불포화 비닐 유도체의 다양한 반응성은 자유 라디칼의 사슬 중합반응을 거쳐 유도되어질 수 있으며, 열역학적으로 실행 가능한 고분자 중합을 수행할 수 있는 능력은 주어진 반응조건 항서 반응을 진행시킬 수 있는 적당한 속도에 의존한다. 따라서 반응이 일어날 수 있는 속도조건을 만들기 위해 중합 개시제와 촉진제가 주로 사용되고 있다. 빛의 흡수도는 Methyl Methacrylate(MMA)를 포함한 단지 몇 종류의 불포화 비닐 단량체들만이 가장 편리한 250nm~500nm 파장범위의 빛을 흡수할 수 있다고 알려져 있다. 또한 광학적, 전기적으로 독특한 성질을 가진 polysilanes은 세라믹의 전구물질, UV 광전저항, 광전도체 등으로 널리 사용되어 왔으며, hydrosilation 반응은 실리콘을 포함한 여러 가지 흥미로운 고분자를 만드는데 사용되고 있다 본 연구는 콘텍트렌즈 재료로 사용되는 고분자를 광 화학적 개시제의 작용을 통하여 공중합체와 단일 중합체로 합성하여 그 수율을 분석하였다. 그 결과 이러한 개시제들은 비닐 유도체들의 중하반응에서 경쟁적으로 또는 동시에 사슬 개시와 사슬 전이제로서 작용하고 있음을 보여 주었다.
폴리스티렌의 취약한 성질을 개선한 내충격정 폴리스티렌 (HIPS)의 내충격성에 영향을 주는 요소는 분산된 고무상 입자의 크기 및 입도분포, 분자량, 형태구조, 그래프트율 등이다. 이에 따라 HIPS의 물성은 영향을 받으므로 이를 조절하거나 파악하는 것은 중요하다. 본 연구에서는 HIPS의 벌크-용액중합에서 용매함량이 고무입자의 형태구조 및 입도분포, 최종 물성에 미치는 영향에 대하여 고찰하였다. 먼저 중합 진행에 따른 분산상의 입도분포를 측정함으로써 상역전 현상의 변화 추이를 파악하여 전중합 시간을 결정하였다. 중합시 분산용매는 적절한 양에 도달하기 전까지는 고무입자의 크기가 증가하였으며, 그 후에는 점차적으로 감소하였다. 고무상의 형태구조는 분산용매가 증가함에 따라서 그래프트율이 증가하는 형태구조로 바뀌는 것으로 사료된다. 분산용매가 첨가됨에 따라 유변물성 및 인장물성이 취약해졌는데, 이는 분산용매에 의한 사슬이동반응이 매트릭스상인 폴리스티렌의 분자량을 감소시킨 점과 잔류 용매의 존재 때문이었다. 하지만 내충격성은 분산입자의 크기가 증가한 경우 향상되는 경향을 보였다.
The structural changes occurring in the isothermal crystallization processes of polyethylene (PE), poly-oxymethylene (POM), and vinylidene fluoridetrifluoroethylene (VDFTrFE) copolymer have been reviewed on the basis of our recent experimental data collected by the time-resolved measurements of synchrotron-sourced wide-angle (WAXS) and small-angle X-ray scatterings (SAXS) and infrared spectra. The temperature jump from the melt to a crystallization temperature could be measured at a cooling rate of 600-1,000 $^{\circ}C$/min, during which we collected the WAXS, SAXS, and infrared spectral data successfully at time intervals of ca. 10 sec. In the case of PE, the infrared spectral data clarified the generation of chain segments of partially disordered trans conformations immediately after the jump. These segments then became transformed into more-regular all-trans-zigzag forms, followed by the formation of an orthorhombic crystal lattice. At this stage, the generation of a stacked lamella structure having an 800-${\AA}$-long period was detected in the SAXS data. This structure was found to transfer successively to a more densely packed lamella structure having a 400-${\AA}$-long period as a result of the secondary crystallization of the amorphous region in-between the original lamellae. As for POM, the formation process of a stacked lamella structure was essentially the same as that mentioned above for PE, as evidenced from the analysis of SAXS and WAXS data. The observation of morphology-sensitive infrared bands revealed the evolution of fully extended helical chains after the generation of lamella having folded chain structures. We speculate that these extended chains exist as taut tie chains passing continuously through the neighboring lamellae. In the isothermal crystallization of VDFTrFE copolymer from the melt, a paraelectric high-temperature phase was detected at first and then it transferred into the ferroelectric low-temperature phase at a later stage. By analyzing the reflection profile of the WAXS data, the structural ordering in the high-temperature phase and the ferroelectric phase transition to the low-temperature phase of the multi-domain structure were traced successfully.
아세트산비닐(VAc)을 아조비스디메틸발레로니트릴(ADMVN) 및 삼차부틸알코올 (TBA)을 각각 개시제 및 용매로 하여 30, 40 및 5$0^{\circ}C$에서 용액중합하였다. 합성된 폴리아세트산비닐 (PVAc)을 비누화함으로써 고분자량 혼성배열 폴리비닐알코올(PVA)을 제조하였다. 중합조건들이 전환률, 가지화도 및 PVAc와 PVA의 분자량에 미치는 영향을 고찰하였다. TBA에서의 VAc의 중합 속도는 ADMVN 농도의 0.49승에 비례하였고, 이는 이론치 0.5와 잘 일치하였다. 저온에서 개시가 가능한 ADMVN 및 낮은 사슬이동상수를 갖는 TBA를 사용함으로써 고분자량 및 고수율의 PVA가 얻어졌다. PVAc의 평균 중합도는 전환률 약 35%부터 70%의 범위에서 10000~13000이었고, 이를 비누화하여 얻은 PVA의 평균 중합도는 2400~6100이었다. 교대배열 다이애드기 함량은 중합온도를 낮춤에 따라 조금씩 증가하였고, 중합시 TBA의 입체장애 효과 때문에 TBA의 양을 증가시킴에 따라서도 증가하였다.
It has been shown that ion implantation produces remarkable improvements in surface-sensitive physical and chemical properties as well as other mechanical properties, in polymers. In this study, ion implantation was performed onto polymer, PC(polycarbonate), in order to investigate surface hydrophilic property through contact angle measurement using distilled water. PC was irradiated with N, Ar, Xe ions at the irradiation energy of $20\;{\sim}\;50keV$ and the dose range of $5{\times}10^{15},\;1{\times}10^{16},\;7{\times}10^{16}\;ions/cm^2$. The contact angle of water has been reduced with increasing fluence and ion mass but increased with increasing implanted energy. The changes of chemical and structural property are discussed in view of infrared spectroscopy and FT-IR, XPS, which shows increasing C-O bonding and C-C bonding. The root mean square of surface roughness examined by means of AFM changed smoothly from 0.387nm to 0.207nm and the change of wettability was discussed with respect to elastic and inelastic collisions obtained as results of TRIM simulation. It was found that wettability of the modified PC surface was affected on change of functional group and nuclear stopping or linear energy transfer(LET, energy deposited per unit track length per ion) that causes chain scission by displacing atom from polymer chains, but was not greatly dependant on surface morphology.
Xu, Fei;Kim, Hee Un;Mi, Dongbo;Lim, Jong Min;Hwang, Ju Hyun;Cho, Nam Sung;Lee, Jeong-Ik;Hwang, Do-Hoon
Bulletin of the Korean Chemical Society
/
제34권2호
/
pp.399-405
/
2013
Two series of new green phosphorescent polymers bearing a bis(2-phenyl-pyridine)iridium(III)(dibenzoylmethane) [$(ppy)_2Irdbm$] complex were designed and synthesized. Poly-carbazole (PCbz) derivative or polyfluorene with pendant carbazole groups (PFCbz) were employed as host polymers for the iridium complex. The iridium complex monomer was copolymerized with the host monomers using varying monomer ratios via a Yamamoto coupling reaction. Efficient energy transfer from host to dopant unit was observed by increasing the ratio of the iridium guest in the copolymers. Electroluminescent devices with the configuration ITO/PEDOT:PSS/polymer/BmPyPB/LiF/Al were fabricated and characterized. The phosphorescent polymers composed of the iridium complex guest and polyfluorene with carbazole pendants as a host performed better than the polymers composed of the same guest and the main chain polycarbazole host. A maximum external quantum efficiency of 0.73%, a luminous efficiency of 1.21 cd/A, and a maximum luminance of 372 $cd/m^2$ were obtained from a device fabricated using one of the synthesized copolymers.
열응답성 고분자인 폴리(N-이소프로필아크릴아미드) (PNIPAAm) 말단에 아민기를 갖는 PNIPAAm-$NH_2$ 및 이들 알긴산 나트륨에 그래프팅시킨 공중합체를 합성하고 이들의 여러 가지 특성들을 분석하였다. PNIPAAm-$NH_2$를 합성하기 위하여 N-이소프로필아크릴아미드를 라디칼 중합할 때 2-aminoethanethiol hydrochloride (AESH)를 연쇄이동제로 사용하였다. AESH 농도를 높이면 PNIPAAm-NH2의 분자량이 작아지며 PNIPAAm-$NH_2$ 수용액의 하한임계용액온도(LCST)가 낮아졌다. N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide 및 N-hydroxysuccinimide를 사용하여 PNIPAAm-$NH_2$를 graft-onto 방법으로 알긴산 나트륨에 그래프팅시킨 alginate-g-PNIPAAm 공중합체 역시 온도에 따라 팽윤-수축 거동을 하였으며, PNIPAAm-$NH_2$보다 약간 높은 온도에서 LCST를 나타내었고, 그래프트된 PNIPAAm의 양이 많아질수록 팽윤비가 커졌다.
Arcella, V.;Colaianna, P.;Brinati, G.;Gordano, A.;Clarizia, G.;Tocci, E.;Drioli, E.
한국막학회:학술대회논문집
/
한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
/
pp.39-42
/
1999
Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.
악성 조직의 온열 치료는 성공적인 암 치료 방법의 하나로서 방사선 치료 및 화학 요법에 비해 생체 적합성이 우수하고 비교적 온화한 조건에서 사용할 수 있어 최근 큰 주목을 받고 있다. 본 연구에서는 온열 치료를 목적으로 생체 적합성 고분자인 poly(2-methacryloyloxyethyl phosphorylcholine/fluorescein O-methacrylate) (P(MPC/FOM))를 코팅한 초상자성 산화철 나노 입자 (IONP)를 제조하고 관련 특성을 분석하였다. 15 nm 직경을 갖는 IONP는 먼저 공침법에 의해 제조된 후, 4-cyanopentanoic acid dithiobenzoate (CTP) 을 사용하여 IONP의 표면을 개질하였으며, 이 후 MPC 및 FOM 단량체의 reversible addition-fragmentation chain transfer (RAFT) 공중합을 통해 P(MPC/FOM)의 코로나 층을 형성시켰다. 투과 전자 현미경 (TEM)과 동적 광 산란 (DLS) 분석을 통해 IONP@P(MPC/FOM)의 형태 및 수력학적 크기를 확인할 수 있었으며, 열 중량 분석 (TGA)을 통해 P(MPC/FOM) 코로나 층의 형성을 확인하였다. 또한 교류 자기장을 이용해 IONP 분산액을 노출시킨 결과, 0.2 중량 %의 IONP @ P(MPC / FOM) 수분산액이 온열 치료에 사용될 수 있음을 확인하였다.
본 연구에서는 poly(N-vinyl carbazole) (PVK), poly(4-vinylpyridine) (PVP), PVK-b-PVP 블록 공중합체를 RAFT 중합법으로 합성하였으며, 이를 이용하여 ethanol, N-methyl-2-pyrrolidone (NMP), dichloromethane (DCM), tetrahydrofuran (THF)와 같은 비 수계 용매에서 그래핀 분산액을 제조하였다. 합성된 고분자의 화학적 구조는 양성자 및 탄소 핵자기 공명 분광기($^1H-$, $^{13}C-NMR$), 크기 배제 크로마토그래피 (size exclusive chromatography, SEC), 시차 주사 열량계 (differential scanning calorimetry, DSC)를 이용하여 분석하였으며, 그래핀 분산액의 분산 안정성은 Turbiscan을 이용하여 시간에 따른 터비스캔 안정성 지수(Turbiscan stability index, TSI)를 측정, 정량적으로 평가하였다. 용매, 고분자, 그래핀의 표면장력(${\sigma}$), 용해도 상수(${\delta}$)를 이용하여 물질간의 상호작용에 대하여 설명하였으며, 이를 바탕으로 용매와 그래핀간의 용해도와 표면장력의 차이가 분산안정성에 큰 영향을 미침을 확인하였다. 그래핀의 분산 안정성이 좋지 못한 ethanol 및 THF 용매 하에서 PVK-b-PVP를 사용하여 그래핀을 분산시킬 경우 낮은 TSI값을 효과적으로 유지할 수 있었으며, 그래핀을 잘 분산시킨다고 알려진 NMP에 비하여 DCM이 더 좋은 그래핀 분산안정성을 보임을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.