• Korean Institute of Interior Design Journal
• /
• v.15 no.3 s.56
• /
• pp.144-154
• /
• 2006

Except the time when relics of a museum are exhibited or loaned to the public, they are stored in a storage. In addition, it is common view that collections are exhibited a few of total stored collections in a museum. Therefore, the environmental condition of a storage is an important factor. Hereby, the purpose of this study is to suggest the design guidelines of a storage for conservation of relics in a museum. The results from this study are as follows briefly. First, location of storages has to be located and centralized above ground against preservation environment and additional renovation. Second, for storage size, It is reasonable to secure long-term experimental data after planning about 20% of whole section in present domestic situation. Third, in order to prevent environmental deterioration due to short storage floor space, adequate storage height has to be secured against a mezzanine deck and spare storages need to be planned. Where a mezzanine deck is designed, detailed plans have to be supported for equal micro climate in a storage. Fourth, in respect of environmental control of storages, finish materials with adjustment ability on relative humidity have to be used after the system is installed jointly direct and indirect way by air chamber, considering domestic condition for management of intermittent ventilation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.10
• /
• pp.4787-4807
• /
• 2016

Although the dense interconnection datacenter networks (DCNs) (e.g. FatTree) provide multiple paths and high bisection bandwidth for each server pair, the single-path TCP (SPT) and ECMP which are widely used currently neither achieve high bandwidth utilization nor have good load balancing. Due to only one available transmission path, SPT cannot make full use of all available bandwidth, while ECMP's random hashing results in many collisions. In this paper, we present OFPT, an OpenFlow based Parallel Transport framework, which integrates precise routing and scheduling for better load balancing and higher network throughput. By adopting OpenFlow based centralized control mechanism, OFPT computes the optimal path and bandwidth provision for each flow according to the global network view. To guarantee high throughput, OFPT dynamically schedules flows with Seamless Flow Migration Mechanism (SFMM), which can avoid packet loss in flow rerouting. Finally, we test OFPT on Mininet and implement it in a real testbed. The experimental results show that the average network throughput in OFPT is up to 97.5% of bisection bandwidth, which is higher than ECMP by 36%. Besides, OFPT decreases the average flow completion time (AFCT) and achieves better scalability.

• Smart Structures and Systems
• /
• v.5 no.1
• /
• pp.43-54
• /
• 2009

This study introduces a novel approach for locating damage in a structure using wireless sensor system with local level computational capability to alleviate data traffic load on the centralized computation. Smart wireless sensor systems, capable of iterative damage-searching, mimic an optimization process in a decentralized way. The proposed algorithm tries to detect damage in a structure by monitoring abnormal increases in strain measurements from a group of wireless sensors. Initially, this clustering technique provides a reasonably effective sensor placement within a structure. Sensor clustering also assigns a certain number of master sensors in each cluster so that they can constantly monitor the structural health of a structure. By adopting a voting system, a group of wireless sensors iteratively forages for a damage location as they can be activated as needed. Since all of the damage searching process occurs within a small group of wireless sensors, no global control or data traffic to a central system is required. Numerical simulation demonstrates that the newly developed searching algorithm implemented on wireless sensors successfully localizes stiffness damage in a plate through the local level reconfigurable function of smart sensors.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.193-199
• /
• 2018

The commonly used delivery system for online merchandise has potential problems, not only missing but also criminal case. Also, the contemporary Kiosk type approach for delivery system has some problems in an initial installation cost, expense of management system and especially security weaknesses in the wireless communication. To resolve these issues, this paper is proposing a securely unmaned smart locker system that can handle up to 64 parcels. This is easily controlled and monitored by a smartphone. In addition to the system, an algorithm is proposed to make the security of wireless communications better. Finally, a method is proposed to minimize the cost of delivery by using centralized server.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.12
• /
• pp.4725-4747
• /
• 2020

Software defined networking (SDN) is considered to be one of the most promising paradigms in the future. To solve the scalability and performance problem that a single and centralized controller suffers from, the distributed multi-controller architecture is adopted, thus forms multi-domain SDN. In a multi-domain SDN network, it is of great importance to ensure a reliable control plane. In this paper, we focus on the reliability problem of multi-domain SDN against controller failure from perspectives of backup controller deployment and controller replication. We firstly propose a placement algorithm for backup controllers, which considers both the reliability and the cost factors. Then a controller replication mechanism based on shared data storage is proposed to solve the inconsistency between the active and standby controllers. We also propose a shared data storage layout method that considers both reliability and performance. Besides, a fault recovery and repair process is designed based on the controller backup and shared data storage mechanism. Simulations show that our approach can recover and repair controller failure. Evaluation results also show that the proposed backup controller placement approach is more effective than other methods.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.261-269
• /
• 2023

We propose to design a Holochain-based security and privacy protection system for resource-constrained IoT healthcare systems. Through analysis and performance evaluation, the proposed system confirmed that these characteristics operate effectively in the IoT healthcare environment. The system proposed in this paper consists of four main layers aimed at secure collection, transmission, storage, and processing of important medical data in IoT healthcare environments. The first PERCEPTION layer consists of various IoT devices, such as wearable devices, sensors, and other medical devices. These devices collect patient health data and pass it on to the network layer. The second network connectivity layer assigns an IP address to the collected data and ensures that the data is transmitted reliably over the network. Transmission takes place via standardized protocols, which ensures data reliability and availability. The third distributed cloud layer is a distributed data storage based on Holochain that stores important medical information collected from resource-limited IoT devices. This layer manages data integrity and access control, and allows users to share data securely. Finally, the fourth application layer provides useful information and services to end users, patients and healthcare professionals. The structuring and presentation of data and interaction between applications are managed at this layer. This structure aims to provide security, privacy, and resource efficiency suitable for IoT healthcare systems, in contrast to traditional centralized or blockchain-based systems. We design and propose a Holochain-based security and privacy protection system through a better IoT healthcare system.

• International Journal of Computer Science & Network Security
• /
• v.24 no.2
• /
• pp.67-78
• /
• 2024

Software-Defined Networking (SDN) is a new emerging networking paradigm that has adopted a logically centralized architecture to increase overall network performance agility and programmability. Combining network virtualization with SDN will guarantees for combined advantages of improved flexibility and network performance. Combining SDN with hypervisors divides the network physical resources into several logical transparent and isolated virtual SDN network (vSDN), where each has its virtual controller. However, SDN hypervisors bring several advantages as well as several challenges to its network operators as for the virtual appliances, their efficient placement, assurance of network performance is mandatory, and their dynamic instantiation with their migration. In this article, we provide a brief and concise review of network virtualization along with its implementation in the SDN network. SDN hypervisors types are discussed, and taxonomy is provided to demonstrate the importance of hypervisors in SDN. A comparison of SDN hypervisors is performed to elaborate on the vital hypervisor software along with their features, and different challenges are discussed faced by the SDN network. A framework is proposed to add combined functionalities of hypervisors to create a more effective and efficient virtual system. The purpose of the framework is to increase network performance through proper configuration of resources, software, control plane isolation functions with defined rules and policies.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.4
• /
• pp.350-357
• /
• 2017

This study was conducted as a post - study on the development of a centralized controller and a hydraulic lift system including structural analysis and remote control for the development of a vertically elevated car. The safety review was carried out through the structural modification of the elevator lift which was developed during the previous research. 3D modeling was performed with Solidworks, and a model of finite element was created through Hypermesh S / W. In addition, the loading environment of the work vehicle for the evaluation is a condition in which the loading amount is 250 kg per position (total, upper, upper, lower, and lower) on the work table, ), The structural analysis was carried out under the condition that the load was 600 kg, and safety was examined in various aspects. As a result, when the allowable load of 250 kg and the excess load of 600 kg are excluded (except Case-11), the stress level is below the yield strength. In the case of Case-11, there is a region exceeding the yield strength at the center support portion of the safety bar at the upper end even after excluding the component which generates the maximum stress, but it does not affect the safety aspect of the whole structure Respectively. Looking at the deflection results, it can be seen that in all cases the maximum deflection occurs in the same table, and the tendency of sagging in both 250 kg and 600 kg is the same.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.95-102
• /
• 2012

In this paper, we propose a method that can construct efficiently a P2P overlay multicast network composed of many heterogeneous peers in communication bandwidth, processing power and a storage size by selecting a peer in a distributed fashion using an ant-colony theory that is one of the computational intelligence methods. The proposed method considers not only the capacity of a peer but also the number of children peers supported by the peer and the hop distance between a multicast source and the peer when selecting a parent peer of a newly joining node. Thus, an P2P multicast overlay network is constructed efficiently in that the distances between a multicast source and peers are maintained small. In addition, the proposed method works in a distributed fashion in that peers use their local information to find a parent node. Thus, compared to a centralized method where a centralized server maintains and controls the overlay construction process, the proposed method scales well. Through simulations, we show that, by making a few high capacity peers support a lot of low capacity peers, the proposed method can maintain the size of overlay network small even there are a few thousands of peers in the network.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.73-82
• /
• 2019

In order to build a smart factory, building a CPPS (Cyber Physical Product System) is an important system that must be accompanied. Through the CPPS, it is the reality of smart factories to move physical factories to a digital-based cyber world and to intelligently and autonomously monitor and control them. But The existing CPPS architectures present only an abstract modeling architecture, and the research that applied the OPC UA Framework (Open Platform Communication Unified Architecture), an international standard for data exchange in the smart factory, as the basic system of CPPS It was insufficient. Therefore, it is possible to implement CPPS that can include both cloud and IoT by collecting field data distributed by CPPS architecture applicable to actual factories and concentrating data processing in a centralized In this study, we implemented CPPS architecture through central OPC UA Server based on OPC UA conforming to central processing OPC UA Framework, and how CPPS logical process and data processing process are automatically generated through OPC UA modeling processing We have proposed the CPPS architecture including the model factory and implemented the model factory to study its performance and usability.