• Journal of the Korean Home Economics Association
• /
• v.30 no.1
• /
• pp.1-9
• /
• 1992

Graft polymerization mechanism and rate of polymerization of MMA and MMA/4-VP onto cellulose fiber using Ce(IV) salt as an initiatior were investigated. It was shown that the concentration of Ce(IV) salt affected on the graft yield, graft efficiency, total conversion and the rate of graft polymerization. The graft yield and total cenversion for MMA grafted polymer were significantly higher than those for MMA/4-VP grafted polymer with variation of CAN concentration. In this system the oxidative termination by Ce(IV) salt was considered particularly in higher concentration Ce(IV) ion. The change in the mode of termination reactions with variation of CAN concentration made possible the presence of an optimum Ce(IV) ion concentration for maximum graft yield.

• Journal of the Korean Ceramic Society
• /
• v.36 no.4
• /
• pp.372-379
• /
• 1999

Hihg-toughened ceria-stabilized tetragonal zirconia ceramics with irregular grain shape and undulated grain boundary was prepared by ceria doping. Irregularity of grain shapes was increased with the amount of doped ceria. But in case of the large amount of doped ceria grain boundary was migrated to the reverse direction of DIGM. Ceria-stabilized zirconia ceramics annealed at 1650$^{\circ}C$ for 2h after twice dippings into cerium nitrate solu-tion of 0.2M and sintering at 1500$^{\circ}C$ for 2h showed the highest grain boundary length with a value of 23.6$\mu\textrm{m}$ Ceria concentration difference between convex and concave sides in irregular grains was observed over 1 mol% but not observed in normal grains, Specimens with normal grain shape showed intergranular fracture mode whereas the specimens with irregular grain shape showed transgranular fracture mode.

• Journal of Magnetics
• /
• v.4 no.3
• /
• pp.102-106
• /
• 1999

Ce exhibits the intermediate valence (IV) state both as an element and in its compounds. In the present review characteristic behavior of the materials showing the IV state are described. Then the methods of producing this state : the application of the external pressure, temperature and magnetic field as well as the alloying are being discussed. An identification of the IV state is frequently not a simple goal and the best results can be obtained using a combination of various independent methods. Particular attention is paid to the X-ray spectroscopy, lattice parameters and the magnetic properties. As the examples of the IV state in the Ce compounds the properties of following materials are reported : CeRhSb, $CeCu_5In_7, CeAg_6In_6, Sc_{1-x}Ce_xFe_4Al_8 $and for comparison Sc1-xYbxFe4Al8.

• Journal of the Korean Chemical Society
• /
• v.57 no.1
• /
• pp.52-62
• /
• 2013

The interaction of titanium (IV), yttrium (III), zirconium (IV), palladium (II) and cerium (IV) with deprotonated enrofloxacin leads to the formation of the neutral or cationic mononuclear complexes. The isolated solid complexes have been characterized with physicochemical and spectroscopic techniques and thermogravimeteric analyses. The spectroscopic data indicate that the enrofloxacin ligand is on the deprotonated mode acting as bidentate ligand coordinated to the metal ions through the ketone oxygen and a carboxylato oxygen and the metal ions completed the coordination number with water molecules. The thermal decomposition mechanisms proposed for enrofloxacin and their metal complexes were discussed. The activation energies, $E^*$, enthalpies, ${\Delta}H^*$, entropies, ${\Delta}S^*$ and Gibbs free energies, ${\Delta}G^*$, of the thermal decomposition reactions have been derived from thermogravimetric (TG) and differential thermogravimetric (DTG) curves, using Coats-Redfern (CR) and Horowitz-Metzeger (HM) methods. The antimicrobial activity has been evaluated against six different microorganisms.

• Archives of Pharmacal Research
• /
• v.19 no.3
• /
• pp.240-242
• /
• 1996

We have reported the convenient biomimetic methodology for the synthesis of all kinds of substituent pattern benzo[c]phenanthridine alkaloids (Hanaoka et al., 1990; Hanaoka et al., 1991). Regioselective demethylation of C-8 position on oxyfagaridine (5), an intermediate for the synthesis of Fagaridine (4), would afford the precursor for the synthesis of Isofagaridine because the strong hydrogen bonding between amide and hydroxyl group of C-7 position probably resists to be reacted with week base and electrophiles. Thus, a selective alkylation of dihydroxy compound supposed to be possible and be lead to the target compound, Isofagaridine.

• Korean Journal of Materials Research
• /
• v.15 no.12
• /
• pp.818-823
• /
• 2005

Sub-micron colloidal silica particles coated with nano-sized ceria were prepared by mixing of its silica and cerium salts hydrolysis, and modified by hydrothermal reaction. By using the slurries with and without hydrothermal modification containing above particles, oxide film coated on silicon wafer was polished. The modified slurries had higher polish rate due to increase of ceria fraction to silica through hydrothermal reaction. They revealed higher stability in wide range of pH $2\~10$ than ceria coated silica slurries without its modification.

• Journal of Sensor Science and Technology
• /
• v.24 no.2
• /
• pp.96-100
• /
• 2015

In the present study, we developed a real-time radiation-monitoring sensor for an underwater radiation-monitoring system and evaluated its effectiveness using reference radiation sources. The monitoring sensor was designed and miniaturized using a silicon photomultiplier (SiPM) and a cerium-doped-gadolinium-aluminum-gallium-garnet (Ce:GAGG) scintillator, and an underwater wireless monitoring system was implemented by employing a remote Bluetooth communication module. An acrylic water tank and reference radiation sources ($^{137}Cs$, $^{90}Sr$) were used to evaluate the effectiveness of the monitoring sensor. The underwater monitoring sensor's detection response and efficiency for gamma rays and beta particles as well as the linearity of the response according to the gammaray intensity were verified through an evaluation. This evaluation is expected to contribute to the development of base technology for an underwater radiation-monitoring system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.72-79
• /
• 1998

The goals of this research are to understand the regeneration characteristics in diesel particulate filter(DPF) using the cerium additive and throttling. The effects of throttling duration and spring tension of throttling valve were studied. Measurements were made on a 6 cylinder direct injection diesel engine and included pressure drop, filter inlet temperature, oxygen concentrations, and torque. The major conclusions of this work include; (i) the pressure drop is increased with increase of the engine load and the engine speed; (ii) the inlet temperature of the filter is reached $350^{\circ}C$ with certain engine operating condition which leads to sufficient temperature to regenerate with additive; and (iii) oxygen concentrations in the filter and engine torque during throttling operation are decreased by 2 percent and 36 percent, respectively, which are not critical about regeneration and vehicle operation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.525-528
• /
• 1999

The luminescence of bismuth and cerium doped yttrium aluminum based Phosphors $Y_{3}$/Al$_{5}$/O$_{12}$ and (Y$_{0.8}$/Gd$_{0.2}$)$_3$Al$_{5}$/O$_{12}$ prepared by a solid-state reaction method were studied. These samples which were fired at 1, 20$0^{\circ}C$ show the characteristic X-ray diffraction patters for the main phase(420) of YAG. This study indicates that the both flux and remained bismuth after the firing phosphor materials give rise to affect the photoluminescence properties. Therefore, it was investigated that both the XRD patterns arid the PL properties were affected by the controlling experimental process variables.riables.les.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.96-96
• /
• 2010

Monodispersed spherical silica-coated ceria nanoparticles were prepared through a sol-gel process using tetraethylorthosilicate (TEOS) and ceria fine particles. In this process, ceria fine particles were also prepared from cerium nitrate. The mean size of ceria particles was 300nm. Silica nanoparticles with narrow particle size distribution were prepared by controlled hydrolysis of TEOS solution. The silica sols were obtained by peptization, the process of redispersing a coagulated colloid, and were coated on ceria particles by the control of the weight ratio of silica/ceria and the pH of the mixture in aqueous solution. The morphologies of particles were characterized with scaning electron microscopy(SEM), transmission electron microscopy(TEM) and atomic force microscopy(AFM). The coating thickness of silica particles obtained by using this method was controlled in the range of 30 - 70nm.