• Nuclear Engineering and Technology
• /
• 제26권4호
• /
• pp.471-483
• /
• 1994

시험용기가 1.7㎥가 되는 소규모 나트륨화재 실험 시설을 건설하여 나트륨 관련시설에서 발생가능한 풀형화재, 분무형화재, 그리고 원주형화재와 같은 나트륨화재 실험을 실시하였다. 그 결과 풀형화재는 나트륨 주입량에 비하여 온도 및 압력 증가치가 분무형화재와 원주형화재보다 훨씬 작지만 상당기간 나트륨풀과 용기안의 온도를 높게 유지시키며 나트륨 주입량이 많을 경우 용기내의 산소를 거의 소모시켜 용기안의 산소농도를 0mol%에 근접시키고 진공 상태까지 이르게 하였다. 분무형화재는 분산된 작은 나트륨이 순간적으로 산소와 반응하여 급격히 용기내의 온도와 압력을 증가시키며 곧 감소하였다. 분무형 화재의 최고 도달온도와 압력은 초기 산소농도 그리고 나트륨 주입온도에 따라 크게 다름을 보여 주었다. 원주형화재는 분무형화재와 거의 유사하지만 좀 더 많은 양의 나트륨을 시험용기내에 주입시켜도 최고 도달 온도와 압력이 분무형보다 작았다. 그리고 분무형화재와 원주형화재에서는 풀형화재에 비하여 순간적으로 분산된 나트륨이 산화하여 용기내의 측정위치에 따라 온도분포가 크게 다름을 보여주었다. 끝으로, 풀형화재 소화실험에서는 소화제 graphex가 효과적으로 나트륨 화재를 진화시킬 수 있음을 확인하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.142-147
• /
• 2009

COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and has been developing by KARI for communication, ocean and meteorological observations. It will be tested under vacuum condition and very low temperature in order to verify thermal design of COMS. The test will be performed by using KARI large thermal vacuum chamber, which was developed by KARI, and the COMS will be the first flight satellite tested in this chamber. The purposes of thermal balance test are to correlate analytical model used for design evaluation and predicting temperatures, and to verify and adjust thermal control concept. KARI has plan to use heating plates to simulate space hot condition especially for radiator panels such as north and south panels. They will be controlled from 90K to 273K by circulating GN2 and LN2 alternatively according to the test phases, while the shroud of the vacuum chamber will be under constant temperature, 90K, during all thermal balance test. This paper presents thermal modelling including test chamber, heating plates and the satellite without solar array wing and Ka-band reflectors and discusses temperature prediction during thermal balance test.

• 대한한방부인과학회지
• /
• 제29권2호
• /
• pp.83-98
• /
• 2016

Objectives: This Study was designed to investigate the effect of Oxygen chamber to recover muscle fatigue. Methods: Twenty Subjects were divided into Oxygen Chamber Group (n=10) and Rest group (n=10). Subjects visited hospital two times, blood tests were performed 3 times for each visit. 1st blood test was performed in 4 hours hunger state. 2nd blood test was performed within 5 minutes after the 6 minutes bike exercise. 3rd blood test was performed after the 40 minutes Oxygen treatment or 40 minutes rest in bed. Blood test items were Lactate, Glucose, Lactate Dehydrogenase, Creatine Kinase, Free Fatty Acid. 2nd visit was applied 1st visit process, But Oxygen Chamber group was crossed over to Rest Group, Rest Group was crossed over to Oxygen Chamber group. The Blood test result was analyzed with paired T-test using SPSS for Windows version 21. Results: The reduction of Lactate in Oxygen Chamber Group (6.86±2.07 mmol/ℓ) was higher than Rest group (6.57±2.33 mmol/ℓ), but it was not statically significant (p=0.68). The reduction of Glucose in Oxygen Chamber Group (6.85±12.14 mg/dl) was lower than Rest group (7.60±9.83 mg/dl), but it was not statically significant (p=0.83). The reduction of Lactate Dehydrogenase in Oxygen Chamber Group (16.10±14.91 mmol/ℓ) was lower than Rest group (19.75±12.46 mg/dl), but it was not statically significant (p=0.41). The reduction of Creatine Kinase in Oxygen Chamber Group (13.40±5.69 U/ℓ) was lower than Rest group (15.25±8.01 U/ℓ), but it was not statically significant (p=0.41). The reduction of Free Fatty Acid in Oxygen Chamber Group (285.50±174.13 uEq/ℓ) was higher than Rest group (196.15±131.58 uEq/ℓ), but it was not statically significant (p=0.07). Conclusions: This study showed Oxygen chamber therapy could be effective to recover muscle fatigue.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권4호
• /
• pp.356-363
• /
• 2016

Purpose: The purpose of this study is to propose efficiency of equipment testing the luminance degradation of OLED. Methods: The degradation model of Exponential model and Stretched exponential model is analyzed by goodness of fit test using calculated R-square. The degradation model having the higher R-square is finally selected. Scale parameter and Shape parameter using the selected degradation model is estimated. The activation energy and current density n using peck model among the accelerated model is estimated. the estimated parameters are analyzed by t-test. Results: The results of t-test show that the estimated parameters on chamber and hotplate are equal statistically. we can know the similarity of the luminance degradation rate and degradation pattern on chamber and hotplate. Conclusion: The result of the degradation test on chamber and hotplate is similar. when the accelerated degradation test on the panel of the OLED TV is performed, hotplate is requiring less samples, time and cost than chamber. so the accelerated degradation test on the panel of the OLED TV using the hoplate is efficient of time and cost.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1066-1074
• /
• 2004

A vibration isolation system for a large reverberation chamber (1,228 $m^3$ and 1,000 ton) has been installed and verified. The reverberation chamber generates loud noise and induces high level of vibration while performing spacecraft acoustic reliability tests. The isolation system prevents vibration transfer from the chamber to the enclosure buildings. This paper describes design process and commissioning experiments of the system. Design criteria have been derived from rigid body model of the chamber. The stiffness of neoprene pads has been selected by employing finite element analysis of the reverberant chamber and isolation system. A total of 21 neoprene pads have been installed between the chamber and supporting Pedestals. A sand bag of 800kg was dropped on the chamber floor to measure the natural frequency of the isolation system. While 136.9 dB noise is generated in the chamber, absolute transmissibility of the isolation system has been measured. The measured natural frequency of the chamber is 10.2Hz, which is 80% of the predicted value. Overall transmissibility at working frequency range (25∼10.000 Hz) is less than -12.4 dB.

• 설비공학논문집
• /
• 제28권2호
• /
• pp.81-88
• /
• 2016

There are many types of national and international standards for low temperature tests depending on the products. This study conducted CFD analysis and estimation of the energy efficiency of the chamber both with and without a test object by considering variations of COP and specific volume according to temperature. The supply air was located in the upper area to compare the cooling performance for each location using various outlets in mixed ventilated conditions. For cases without the test object, the air temperature of the upper supply and center extract on the opposite side type chamber cooled faster than other areas by 4.3~29.8%. However, for cases with the test object, the object temperature of the upper supply and lower extract type chamber cooled faster than the other areas by 7.2~31.5%. The cooling efficiency of the air inside the chamber and the test object did not show the same pattern, which indicates the need to consider the cooling performance by not only the air but also the test object in the cryogenic chamber design for testing.

• 한국콘텐츠학회논문지
• /
• 제15권12호
• /
• pp.1-7
• /
• 2015

현재까지 개발된 항재밍 위성항법장치는 주로 대형 무반향 챔버 및 필드시험을 통하여 검증하였다. 대형 무반향 챔버를 이용할 경우 노이즈 등 외부환경에 독립적으로 장비를 검증할 수 있는 장점이 있지만 높은 비용과 챔버 시설 가용 문제 등의 단점이 있다. 그리고 필드시험의 경우 실제 재밍환경과 유사하게 시험할 수 있는 장점이 있지만 군용장비의 경우 보안 문제 및 항상 동일한 조건으로 시험을 할 수 없는 단점이 있다. 본 논문에서는 기존 점검 시스템의 단점을 극복할 수 있는 새로운 항재밍 위성항법장치 점검 시스템을 제안하였다. 제안하는 점검시스템은 크게 소형 챔버, 재밍 분배기, 재밍신호 발생기, 위성 모의기로 구성된다. 소형 챔버에는 다수 재밍을 모의하기 위해 다수의 안테나를 내부에 설치하였고, 다수의 재밍 신호를 제어하기 위한 재밍 분배기를 새롭게 설계하였다. 점검 시스템의 자체 성능 시험과 항재밍 위성항법장치와의 연동 시험을 통해 제안한 점검 시스템의 신뢰성을 확인하였다.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1652-1657
• /
• 2010

This paper analyzes optimal stirrer parameter to improve field uniformity in a mode-stirred reverberation chamber. Stirrer parameter is varied about stirrer height and stirrer angle. Also we analyze quality factor, number of excited modes and stirrer efficiency that affect field uniformity. The results show good performance as higher as stirrer height. Isotropic field distribution is formed at $45^{\circ}$ stirrer angle. When stirrer angle varies, scattering characteristic of incident wave are changed. So electric field distribution in a mode-stirred reverberation chamber is also changed. Therefore, it affect field uniformity. The results expect to help that designs stirrer for get better field uniformity. Immunity test performed designed mode-stirred reverberation chamber for semiconductor that categorized by technology. Test result shows that good recurrence compared wave-guide immunity test.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.168-175
• /
• 2007

Ash melting chamber is one of the key facility of the pyrolysis-melting incineration system, and it should be designed and operated very carefully for avoiding solidification of slag. In this study, an example of numerical and experimental scale-up process of the melting chamber, in which high speed air is injected to the molten slag and generates bubbles, which enhances agitation of the slag and char combustion, is presented. Cold flow test, combustion and melting test in a lab-scale (30 kg/hr) chamber and a pilot scale (200 kg/hr) chamber. Minimum energy for maintaining molten slag is derived, and it was found that the molten slag can be maintained efficiently by concentrating heat into the bubbling slag.

• Journal of electromagnetic engineering and science
• /
• 제1권2호
• /
• pp.126-130
• /
• 2001

The performance of a fully anechoic chamber (FAC) for radiated emission (RE) measurements has been evaluated using the normalized site attenuation (NSA). To do this, the antenna factor (AF) of a set consisting of nearly identical antennas has been calibrated at an open area test site (OATS). Appropriate correlation factor (CF) between the chamber and the OATS has been calculated. Results show that the performance of the chamber is fairly good with respect to the ANSI-limit except 41~66 MHz far vertical polarization and near 900 MHz for horizontal polarization.