• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.9 no.1
• /
• pp.82-90
• /
• 2000

In esthetic dentistry, color and strength are basic requirements for the long-term success of the restorative materials. Several all ceramic systems have been introduced to esthetic dentistry recently. However, the inherent natures of ceramic material, the application of all ceramic system is mainly limited to single tooth restorations. With the improvement of material science, the alumina and zirconia/alumina composite power and block can be applied to fabrication of all ceramic bridges. The conventional inceram core fabrication takes time for sintering however, the shaping of block with a copy milling machine can reduce great amount of time. The block is easy to manipulate and prepare in any shape accurately. This clinical report demonstrates the application of all ceramic ante rior 3 unit bridge with a alumina block in CELAY system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.331-331
• /
• 2010

본 연구에서는 차량 하중에 의해 압전체가 변형되어 전기에너지를 발생시키는 도로용 압전에너지 하베스터를 개발하기위한 설계 및 실험을 진행하였다. 최대의 전기에너지가 발생되도록 압전사각 시트를 닥터브레이드로 제작하여, 이를 강판에 부착하고 고유주파수를 낮추기 위해 끝단에 질량을 달아 캔틸레버형태의 구조로 제작하였으며 끝단 질량의 변화와 가진주파수에 따른 발전특성을 비교하였다. 이로써 도로용 센서 및 방향지시등의 전원으로 사용하기 위한 도로매설용 압전 에너지 하베스터의 타당성을 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.19-19
• /
• 2010

현재 산업에서 높은 정밀성과 설치의 간편함으로 이용량이 증가하고 있는 초음파 유량계는 압전진동자를 사용하여 측정을 한다. 일반적으로 초음파 유량계에서 초음파를 발생하고 수신하는 압전 세라믹 진동자의 경우 대부분 $200^{\circ}C$ 이상의 고온에서는 사용이 불가능하다. 따라서 고온에서의 이용을 위한 사용가능 온도의 영역을 개선하기 위한 조성이나 구조적인 변화가 필요하였고, 조성변화에 있어서는 한계가 있기 때문에 구조 측면에서 접근하고자 하였다. 초음파 유량계의 구조에 있어 외접형 도파관 방식을 선택하였으며, 도파관의 길이, 방열판의 개수, 재질 등의 변수에 대하여 시뮬레이션을 하였다. 시뮬레이션 결과를 바탕으로 얻어진 결과에 대하여 샘플을 제작하였으며, 압전 진동자에 도달되는 온도를 평가 하였을 시 방열판에 대한 온도감소효과를 얻을 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.271-271
• /
• 2010

$BaTiO_3$(BT) has high permittivity so that has been applied to dielectric and insulator materials in 3D system-level package integration. In order to achieve excellent performance of device, the BT layer should be highly dense. In this study, BT thick films were prepared by the inkjet printing method. And these films were cured at $280^{\circ}C$ after infiltration of polymer resin. As a result, we have successfully fabricated not only the inkjet-printed hybrid BT film but also metal-insulator-metal(MIM) capacitor without sintering process. Changes in the dielectric constant of BT hybrid film with particle size and packing density were investigated. The dielectric constant was increased with increasing packing density and particle size. Further, the BT hybrid film using two different size particles had even higher packing density and dielectric constant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.177-177
• /
• 2008

The effect of several $SiO_2-B_2O_3-Al_2O_3$-R(R;Ca, Sr, Ba) borosilicate glass system on sintering behavior, dielectric properties and mechanical properties of glass/ceramic composites were investigated. The amount of '+2 valency' metal elements(Ca, Sr, Ba) were examined in LTCC composite of low k glass with cordierite filler. It was sintered for 60minutes in temperature range from 850C to 950. Properties of frit and glass/ceramic composites were analyzed by DTA, XRD, SEM, Network Analyzer, UTM and so on. Dielectric constant ($\varepsilon_r$) and $Q{\times}f_0$ (Q) of the composite with 50% glass contents demonstrated $\varepsilon_r$ = 5.4 $Q{\times}f_0$ = 1600 GHz. Sintering was complete and maximum bending strength of 160MPa was obtained.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.2
• /
• pp.106-119
• /
• 1996

The ceramic has various high mechanical properties such as heat, abrasion, corrosion resistance and high temperature strength compared with metal. It also has low speciffic weight, low thermal expansibillity, low thermal conductivity. However, it could not be used as structural material since it is brittle and difficult for the machining. Therefore, there have been many researches to attempt to join ceramic with metal which is full of ductillity in order to compensate the weakness of ceramic.The problem is that residual stress develops around the joint area while the ceramic/metal joint material is cooled from high joining temperature to room temperature due to remarkable difference of thermal expansion coefficients between ceramic and metal. Especially, the residual stress at both edges of the specimen reduces the strngth of joint to a large amount by forming a singular stress field. In this study, two dimensional finite element method is attempted for the thermal elastic analysis. The joint residual stress of ceramic/metal developed in the cooling process is investigated and the change of joint residual stress resulted from the repetitive heat cycle is also examined. In addition, it is attempted to clarify the joint stress distribution of the case of tensile load and of the case of superposition of residual stress and actual loading stress.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.309-309
• /
• 2008

전자 산업의 발달로 인해 전자기기에 소형화, 경량화 및 다기능화가 요구되면서 고밀도화, 고집적화가 필요하게 되었다. 이와 같은 부품의 고집적화 기술로 최근 제시되고 있는 방법 중 하나는 ceramic powder로 구성된 유전층에 polymer를 infiltration시키고 cure 과정을 거쳐 소결공정 없이 유전층을 완성하는 것이다. 그리고 이 유전층을 layer 단위로 build up하는 방법을 이용하여 반복적으로 형성하는 기술이 연구되고 있다. 그러나 고충전된 polymer/ceramic composite에서 유전 특성은 기존에 알려진 저충전 구조에서의 mixing 이론을 따를 것인지에 대한 실증적인 연구는 이루어지지 않았다. 본 연구에서는 ceramic powder $Al_2O_3$를 이용하여 polymer의 함량을 최소화하여 paste 를 제조하고, 스크린 프린팅 방법으로 인쇄하여 ceramic layer를 제작하였다. 그리고 이 위에 polymer infiltration 과정을 동하여 고충전 ceramic/polymer composite layer를 제작하였다. 또한, $Al_2O_3$를 filter로 사용한 저충전 polymer/ceramic composite에서의 mixing rule과 비교하여 복합체의 유전 특성을 설명하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.331-332
• /
• 2006

Ag-ceramic composite materials were investigated as internal electrodes for multilayer ceramic actuators (MLCA). Ag-ceramic pastes were prepared by adding PZT-based ceramic powders to a Ag patse in a range of 0 to 50 wt.%. PZT/Ag-PZT multilayered laminates were fabricated by tape casting and fired at low temperatures below $950^{\circ}C$. The addition of ceramic into the Ag electrode resulted in a decrease in the thermal expansion mismatch between the electrode and the ceramic sheet. The maximum strain of PZT/Ag-PZT multilayered actuators were $9{\times}10^{-4}$ under an electric field of 2.5MV/m. In conclusion, Ag-PZT composite materials are efficient for low cost piezoelectric MLCAs.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.603-608
• /
• 2015

Alumina powder have been expanded its application in industry and required to control its morphology such as powder size and aspect ratio of single particle. It can be synthesized by molten - salt method which is possible to obtain various shapes of ceramic particles by controlling the growth direction because each crystal face has different growth rate. In this study, various combinations of salts such as NaCl, $Na_2SO_4$, $Na_3PO_4$ and their mixture were used for control the growth of plate like alumina particle from the initial stage of synthesis because salt having different ionic strength can control the growth direction of ceramic particle under its melting condition around $800{\sim}900^{\circ}C$, and growth behavior of plate-like alumina particle with different reaction conditions such as temperature and concentration on the crystal size and shape was studied.

• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.163-179
• /
• 2011

This study was to identify the material characteristics and provenance of the crucibles, potteries and roof tiles from the Wonsinheungdong site in Daejeon, Korea. Similar mineral composition of each samples showed by microscopic observation and X-ray diffraction analysis. However, wall thickness and mineral characterization of each ceramic artifacts are quite different. The pottery is characterized by thin wall with 0.5 to 0.7 cm and fine grained clay matrix. While the crucible and roof tile has thick wall with 1.3 to 2.5 cm, poorly sorted texture of many quarz, orthoclase and plagioclase whithin ceramic fabric. And large elonagated voids formed by hydrocarbone of straw during the firing and loose matrix obseved in crucible. All ceramic samples and ground soil of the site show similar mineralogical characteristics geochemical behavior and clay-mineralization degree. This indicates making that the soil is probable to be a raw material of all ceramic from the Wonsinheungdong site. Also, firing temperature of most ceramic artifacts are estimated as 850 of all ceramic from the Wonsinheungdong site. Also, firing temperature of most ceramic artifacts are estimated as 850 to $950^{\circ}C$ but hardest pottery fired high temperature between 1,050 to $1,150^{\circ}C$. The vitreous molten materials interpreted in slag included segregation of copper and tin. But it can not exclude the possibility that the glass molten material because observed reddish and greenish vitreous fine structure under microscopic.