• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.3
• /
• pp.361-369
• /
• 2004

A metal fiber bed has seldom been applied to the practical filtration process despite its excellent mechanical and chemical stability. The filter-bed used in this work was highly porous with open structure, of which apparent porosity was 80 ∼ 90%. Although pressure loss across the filter-bed was very low, separation efficiency was found to be quite high. This paper focuses on the basic filtration mechanisms of a metal filter-bed and a thin ceramic filter from fly ash for reference. The experimental parameters were face velocity, dust loading and porosity of filter-bed. Pressure drop increased with increasing face velocity and dust feeding load for both filters. It also showed that dust particles deposited in the deep flow path, finally resulting in clogging the pore channels. It thereby indicates that the dominating mechanism of the metal filter-bed would be depth filtration. Meanwhile, the thin fly ash composite filters trapped the aerated dust mainly on the surface of the filter medium, so that the instantaneously formed dust layer might cause a steep increase of pressure drop across the filtration system.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.3
• /
• pp.371-380
• /
• 2004

In the dust separation by using porous filter media, the structure of dust layer deposited on the filter surface of filter medium directly affects the effective filtration. The present study has investigated the specific resistance (K$_2$') of the dust layer and its porosity ($\varepsilon$$_{c}$) for three different filters; FA composite filter, metal fiber filter and stainless filter. The specific resistance (K$_2$') increased and at the same time the cake porosity ($\varepsilon$$_{c}$) decreased with the increase of filtration velocity, possibly due to the compressible effect of dust layer. However, under the low dust concentration, subsequent dust particles would block the open channels through the layer resulting in high specific resistance of the layer. The FA composite filter among three filters was shown to be the most effective filter for dust cake filtration at low filtration velocities less than 0.1 m/s for an approximate dust concentration of 5 g/㎥.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.6
• /
• pp.394-399
• /
• 2000

Langasite (LGS) is a material hoped to meet needs required of new base materials for future communication devices (e.g.SAW filters). In this study, synthesis of new materials was pursued by developing new compounds with the host structure of Langasite in hopes to obtain materials with improved characteristics; compounds including $La_3$$Ta_{0.5}$$Ga_{5.5}$$O_{14}$(LTG)and $La_3$$Nb_{0.25}$$Ta_{0.25}$$Ga_{5.5}$$O_{14}$(LNTG) were synthesized by solid state reactions. Characteristics of the compound synthesized in question were determined. The single crystals of Langasite-type were grown using the Czochralski method. The growth conditions for LTG and LNTG were studied and were found to be similar to those of LGS. The growth characteristics of LNTG were observed by studying etch pit formation density along the crystal length.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.648-652
• /
• 2009

Ceramic fiber separator is the promising material for thermal battery system because it reduces the production cost and offers the potential to a new application compared to a pellet type electrolyte. The electrolyte separator for thermal battery should be easily handled and loaded a large amount of the molten lithium salt. Ceramic fibers were used as an electrolyte separator and the lithium based molten salts were infiltrated into the ceramic filters. Leakage of molten salt (several lithium salts) leads to short-circuit during the thermal battery operation. In this study, a uniform and fine SiOC mat with fibers ranging from 1 to 3 ${\mu}m$ was obtained by electrospinning of polycarbosilane and pyrolysis. The optimum spinning conditions for obtaining fine diameters of SiOC fiber were controlled by the solution composition and concentration, applied voltage and spinning rate, release rate by porosity. The pore structures of the ceramic filter and the melting properties of the lithium salts affected to the electrolyte loading and leakage. The importance of the fiber size and porosity and their control was discussed and the mechanical properties were also discussed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.451-463
• /
• 2004

The performance of disk-type catalytic filters impregnated by TiO$_2$ or TiO$_2$-3Al$_2$O$_3$ㆍ 2SiO$_2$ supports and V$_2$O$_{5}$ catalyst was evaluated for selective catalytic reduction (SCR) of NO with ammonia as a reductant. XRD, FT -IR, BET and SEM were used to characterize the catalytic filters prepared in this work. Optimal V$_2$O$_{5}$ loading and reaction temperature for V$_2$O$_{5}$/TiO$_2$ catalytic filters were 3-6 wt.% and 350-40$0^{\circ}C$ at GHSV 14,300 $hr^{-1}$ in the presence of oxygen, respectively. With increasing the V$_2$O$_{5}$ loading from 0.5 to 6 wt%, NO conversion increased from 24 to 96% at 40$0^{\circ}C$ and 14.300$hr^{-1}$, and maintained at 80% over in the V$_2$O$_{5}$ loading range of 3-6 wt.% and then dropped at V$_2$O$_{5}$ loading of 7wt.% over. In comparing V$_2$O$_{5}$/ TiO$_2$ and V$_2$O$_{5}$/ TiO$_2$-3Al$_2$O$_3$ㆍ2SiO$_2$ catalytic fillers, which have same 3wt.% V$_2$O$_{5}$ loading, the V$_2$O$_{5}$/ TiO$_2$-3A1$_2$O$_3$ㆍ2SiO$_2$ catalytic filter showed higher activity than V$_2$O$_{5}$/ TiO$_2$ catalytic filter, but higher differential pressure drops owing to its low air permeability. low air permeability.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.209-210
• /
• 1999

오존 precursor인 NOx의 배출기준은 점차 강화되고 있고 NOx의 처리기술로는 선택적 촉매환원법 (Selective Catalytic Reduction; SCR)이 가장 널리 사용되고 있다. 국내 SCR 적용공정의 경우, 100% 수입에 의존하고 있어 support 촉매의 국산화가 절실히 요구되고있다. 이에 본 연구에서는 support로 섬유형 세라믹 필터를 사용하여 CuO, V$_2$O$_{5}$ 촉매를 담지시켜 NOx의 제거실험을 수행하였다.(중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.244-245
• /
• 1999

고온 집진을 위한 세라믹 필터의 개발은 1980년대 이후 유럽을 중심으로 활발한 연구가 수행되고 있으며 기존 대기오염 방지 시설로는 처리가 불가능한 고온 공정에 상용화 되어 있고 국내에도 비철금속, 탄화공정, 유리 용해로 등의 공정에 세라믹 필터을 이용한 고온 집진 공정이 설치되어있다. 본 연구에서는 국내에서 개발한 저밀도 세라믹 필터를 이용해 300~$600^{\circ}C$의 고온에서 장시간 실험을 수행 하였으며 장기 집진시 차압과 효율 그리고 세라믹 필터의 특성 변화를 관찰하였다.(중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.434-435
• /
• 2000

SCR 공정은 고정원에서 발생하는 질소 화합물을 90% 이상 제거할 수 있는 방법으로 현재로서는 기술성, 경제성 및 법규제치의 만족이라는 측면에서 NOx 제거를 위한 BACT(Best Available Control Technology)로 인식되고 있다. 하지만 먼지를 포함한 배가스는 전처리를 해야하는 한계가 있다$^{3)}$ . 이에 본 연구에서는 이미 확인된 고효율의 CuO 담지 섬유형 세라믹 필터를 이용하여 먼지 주입에 따른 NOx 제거실험을 수행하였다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.361-363
• /
• 2000

디젤 자동차는 가솔린 자동차에 비하여 연료소비효율이 높고, 경제성이 좋으며 고출력을 낼 수 있어 이에 대한 수요가 증가하고 있지만, 디젤엔진에서 배출되는 매연과 가스로 인한 오염도 심각한 수준에 달하였다. 엔진의 전자화, 고압분사기술등 여러 자동차 관련기술의 발달로 배출오염물질의 저감에 큰 발전을 이루어 왔으나, 계속적으로 강화되어지는 배출규제에 맞추기 위해서는 입자상 물질 후처리 장치의 개발이 가장 현실적인 대안으로 제기되고 있다. (중략)

• Journal of the Korean Ceramic Society
• /
• v.27 no.2
• /
• pp.179-186
• /
• 1990

Silicon carbide porous materials used for hot gas filters were prepared using oxide binder. Chamotte, frit and H3PO4 were starting materials to synthesize the oxide binder for high temperature-use. Room temperature bending strength of the silicon carbide porous body was increased with increasing firing temprature or with the amount of the content of frit in the oxide binder. However, in the oxidebinder fired above132$0^{\circ}C$, cristobalite form of AlPO4 phase which undergoes rapid inversion became more prominent with increasing firing time. the average pore size of the silicon carbide filter materials was found to be about one third of the average grain size of the silicon carbide powder used in this study.