• 한국산업융합학회 논문집
• /
• 제20권2호
• /
• pp.97-104
• /
• 2017

In the present industrial field, the demand for the development of the solar power source device and the charging device for the solar cell is gradually increasing. The solar charger is largely divided into a DC-DC converter that converts the voltage generated from the sunlight to a charging voltage, and a battery and a charger that are charged with an actual battery. The conventional charger topology is used either as a Buck converter or a Boost converter alone, which has the disadvantage that the battery can not always be charged to the desired maximum power as input and output conditions change. Although studies using a topology capable of boosting and stepping have been carried out, Buck-Boost converters or Sepic converters with relatively low efficiency have been used. In this paper, we propose a new Buck Boost combination power converter topology structure that can use Buck converter and Boost converter at the same time to improve inductor current ripple and power converter efficiency caused by wide voltage control range like solar charger.

• 한국전산유체공학회지
• /
• 제18권4호
• /
• pp.17-24
• /
• 2013

In this study, we consider the characteristics of channel flow in the presence of an infinite streamwise array of equispaced identical rotating circular cylinders. This flow configuration can be regarded as a model representing a micro channel or an internal heat exchanger with cylindrical vortex generators. A numerical parametric study has been carried out by varying Reynolds number based on the bulk mean velocity and the cylinder diameter, and the gap between the cylinders and the channel wall for some selected angular speeds. An immersed boundary method was employed to facilitate implementing the cylinders on a Cartesian grid system. No-slip condition is employed at all solid boundaries including the cylinders, and the flow is assumed to be periodic in the streamwise direction. The presence of the rotating circular cylinders arranged periodically in the streamwise direction causes a significant topological change of the flow, leading to increase of mean friction on the channel walls. More quantitative results as well as qualitative physical explanations are presented to justify the effectiveness of rotating cylinders to modify flow topology, which might be used to enhance heat transfer on the channel walls.

• 한국정보처리학회논문지
• /
• 제1권2호
• /
• pp.184-193
• /
• 1994

본 논문은 최소목(Minimum-weight Spanning Tree, MST)에 있어서 네트워크의 랭크 중 몇개가 삭제(또는 파괴) 또는 추가(또는 회복) 되었을 때, MST를 재구성하는 분산 알고리즘을 제안한다. 본 논문에서 제안한 알고리즘의 메세지 복잡도는 Ο(m＋n log(t＋f))이고, 이상시간 복잡도는 Ο(n＋n log(t＋f))가 되며, 여기서 n은 네트워크의 프로세서의 수이고 t(resp. f)는 추가되는 링크의 수(resp. 이전 MST의 삭제된 링크의 수)이다. 그래서 네트워크의 형태가 변형이 된 다음에 f=O이고 m=e일 경우에는 m=t＋n이 된다. 또한 본 논문의 마지막 부분에서는 링크의추가, 삭제와 마찬가지로 프로세서의 추가, 삭제되었을 경우의 알고리즘도 제안한다.

• 한국전산구조공학회논문집
• /
• 제25권5호
• /
• pp.439-446
• /
• 2012

본 논문은 1차원 자유경계문제 해석의 정확도 향상을 위해 이동최소제곱 차분법을 이용하여 이동경계의 위상변화를 implicit하게 추적하는 기법을 제시한다. 기존의 이동최소제곱 차분법은 이동경계의 위치를 explicit하게 진전시켜 반복계산은 필요없지만 해의 정확도 감소를 피할 수 없었다. 그러나 본 연구에서 제시한 implicit 기법은 전체 계방정식이 비선형 시스템이 되어 반복계산 과정이 필요하지만, 실제로 수치예제를 통해 검증해 본 결과 계산량의 큰 증가없이 해석의 정확도를 획기적으로 향상시켰다. 이동하는 미분불연속 특이성을 갖는 융해(melting)문제를 수치계산한 결과, implicit 이동최소제곱 차분법을 통해 2차정확도를 얻을 수 있음을 보였다.

• Spatial Information Research
• /
• 제17권2호
• /
• pp.183-189
• /
• 2009

지형 지물의 생성, 소멸, 변경으로 인한 수치지형도의 변경은 정보의 변경으로 표현할 수 있는데 사회가 복잡해짐에 따라 수치지형도 상의 지형 지물의 복잡도가 커지고 다른 객체와의 관계도 복잡해지고 있다. 정확성과 최신성을 유지하면서 수치지형도에 효율적으로 반영하기 위해서 준공도면을 이용한 부분갱신을 수행하는데 이는 현장측량을 수행하지 않는 부분갱신의 단점을 보완할 수 있으나 정보가 포함된 파일 혹은 데이터베이스 전체가 생성 혹은 소멸될 경우와 달리 객체별로 변경이 될 경우 원천자료의 상이, 갱신일자의 상이 등 부가적인 문제가 발생하므로 공간정보 속성정보의 생성, 변동, 소멸에 대한 이력 항목을 선정하고 관리하는 것이 필요하다. 본 연구에서는 준공도면을 활용한 수치지형도 갱신시스템의 업무를 분석하고 필요한 이력항목을 제시하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.263-269
• /
• 2018

In this study, a selective inverter operation between a 2-level voltage source converter (VSC) and a 3-level T-type VSC (3LT VSC) is proposed to improve the efficiency of a 3LT VSC. The 3LT VSC topology, except for its neutral-point switches, has similar operations as that of the 2-level VSC. If an operation mode is changed according to efficiency, the efficiency can be improved because efficiencies of each methods are depending on current and MI (Modulation Index). The proposed method calculates the power losses of the two topologies and operates as the having lower losses. To calculate the losses, the switching and conduction losses based on the operation mode of each topology were analyzed. The controller determined the operation mode of the 2- or 3-level VSC based on the power loss calculated during every cycle. The validity of the proposed control scheme was investigated through simulation and experiments. The waveform and average efficiency of each method were compared.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2003년도 추계학술대회 및 정기총회
• /
• pp.113-117
• /
• 2003

Studies of Internet algorithms or policies require experiments on the real large-scalenetworks. But practical problems with large real networks make them difficult Instead many researchers use simulations on the Internet topology models. Some tried to find out abstract topological properties of Internet. And several models are proposed to reflect Internet's topological characteristics better. But few studies have been performed on how to model the evolution of Internet. We propose algorithms for modeling addition and removal of nodes and accompanied change of topologies. We analyze the topologies generated by our algorithms to observe that they obey power-laws better than those generated by existing ones. These algorithms are also expected to be helpful in predicting future topologies of Internet.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.953-965
• /
• 2023

The stratospheric drones are developed to perform missions such as weather observation, communication relay, surveillance, and reconnaissance at 18km to 20km, where climate change is minimal and there is no worry about a collision with aircraft. It uses solar panels for daytime flights and energy stored in batteries for night flights, providing many advantages over existing satellites. The electrical and power systems essential for stratospheric drone flight must ensure reliability, efficiency, and lightness by selecting the optimal circuit topology. Therefore, it is necessary to analyze the circuit topology of various types of multi-level inverters with high redundancy that can ensure the reliability and efficiency of the motor driving power required for stable long-term flight of stratospheric drones. By quantifying the switch element voltage drop and the number and weight of inverter components for each topology, we evaluate efficiency and lightness and propose the most suitable circuit topology for stratospheric drones.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.806-807
• /
• 2011

This paper presents a new sensorless controller used with both the classical sliding mode observer(SMO) and the rate of current change in order to a reduced torque ripple for switched reluctance motor (SRM) sensorless drives. The new sensorless scheme consists of a sliding mode observer (SMO)-based position sensorless approach for high speeds along with a low-resolution discrete the rate of current change for low speeds and standstill. The new position estimation resets between the SMO and the low-resolution of current change according to the speed sign and the position error difference between the SMO and the low-resolution rate of current change. The simulation results show the robustness of this new high performance sensorless control approach with the hybrid sensorless control topology.

• 대한전자공학회논문지TC
• /
• 제46권2호
• /
• pp.97-103
• /
• 2009

최근 802.11 무선 네트워크에서 TCP성능 향상을 위한 많은 연구가 이루어지고 있다. End-to-end 연결에서 TCP성능을 결정하는 가장 큰 요인으로는 hop-count와 RTT (Round Trip Time) 이다. 본 논문에서는 TCP의 성능을 향상하기 위해, hop-count와 RTT 변경 시 적절한 CWND값을 설정하여 TCP-CEV을 변경하는 기법을 설명한다. 본 논문에서 제안한 기법은 기본 TCP 구조를 따르는 대부분의 transport 프로토콜에 적합하고, 분석적인 과정을 통해 결과를 도출한다. 시뮬레이션을 통해 제안한 기법이 체인 토폴로지에서 12%, 격자 토폴로지에서 4.9% 이상 성능이 향상되었으며, TCP window가 특정 값에 수렴하는 것을 보인다.