• 제목/요약/키워드: centrifuge test

검색결과 264건 처리시간 0.022초

연약점토의 자중압밀특성 연구 (A Characteristic Study on Selfweight Consolidation of Soft Clay)

  • 유남재;유건선;이종호
    • 산업기술연구
    • /
    • 제16권
    • /
    • pp.175-179
    • /
    • 1996
  • This research is the experimental and numerical study of investigating the characteristics of consolidation due to selfweight of soft marine clay. Column tests and centrifuge tests were carried out to selfweight of soft marine clay. Column tests and centrifuge tests were carried out to simulate the selfweight consolidations in field. Tests were conducted with changing drain boundary conditions and initial void ratios corresponding to four and five times of liquid limits. The RI meter was used to measure void ratio during consolidation of sample in column tests. Test results were analyzed by using the Terzaghi's infinitesimal strain theory and the finite strain theory.

  • PDF

역 T 형 옹벽에 작용하는 연직토압분포 (Vertical Earth Pressure Distribution on Cantilever Retaining Wall)

  • 유남재;이명욱
    • 산업기술연구
    • /
    • 제16권
    • /
    • pp.181-189
    • /
    • 1996
  • Centrifuge model tests of cantilever retaining wall were performed to investigate the vertical stress distribution due to selfweight of backfill material. Model tests were carried out to find the effect of arching action on vertical stress distribution by changing the roughness of rigid boundary slope and the distance between retaining wall and boudary slope. A reduced scale model of cantilever retaining wall was made with concrete and Jumunjin Standary Sand with 80 % of relative density was used as foundation and backfill material. Centrifuge tests were performed by increasing g-level up to 40 g with measuring vertical stress induced by selfweight of backfill material. Test results on vertical stress distribution were analyzed and compared with results of Silo theory.

  • PDF

과재하중에 의한 역T형 옹벽의 활동거동에 관한 원심모형실험 (Centrifuge Model Tests on Sliding Behavior of Cantilever Retaining Wall due to Surcharges)

  • 유남재;유건선;이명욱;이종호
    • 한국지반공학회논문집
    • /
    • 제16권6호
    • /
    • pp.153-160
    • /
    • 2000
  • 본 연구는 과제하중의 재하폭과 재하위치를 매개변수로 변화시켜 옹벽의 뒤채움재 상부 지표면에서 제한폭의 과재하중작용시 그의 활동거동에 관한 실험적, 수치적 해석적 연구이다. 중력 수준을 1g, 20g,40g로 변화시켜 수행한 원심모형실험을 통해 구한 기초의 극한지지력 및 하중-침하특성, 하중-옹벽수평변위특성에 관하여 조사연구 하였다. 또한, 옹벽의 활동으로 인한 지반파괴의 영향을 받기 시작하는기초의 재하위치를 추정하기 위하여 종래의 얕은 기초의 극한지지력 실험을 수행하여 이들 결과와 함께 비교하였다. 한편, 모형실험결과와 기존의 이론식을 수정보완한 해석 결과와 비교분석하였다.

  • PDF

원심모형실험을 이용한 내진 보강된 개착식 지하역사의 거동특성 연구 (Studies on Behavior Characteristics of Retrofitted Cut-and-Cover Underground Station Using Centrifuge Test Results)

  • 김진호;이나현;이후석
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제21권2호
    • /
    • pp.24-33
    • /
    • 2017
  • 국내 도시철도 지하역사는 주로 개착식 공법으로 건설되었으며, 1970~80년대에 건설된 지하역사는 내진설계가 반영되지 않았다. 한반도 뿐 만 아니라, 전 세계적으로 지진 발생빈도는 증가하고 있는 추세이며, 내진설계가 적용되지 않은 기존 지하역사에 지진이 발생될 경우 막대한 인명 및 재산피해가 우려된다. 본 연구에서는 내진보강이 된 지하역사의 지반-구조물 상호작용과 보강효과를 검토하기 위해, Kobe 지진파 및 Northridge 지진파를 1/60축소모형에 적용하여 원심모형실험을 수행하였다. 내진보강은 주 부재인 기둥, 측벽, 슬래브의 강성을 증가시켜 내진보강 전후를 비교 검토하였다. 현장 조건에 따른 모형 지반을 모사하기 위해 공진주시험을 통해 실제 깊이 및 밀도에 따른 전단파 속도의 변화를 모사하였다. 지반과 구조물은 비교적으로 유사한 거동을 하였으며, 지표면으로 가까워질수록 상대변위가 증가하였다. 또한, 내진 보강전후의 지하역사 구조물의 슬래브에 비해 기둥과 측벽에서 상대변위와 모멘트 구조 거동을 통해 내진 보강 효과를 확인할 수 있었으며, 단주기인 Northridge지진파에 비해 Kobe지진파에서 구조물의 변형이 크게 발생하는 것을 통해 지진파는 주요 설계인자임을 확인할 수 있었다.

동적원심모형실험 및 응답스펙트럼해석을 통한 포화지반에 관입된 잔교식 안벽의 내진성능 평가 (Evaluation of Seismic Performance of Pile-supported Wharves Installed in Saturated Sand through Response Spectrum Analysis and Dynamic Centrifuge Model Test)

  • 윤정원;한진태;이석형
    • 한국지반공학회논문집
    • /
    • 제37권12호
    • /
    • pp.73-87
    • /
    • 2021
  • 잔교식 구조물은 선박을 안전하게 접안하여 화물을 송수신할 수 있는 구조물로서, 포화된 경사지반에 주로 설치된다. 이러한 잔교식 구조물의 내진설계 시 기준서에서는 예비 설계 방법으로 응답스펙트럼해석법을 활용하도록 제시하고 있으나, 현재 포화지반에 관입된 잔교식 구조물의 모델링 방법에 대한 지침은 부족한 실정이다. 그러므로 본 연구에서는 포화지반에 관입된 잔교식 구조물의 내진성능을 평가하기 위해 동적원심모형실험 및 응답스펙트럼해석을 수행하였다. 동적원심모형실험을 위해 잔교식 안벽 말뚝 중 일부 구간(3×3 군말뚝)을 선정하였으며, 지반 포화 여부에 따라 2가지 모델(건조, 포화)로 분류하였다. 이후 실험 모델에 지반 스프링 방법을 적용하여 응답스펙트럼해석을 수행하였다. 실험 및 해석을 비교한 결과, 건조지반 모델 및 액상화가 발생하지 않는 포화지반 모델의 경우 모멘트 차이가 최대 51% 이내로 발생하였으며, 깊이 별 모멘트를 적절히 모사하는 것으로 나타났다. 그러므로 본 모델의 경우 Terzaghi(1955)가 제시한 수평지반반력상수를 활용하여 모델링을 수행하는 것이 적절한 것으로 판단된다.

저치환율 SCP 복합지반의 2차원 유한요소 해석기법 개발과 적용 (Two Dimensional Finite Element Analysis on the Composite Ground Improved by Sand Compaction Piles with Low Area Replacement Ratio)

  • 신현영;한상재;김수삼;김재권;심성현
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.394-401
    • /
    • 2006
  • This study developed two dimensional finite element program(FE-SCP) for the analysis of a composite ground reinforced by sand compaction piles with a low area replacement ratio based on the Mohr-Coulomb elastic perfectly plastic constitutive model. Program FE-SCP give some conveniences to users such as automatic mesh generation according to the replacement ratio and the effective sand pile diameter in the post processor. Also, it contains optimum processor in calculation of In-situ stress equilibrium considering different coefficient of earth pressure between sand pile and surrounding clay. Estimated stress-strain behavior using FE-SCP and the measured one from a centrifuge test showed good agreement comparing to the result from a general finite element program.

  • PDF

원심모형실험을 통한 폐기물 매립장의 사면안정성 평가 (Slope Stability Analysis of Waste Landfill by Centrifuge Model Test)

  • 신은철;오영인;허열
    • 한국지반공학회논문집
    • /
    • 제16권2호
    • /
    • pp.145-154
    • /
    • 2000
  • 오늘날 폐기물 매립장의 구조적 안정성문제는 국내.외적으로 중요한 문제로 대두되고 있으며, 특히, 사면의 차수체계에서의 안정성에 대한 논란이 사회적 문제로 대두되고 있다. 또한, 우리 나라는 주민들의 NIMBY 현상과 국토의 효율적 활용을 위하여, 폐기물 매립장을 해안매립지나 산간지방에 많이 건설하고 있다. 그러나, 이러한 경우 사면구배가 급해지고 토목섬유의 활용이 불가피해져 안정성에 많은 문제점을 내포하게 된다. 이 연구는 폐기물 매립장 사면의 안정성을 해석하기 위하여, 원심모형실험을 실시하였다. 또한, 이론식 및 사면안정 해석 프로그램을 이용하여 안전을 산정하였다. 이 연구에 사용한 토목섬유 점토차수재(GCLs)의 팽윤도는 침출수와 증류수의 투과수에 대하여 22~25%의 팽윤도를 보였으며, 투수계수는 투과수가 침출수일 경우, 1.47$\times$10-10cm/sec, 증류수일 경우, 8.75$\times$10-11cm/sec의 값을 나타내었다. 원심모형실험 결과, 토목섬유 점토차수재의 포화여부와 지오멤브레인(HDPE)의 표면거칠기에 따라 사면 안전율이 각각 변화함을 알 수 있었으며, 표면이 거친 지오멤브레인과 건조한 토목섬유 점토차수재를 사용하였을 때, 파괴가 발생되지 않아 사면안정성이 높은 것으로 평가되었다. 또한, 이론에 의해 도출된 사면의 안전율과 사면안정 해석프로그램에 의한 안전율 계산 시, 전자의 경우가 후자의 경우보다 작게 평가됨을 알 수 있다.

  • PDF

단일말뚝 형태의 모형시험을 통한 SCP와 GCP의 극한지지력 비교 (Comparison of Bearing Capacity between SCP and GCP by Unit Cell Model Tests)

  • 김병일;이승원;김범상;유완규
    • 한국지반공학회논문집
    • /
    • 제20권8호
    • /
    • pp.41-48
    • /
    • 2004
  • 이 연구에서는 아직 국내에서는 시공실적이 없는 쇄석다짐말뚝(Gravel Compaction pile)공법의 적용성을 판단하기 위하여 SCP와 GCP의 모형토조시험을 수행하였다. 즉, 원통형 압밀상자(지름 20cm, 높이 40cm)에 치환율 30, 40, 50, 60, 70%로 달리 조성하여 원심력 압밀시험기를 이용하여 압밀시킨 후, 재하시험을 통하여 두 공법의 지지력 특성을 비교 검토하였다. 또한 모형시험을 통해 얻어진 극한지지력을 기존에 제안된 SCP 및 GCP 시공지반의 극한지지력 산정식을 이용한 계산값과 비교하였다. 모형시험 결과 GCP 시공지반이 SCP 시공지반에 비해 지지력 측면에서 더 우수한 것으로 나타났다.

Evaluation of seismic p-yp loops of pile-supported structures installed in saturated sand

  • Yun, Jungwon;Han, Jintae;Kim, Doyoon
    • Geomechanics and Engineering
    • /
    • 제30권6호
    • /
    • pp.579-586
    • /
    • 2022
  • Pile-supported structures are installed on saturated sloping grounds, where the ground stiffness may decrease due to liquefaction during earthquakes. Thus, it is important to consider saturated sloping ground and pile interactions. In this study, we conduct a centrifuge test of a pile-supported structure, and analyze the p-yp loops, p-yp loops provide the correlation between the lateral pile deflection (yp) and lateral soil resistance (p). In the dry sand model (UV67), the p-yp loops stiffness increased as ground depth increased, and the p-yp loops stiffness was larger by approximately three times when the pile moved to the upslope direction, compared with when it moved to the downslope direction. In contrast, no significant difference was observed in the stiffness with the ground depth and pile moving direction in the saturated sand model (SV69). Furthermore, we identify the unstable zone based on the result of the lateral soil resistance (p). In the case of the SV69 model, the maximum depth of the unstable zone is five times larger than that of the dry sand model, and it was found that the saturated sand model was affected significantly by kinematic forces due to slope failure.