introduction of SCM. WMS Needed to Change to the Information Center in Order to Change Information in Real Time and the WMS of Information Storing in Order to Support an Idea Decision. This Development was Defined about the Importance of WMS in SCM Environment. The Criterion of Valuation is Normally Measured Time between Taking a Order Receive and Bringing the Items to Customer. The Decreasing Move Time of Order Picker in Warehouse is Directly Influence to the Job Execution. So, this Research is Defined about the Optimized Route of Order Picker and Suggests Algorithm. To do this, Past Algorithm is Studied. It's Easy to Introduce and this Study is Looking for Method about the Noticing of Order Picker. The Algorithm will Improve to be Adapt to Standard Process System.