• 물과 미래
• /
• 제29권6호
• /
• pp.155-166
• /
• 1996

개수로내의 검변 및 급변 부정류 해석을 위해서 dynamic wave식을 기본방정식으로 하고 이를 불연속 보간함수와 upstream weighting 을 도입한 Petrov-Galerkin 기법에 의해 해석하는 유한요소모형을 개발하였다. 매트릭스 안정성 해석 결과 Petrov-Galerkin기법은 단파장에서의 선택적 감쇠능력과 위상오차에 있어 우수한 것으로 나타났다. 반면에 Preissmann기법은 단파장에서의 선택적 감쇠능력과 위상오차에 있어 열등한 것으로 나타났고, Bubnov-Galerkin 기법은 비감쇠특성을 나타내고 있어 단파장 영역에서 발산해를 일으키는 주요원인임을 확인할 수 있었다. Petrov-Galerkin 방법은 Courant수의 넓은 범위에서 높은 주파수를 가진 진행파에 대한 선택적인 감쇠와 작은 Courant 수의 범위에서 양호한 위상정도를 가지는 이상적인 조합을 나타내고 있어 점변 및 급변 부정류 해석에 있어 이상적인 기법으로 활용될 수 있을 것으로 판단되었다.

• Composites Research
• /
• 제12권6호
• /
• pp.83-89
• /
• 1999

고무/폴리머 복합재료의 충격강도와 파괴 기구를 기지재의 체인 유연성을 나타내는 특성비 $C_{\infty}$와 강화고무의 입자 크기의 두 가지 관점에서 연구하였다. 본 연구에서 특성비는 PPO와 PS폴리머의 조성비에 의하여 조절하였다. 아이조드 충격 시험과 주사전자현미경에 의한 파단면 관찰을 수행하였다. 전단항복과 크래이징으로 대별되는 소성 변형 기구의 이해를 넓히기 위해 유한요소해석을 수행하였다. 전단항복은 폴리머의 유연성이 상대적으로 낮거나 고무의 입자 크기가 작은 경우에 잘 나타났다.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.52-57
• /
• 2010

The analysis of a crack in a bone-like material is performed numerically. The bone-like material is hierarchically structured and each hierarchy is structured by mineral platelets and protein matrix through staggered arrangement. Mechanical behavior of the composite can be analyzed using tension shear chain model. The Dugdale model is adopted to evaluate the fracture energy of Bone-like material. The fracture energy dissipation is assumed to concentrate within a strip near the crack tip along the prospective crack path. Fracture criterion of the bone-like material is estimated by using J integral. Effects of hierarchical level, ratio of elastic modulus of mineral to protein, aspect ratio of mineral platelet and volume fraction on J integral are investigated. It is found that the J integral decreases as elastic modulus ratio and hierarchy level increase. It is also shown that the J integral increases as the volume fraction and aspect ratio decrease.

• Kyungpook Mathematical Journal
• /
• 제55권2호
• /
• pp.289-300
• /
• 2015

In [9], the author extends the definition of lifting and supplemented modules to ${\delta}$-lifting and ${\delta}$-supplemented by replacing "small submodule" with "${\delta}$-small submodule" introduced by Zhou in [13]. The aim of this paper is to show new properties of ${\delta}$-lifting and ${\delta}$-supplemented modules. Especially, we show that any finite direct sum of ${\delta}$-hollow modules is ${\delta}$-supplemented. On the other hand, the notion of amply ${\delta}$-supplemented modules is studied as a generalization of amply supplemented modules and several properties of these modules are given. We also prove that a module M is Artinian if and only if M is amply ${\delta}$-supplemented and satisfies Descending Chain Condition (DCC) on ${\delta}$-supplemented modules and on ${\delta}$-small submodules. Finally, we obtain the following result: a ring R is right Artinian if and only if R is a ${\delta}$-semiperfect ring which satisfies DCC on ${\delta}$-small right ideals of R.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1038-1043
• /
• 2003

There are many industrial applications including thin-body structures such as fins. For the numerical modeling of radiation of sound from thin bodies, the conventional boundary element method (BEM) using the Helmholtz integral equation fails to yield a reliable solution. Therefore, many researchers have tried to solve the thin-body acoustic problems. In the area of the design sensitivity analysis (DSA) and optimization methods, however, there has been just a few study reported. Especially fur the thin-body acoustics, however, no further study in the DSA and optimization fields has been reported. In this research, the normal derivative integral equation is adopted as an analysis formulation in the thin-body acoustics, and then used for the sizing DSA and optimization. Since the gradient-based method is used for the optimization, it is important to have accurate gradients (design sensitivities) of the objective function and constraints with respect to the design variables. The DSA formulations are derived through chain-ruled derivatives using the finite element method (FEM) and BEM by using the direct differentiation and continuum variation concepts. The proposed approaches are implemented and validated using a numerical example.

• Structural Engineering and Mechanics
• /
• 제74권1호
• /
• pp.33-54
• /
• 2020

The aim of this study is to calculate natural frequencies and harmonic responses of cracked frames with general boundary conditions by using transfer matrix method (TMM). The TMM is a straightforward technique to obtain harmonic responses and natural frequencies of frame structures as the method is based on constructing a relationship between state vectors of two ends of structure by a chain multiplication procedure. A single variable shear deformation theory (SVSDT) is applied, as well as, Timoshenko beam theory (TBT) and Euler-Bernoulli beam theory (EBT) for comparison purposes. Firstly, free vibration analysis of intact and cracked frames are performed for different crack ratios using TMM. The crack is modelled by means of a linear rotational spring that divides frame members into segments. The results are verified by experimental data and finite element method (FEM) solutions. The harmonic response curves that represent resonant and anti-resonant frequencies directly are plotted for various crack lengths. It is seen that the TMM can be used effectively for harmonic response analysis of cracked frames as well as natural frequencies calculation. The results imply that the SVSDT is an efficient alternative for investigation of cracked frame vibrations especially with thick frame members. Moreover, EBT results can easily be obtained by ignoring shear deformation related terms from governing equation of motion of SVSDT.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권3호
• /
• pp.275-282
• /
• 2013

Applications such as vibration isolation, gravity compensation, pick-and-place machines, etc., would benefit from (long-stroke) cylindrical/tubular permanent magnet (PM) actuators with integrated passive gravity compensation to minimize the power consumption. As an example, in component placing (pick-and-place) machines on printed circuit boards, passive devices allow the powerless counteraction of translator including nozzles or tooling bits. In these applications, an increasing demand is arising for high-speed actuation with high precision and bandwidth capability mainly due to the placement head being at the foundation of the motion chain, hence, a large mass of this device will result in high force/power requirements for the driving mechanism (i.e. an H-bridge with three linear permanent magnet motors placed in an H-configuration). This paper investigates a tubular actuator topology combined with passive gravity compensation. These two functionalities are separately introduced, where the combination is verified using comprehensive three dimensional (3D) finite element analyses.

• Structural Engineering and Mechanics
• /
• 제87권1호
• /
• pp.1-18
• /
• 2023

The paper presents a Bayesian Finite element (FE) model updating methodology by utilizing modal data. The dynamic condensation technique is adopted in this work to reduce the full system model to a smaller model version such that the degrees of freedom (DOFs) in the reduced model correspond to the observed DOFs, which facilitates the model updating procedure without any mode-matching. The present work considers both the MPV and the covariance matrix of the modal parameters as the modal data. Besides, the modal data identified from multiple setups is considered for the model updating procedure, keeping in view of the realistic scenario of inability of limited number of sensors to measure the response of all the interested DOFs of a large structure. A relationship is established between the modal data and structural parameters based on the eigensystem equation through the introduction of additional uncertain parameters in the form of modal frequencies and partial mode shapes. A novel sampling strategy known as the Metropolis-within-Gibbs (MWG) sampler is proposed to sample from the posterior Probability Density Function (PDF). The effectiveness of the proposed approach is demonstrated by considering both simulated and experimental examples.

• Smart Structures and Systems
• /
• 제31권1호
• /
• pp.29-43
• /
• 2023

This study investigates the possibility of damage detection of a real bridge by means of a modal parameter-based finite element (FE) model update. Field moving vehicle experiments were conducted on an actual steel plate girder bridge. In the damage experiment, cracks were applied to the bridge to simulate damage states. A fast Bayesian FFT method was employed to identify and quantify uncertainties of the modal parameters then these modal parameters were used in the Bayesian model update. Material properties and boundary conditions are taken as uncertainties and updated in the model update process. Observations showed that although some differences existed in the results obtained from different model classes, the discrepancy between modal parameters of the FE model and those experimentally obtained was reduced after the model update process, and the updated parameters in the numerical model were indeed affected by the damage. The importance of boundary conditions in the model updating process is also observed. The capability of the MCMC model update method for application to the actual bridge structure is assessed, and the limitation of FE model update in damage detection of bridges using only modal parameters is observed.

• 자동차안전학회지
• /
• 제15권4호
• /
• pp.39-47
• /
• 2023

Research on the safety of autonomous vehicle is being conducted in various countries, including the European Union, and computer simulation techniques so called 'Virtual Tool Chain' are mainly used. As part of the crash safety study of autonomous vehicle, 25 car to car collision scenarios were provided as a result of a real accident-based accident reproduction analysis study conducted by a domestic research institution, and a vehicle crash analysis was performed using the FE car to car model of the Honda Accord. In order to analyze the results of the car to car simulation and to construct a database, major crash parameters were selected as impact speed, angle, location, and overlap, and a method of defining them in an indexed form was presented. In order to compare the crash severity of each scenario, a value obtained by integrating the resultant acceleration measured by the ACU of the vehicle was applied. The equivalent collision test mode was derived by comparing the crash severity of the regulation test mode, 30 deg rigid barrier mode, in the same way.