• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.433-438
• /
• 2020

The aim of this study was to investigate the mechanical properties of pit and fissure sealant containing cerium oxide nano particles(CNP). Used to mix with pit and fissure sealant (Concise^TM, USA). CNP was added into liquid (0- 4.0 wt%) of pit and fissure sealant. The specimens for the vickers hardness (VHN; 10 × 2 mm), Three-point flexure (FS; 2 × 2 × 25 mm) with flexure modulus (FM) were obtained from cements at 1, 7, and 14 days after storing in (37±1)℃ distilled water. All mechanical strength tests were conducted using machine (Instron 3344) with a cross-head speed of 1 mm/min. Data were statistically analyzed by one-way ANOVA and Duncan posthoc test(p<0.05). Mechanical properties of conventional pit and fissure sealant could be enhanced by addition of CNP. Three-point flexure and modulus of pit and fissure sealant containing CNP were showed a slightly higher value not significantly with the group(p>0.05). The vickers hardness values were increase significantly with incubation time(p<0.05). Results indicated that CNP can be used considered as potential reinforcing agent for increasing mechanical properties for conventional pit and fissure sealant. Therefore, it was suggest that the additional effects of CNP and research on a wide range of substances.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.96.2-96.2
• /
• 2005

• Carbon letters
• /
• v.16 no.4
• /
• pp.270-274
• /
• 2015

• Bulletin of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.369-373
• /
• 2002

The liquid phase oxidation of p-xylene has been carried out with oxygen-enriched gas, and the manganese component was precipitated probably via over-oxidation to $Mn^{4+}$. The precipitation increased with rising oxygen concentration in the reaction gas and occurred mainly in the later part of the oxidation. The activity of the reaction decreased, and the blackening of the product and side reactions to carbon dioxide increased with the degree of precipitation. Precipitation can be decreased with the addition of metal ions, such as cerium, chromium and iron.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.2
• /
• pp.123-129
• /
• 2003

Oxindoles(6a-g) are obtained by rhodium(II)-catalyzed Wolff rearrangement of diazoquinolinediones in moderate yields. Treatment of 6a-g oxindole derivatives reacted with CAN in acetonitrile at room temperature to gave 7a-g isatins in good yields. The structures of these compound were identified by MP, IR and NMR-spectra.

• Environmental Engineering Research
• /
• v.18 no.4
• /
• pp.211-219
• /
• 2013

Rare-earth manganites have a great potential for environmental applications based on their chemical and physical properties. The use of rare-earth manganites as catalysts for environmentally essential reactions was reviewed. Artificial neural networks were used to assess the catalytic activity in oxidation reactions. Relative catalytic activities of the catalysts were further discussed. We concluded that cerium manganite is the most practicable catalyst for technological purposes.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.359-360
• /
• 2013

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.05a
• /
• pp.227-228
• /
• 2017

In this paper, electrolytic behavior of Cerium and Ce-Bi ion system was studied. The electrochemical behavior of Ce was studied in $LiCl-KCl-CeCl_3$ molten salts using electrochemical techniques Cyclic Voltammetry on tungsten electrodes at 773K. During the process of CV electrolysis, intermetallic compound were observed of Ce, Cex-Biy. Further study, in order to determine clarity of diffusion coefficient in this experiment, we will compare result of electrochemistry method and we also need to quantitative research.

• Particle and aerosol research
• /
• v.12 no.2
• /
• pp.37-42
• /
• 2016

$CeO_2$ nanoparticles were prepared by a flame spray pyrolysis from aqueous solution of cerium nitrate. The morphology, structure crystallinity and specific surface area of as-prepared nanoparticles were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and Brunauer-Emmett-Telle (BET). The $CeO_2$ nanoparticles about 5 nm in diameter showed a cubic fluorite structure and polyhedral morphology. The average particle size increased as the cerium nitrate concentration increased. UV absorption performance of the as-prepared nanoparticles was measured by UV-visible spectroscopy. UV absorption of $CeO_2$ nanoparticles was more effective than that of commercial $TiO_2$ nanoparticles. Effect of dopants such as Ti and Zn to $CeO_2$ nanoparticles on UV absorption properties was also investigated. In case of $Ti/CeO_2$, and $Zn/CeO_2$ nanoparticles, they showed a little higher UV absorption values compared with $CeO_2$ nanoparticles. The as-prepared nanoparticles can be promising materials with high UV absorption value.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.866-871
• /
• 1997

The com starch was treated with propylene oxide, 1,2-epoxybutane, glycidyl methacrylate, maleic anhydride, caprolactone, respectively, in order to alter the hydrophilicity and the reactivity of starch. When the starch was not dried, poor reaction was observed except the reaction with propylene oxide or maleic anhydride. The treated starches were grafted with styrene by several different polymerization methods. Solution polymerization and redox polymerization using cerium(IV) ion show poor grafting efficiency and poor yield. Encapsulation of starch with polystyrene by suspension polymerization was difficult due to the hydrophilicity of the starch. Among the examined methods, emulsion polymerization was found to be the suitable way to graft styrene onto starch.